Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  pallad(II)
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The possibility of Pd(II) ions separation from mixtures of Co(II), Ni(II), Cu(II) and Pd(II) ions by solvent extraction was studied, using 1-hexyl-2methylimidazole in chloroform as the extractant. The initial concentration of each ion was 10 mM. The tests were carried out at a temperature of 25°C, at a constant strength of the aqueous solution of I = 0.5, as maintained by the KCl solution. It was demonstrated that differences in the stability and structure of their coordination sphere as well as solubility of complexes with the extractant could be used for separating the Co(II), Ni(II), Cu(II) and Pd(II) ions by solvent extraction. Pd(II), which forms flat-square complexes in the solutions, passes easily into the organic phase and is easier separated from the mixture of Co(II), Ni(II), Cu(II) ions, which form octahedral or tetrahedral complexes. Extraction percentages were calculated. For the respective metals, their values increase for increasing concentrations of the extractant in the aqueous phase. The extraction percentage decreases in the following order: Pd(II) > Cu(II) > Co(II) > Ni(II). In the case of the quaternary mixture, the highest extraction percentage for Pd(II) (70%) was obtained at a pH=7.33. Separation coefficients were also calculated. The highest separation coefficients were obtained for the system: Pd(II)/Ni(II), Pd(II)/Co(II); at a pH of 5.4 for an aqueous solution, their values are 13.3 and 7.7, respectively.
PL
Określono i zinterpretowano izotermy napięcia międzyfazowego dla indywidualnych ekstrahentów palladu(II). Do badań wykorzystano następujące ekstrahenty: 4-alkilofenyloaminy zawierające od 6 do 14 atomów węgla w grupie alkilowej, sulfid diheksylowy, 2-decylosulfanyloetanol i jego częściowo sfluorowana pochodną, decylonikotynian i N.N-diheksylenikotynoamid Napięcie międzyfazowe określano metodą pierścieniową w temperaturze 18-20°C, używając wzajemnie wysyconych faz. Do badań wykorzystano tensometr K-12 firmy Kruss. Ekstrahenty te ulegają adsorpcji na granicy faz: faza organiczna-kwaśny roztwór wodny. 4-alkilofenyloaminy wykazują szczególnie silną aktywność powierzchniową, gdzie obserwuje się znaczne obniżenie napięcia międzyfazowego w zakresie bardzo niskich stężeń aminy w porównaniu do innych badanych ekstrahentów. 4-Alkilofenyloaminy adsorbują się na granicy faz węglowodór/faza wodna już przy stężeniu 10(-5) M i zmniejszają napięcie międzyfazowe do 5 mN m(-1). Dlatego też mogą być wykorzystane jako katalizatory przeniesienia międzyfazowego w celu zwiększenia szybkości ekstrakcji palladu(II) z zastosowaniem innych ekstrahentów. Początkowa szybkość ekstrakcji palladu(II) z zastosowaniem 4-alkilofenyloamin wzrasta znacznie ze wzrostem długości grupy alkilowej od 6 do 12 atomów węgla, co spowodowane jest w sposób wyraźny większą hydrofobowością amin z długim łańcuchem węglowodorowym i wzrostem aktywności międzyfazowej.
EN
Interfacial tension isotherms were determined for individual palladium (II) extractants and interpreted. The following extractants were considered 4-alkylphenylamines containing from 6 to 14 carbon atoms in the alkyl group, dihexyl sulfide, 2-hydroxyethyldecyl sulfide and its partly fluorinated derivative, decylnicotiniate and N,N- dihexyl-nicotinamide. 4-alkylphenylamines exhibit significantly stronger interfacial activity than the other extractants. They adsorb at the hydrocarbon/water interfaces already at concentrations 10(-5) M and permit to decrease the interfacial tension to 5 mN m(-1). As a result, they can be used as a phase transfer catalyst to increase the rate of palladium(II) extraction with other extractants. When used alone, the initial rate of extraction rises with extractant increasing hydrophobicity, thus in the order of increased interfacial activity.
3
Content available remote Spektrofotometryczna nowa metoda oznaczania palladu(II) za pomocą 6-tioksantyny
PL
Opracowano nową metodę oznaczania palladu(II) z zastosowaniem 6-tioksantyny. Oznaczono pallad(II) w zakresie stężenia od 2,0 do 20 mg/cm3 przy optymalnym pH 1,0 - 2,2. Badano wpływ obcych jonów na wyniki oznaczania palladu(II). Ustalono skład tworzenia się kompleksu Pd-TX, który wynosi 4 : 1. Opracowaną metodą oznaczono pallad(II) w katalizatorze palladowym.
EN
A new method for determinatin of palladium(II) with thioxantine has been developed. The determination range of palladium(II) is 2,0 - 20 mg/cm3 at optimal range pH 1,0 - 2,2. The effects of substances and ions on the results of the determination was evaluated. The molar ratio of palladium(II) with tioxantine is 1 : 4. Described method was used for the determination of palladium(II) in catalyst.
4
Content available remote Spektrofotometryczna nowa metoda oznaczania palladu(II) za pomocą 6-tiopuryny
PL
Opracowano nową metodę oznaczania palladu(II) z zastosowaniem 6-tiopuryny. Oznaczono pallad(II) w zakresie stężenia od 1,0 - 10 mg/cm3 przy optymalnym pH 1,0 - 2,0. Badano wpływ obcych jonów na wyniki oznaczania palladu(II). Ustalono skład tworzącego się kompleksu Pd : TP = 2 : 3.
EN
The reaction of 6-thiopurine (TP) with palladium(II) has been applied in spectrophotometric determination of palladium(II). The determination range of palladium is 1,0 - 10 mg/cm3 at optimal pH 1,0 - 2,0. The efects of substance and ions on the results of the determination was evalued. The molar ratio of reaction palladium with 6-thiopurine is 3 : 2.
5
Content available remote Spektrofotometryczna nowa metoda oznaczania palladu(II) za pomocą 6-tioguaniny
PL
Opracowano nową metodę oznaczania palladu(II) z zastosowaniem 6-tioguaniny. Oznaczono pallad(II) w zakresie stężenia od 1,0 - 8 mg/cm3 przy pH od 1,0 - 2,0. Badano wpływ obcych jonów na wyniki oznaczania palladu(II). Ustalono skład tworzącego się kompleksu Pd-TG, który wynosi 1 : 2. Opracowaną metodą oznaczono pallad(II) w katalizatorze palladowym.
EN
The reaction of 6-thioguanine (TG) with palladium(II) has been applied in spectrophotometric determination of palladium(II) in a concentration range 1,0 - 8,0 mg/cm3 at optimal range pH 1,0 - 2,0. The effects of substances and ions on the results of the determination was evaluated. The molar ratio of palladium(II) with thioguanine is 1 : 2. The method was used for the determination of palladium(II) in catalyst.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.