Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 16

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  otwory
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
Drewno klejone warstwowo jest obecnie często wykorzystywane w budownictwie. Najczęściej z drewna klejonego warstwowo wykonywane są dźwigary nośne, w których często ze względów architektonicznych istnieje potrzeba wykonania otworów pod różnego rodzaju instalacje. Otwory te osłabiają sztywność. Coraz bardziej powszechnym rozwiązaniem jest wzmacnianie belek drewnianych podłużnymi elementami kompozytowymi. W artykule przeprowadzono obliczenia numeryczne analizujące wpływ podłużnego zbrojenia kompozytowego w formie prętów BFRP na ugięcie belek z drewna klejonego z otworami.
EN
Glued laminated timber is now often used in construction. Most often, glued laminated timber is used to make load-bearing beams, in which there is often a need for architectural reasons to make openings for various types of installations. These openings weaken the stiffness. An increasingly common solution is to reinforce wooden beams with longitudinal composite elements. The paper presents numerical calculations analyzing the influence of longitudinal composite reinforcement in the form of BFRP bars on the deflection of glued laminated timber beams with openings.
PL
Proces wiercenia materiałów ciągliwych, do których zalicza się Ti6Al4V, często wiąże się z niewystarczającym odprowadzeniem wiórów, co prowadzi do wystąpienia zakłóceń procesu obróbki.
PL
W przemysłowych zastosowaniach obróbek cieplno-chemicznych azotowanie gazowe jest szeroko rozpowszechnioną metodą azotowania. Azotowaniu podlegają elementy o różnych kształtach i wielkościach, m.in. wiertła, frezy, matryce, wały, pierścienie, kulki łożyskowe itp., charakteryzujące się często skomplikowanym kształtem. Aby warstwy azotowane cechowały się dobrymi właściwościami eksploatacyjnymi powinny mieć kontrolowaną grubość zarówno strefy dyfuzyjnej, jak i przypowierzchniowej warstwy azotków żelaza. Przy prawidłowo przygotowanej powierzchni na stalach niskostopowych po azotowaniu otrzymuje się równomierną warstwę azotowaną. W przypadkach, w których trudno prawidłowo przygotować powierzchnię, np. w elemencie o skomplikowanym kształcie czy z cienkimi otworami wewnętrznymi, mogą wystąpić niejednorodności struktury warstwy azotowanej lub nawet całkowity jej brak. Problemem podczas azotowania nie jest zatem powierzchnia zewnętrzna elementów obrabianych lecz wewnętrzna. Celem pracy była ocena możliwości azotowania głębokich otworów o małej średnicy. Badania zrealizowano na walcowych próbkach ze stali niestopowej oraz niskostopowych z wydrążonymi elektroiskrowo i mechanicznie otworami przelotowymi oraz nieprzelotowymi. Na przygotowanych próbkach, w oparciu o przeprowadzone badania metalograficzne i badania twardości, oceniono jakość wytworzonych warstw azotowych.
EN
In industrial applications of thermo-chemical treatments, gas nitriding is a widespread method of nitriding. Elements of various shapes and sizes are nitrided, including drills, cutters, dies, shafts, rings, bearing balls, etc. often characterized by a complicated shape. In order for the layers to have good operational properties they should have a controlled thickness of both the diffusion zone, and the near-surface layer of iron nitrides. With a properly prepared surface on low alloy steels, a uniform nitrided layer is obtained after nitriding. In cases, where it is difficult to prepare the surface properly, e.g. in a complicated shape element or an element with thin internal openings, there may be inhomogeneities in the structure of the nitrided layer or even its complete absence. The problem during nitriding is, therefore not the external surface of the workpieces but the internal one. The aim of the work was to assess the possibility of nitriding deep holes with small diameters. The tests were carried out on cylindrical specimens of unalloyed and low-alloy steel with electro-bored and mechanically hollow through holes and blind holes. The quality of the obtained nitrided layers was evaluated on the prepared samples on the basis of metallographic and hardness tests.
4
Content available remote Drążenie wgłębne
PL
Drążenie wgłębne jest obecnie wykorzystywane w bardzo wielu gałęziach przemysłu, np. lotniczym, motoryzacyjnym czy medycznym zarówno w skali mikro, jak i makro. Dynamiczny rozwój mikrotechnologii powoduje, że bardzo duże znaczenie zaczyna mieć wytwarzanie mikrootworów o średnicach poniżej 1 mm i charakteryzujących się smukłością rzędu 20:1. W wielu przypadkach są one wykonywane w materiałach trudno skrawalnych, co powoduje, że duże znaczenie przy ich wykonywaniu mają technologie niekonwencjonalne, takie jak EDM i ECM.
5
Content available remote Buckling of rectangular plates with different central holes
EN
The behavior of thin rectangular perforated plates under the action of uniform compressive deformation is studied using finite element analysis. The central holes are either circular holes or square holes. The effects of plate-support conditions, plate aspect ratio, hole geometry, and hole size on the buckling strengths of the perforated plates was studied. The results show that for the same plate weight density, the buckling strengths of the plates with square holes generally surpass those of the plates with circular holes over the range of hole sizes.
EN
The dynamic behaviour of thermoplastic samples reinforced with aramid or polyester based nonwoven fabrics has been investigated. Changes in the structural state of specimens through open hole and impact damage could be proved by changes in modal parameters. Furthermore a directionality study has been performed showing clear dependence of modal parameters and fibre orientation. An appropriate frequency band was selected for a robust structural state detection of the samples. Additionally, a special modal hammer device was used to increase the accuracy of determining the modal parameters. This work continues investigations which can serve as a foundation for modal analysis based structural health monitoring (SHM) and quality control systems for composite structures.
PL
Zbadane zostało dynamiczne zachowanie próbek kompozytowych o osnowie termoplastycznej, wzmocnionych włókniną aramidową lub poliestrową. Wykazano, że zmiany w stanie struktury próbek, wywołane wierceniem otworów i uszkodzeniem udarowym, mogą być wykrywane w oparciu o zmiany parametrów modalnych. Przeprowadzono również badania, w których pokazano wyraźną zależność pomiędzy parametrami modalnymi a ukierunkowaniem włókien. Do właściwego wykrywania stanu strukturalnego próbek wybrane zostało odpowiednie pasmo częstotliwości. Dodatkowo zastosowane zostało specjalne urządzenie dla młotka modalnego zwiększające dokładność wyznaczania parametrów modalnych. Praca jest kontynuacją badań, które mogą służyć jako podstawa dla systemu przeznaczonego do monitorowania stanu konstrukcji oraz kontroli jakości, bazującego na analizie modalnej.
EN
In the Czech Republic, the prevention of rock and gas outbursts is carried out in the course of driving mine workings in seams and in sandstone and conglomerate beds classified into a category with the highest degree of rock and gas outburst hazard. It is a case of active methods that aim at prevention of rock and gas outbursts by creating a protection zone in front of and in sides of mine workings being driven and passive methods that mitigate the effects of outbursts (Hudeček et al., 2009, 2010). In this article, authors present recommendations and proposals for changes in rock and gas outburst prevention. These proposed changes should reflect in increased efficiency in coping with this anomalous geomechanical events.
PL
Działania w celu zapobiegania wybuchom skał i gazów w Republice czeskiej podejmowane są już na etapie drążenia wyrobisk w złożach oraz w piaskowcach oraz w pokładach zlepieńców sklasyfikowanych jako lokalizacje o najwyższym stopniu zagrożenia wybuchami skał i gazów. W tym przypadku mamy do dyspozycji metody aktywne, których celem jest zapobieżenie wybuchom skał i gazów poprzez stworzenie strefy ochronnej w części czołowej i bocznych częściach wyrobiska oraz metody bierne, mające na celu złagodzenie skutków wybuchu (Hudecek et al., 2009, 2010). W artykule autor rekomenduje i zaleca dokonanie pewnych zmian w systemie zapobiegania wybuchom skał i gazów. Proponowane zmiany skutkować powinny zwiększoną skutecznością działania w przypadku wystąpienia zjawisk geomechanicznych uznawanych za anomalie.
PL
Obecnie na rynku są dostępne symulatory służące do modelowania zabiegów szczelinowania, uwzględniające trójwymiarowe modele geometrii szczelin. Model szczeliny powstałej w wyniku szczelinowania hydraulicznego może być przeniesiony do symulatora złożowego. W efekcie otrzymuje się model numeryczny opisujący strefę przyodwiertową wraz ze szczeliną wytworzoną w trakcie zabiegu. W przypadku złóż typu shale gas zwykle wykorzystuje się koncepcję polegającą na założeniu, iż powstała siatka szczelin może być reprezentowana przez przestrzenny obszar o zmienionych właściwościach petrofizycznych (ang. stimulated reservoir volume). W pracy pokazano przykład takiego modelowania, wykonanego przez autora z użyciem symulatora ECLIPSE. Przedyskutowano również możliwości i ograniczenia stosowalności uproszczonej metodyki Cinco-Ley.
EN
Modern simulators of hydraulic fracturing respecting 3D geometry of the fractures are now available on the market. Geometry of the fracture can be transferred into reservoir simulator to obtain a model of near-wellbore zone with the fracture. In the case of shale gas reservoirs, fractures network resulting from fracking can be simulated by use of the stimulated reservoir volume (SRV) concept. This paper presents simulation results based on this approach using Eclipse reservoir simulator. Applicability of the simplified Cinco-Ley approach is also discussed.
EN
The work targets are: - additional data analysis, - geological model update, - resources and reserves reevaluation in order to be confirmed, - optimum production scenario set up, - discounted cash flow analysis.
PL
Celem pracy są: - analiza danych dodatkowych, - uzupełnianie modelu geologicznego, - potwierdzające szacowanie złóż i zasobów, - optymalny zestaw produkcyjny, - analiza kosztów.
EN
The work targets, reference date 01.01.2007, are: - additional data analysis: to the study (1998) and confirmed at 01.01.2000 and to the last study at reference date 01.01.2005, - geological model update according to 3D seismic data interpretation performed at the beginnig of the year 2007, - resources and reserves reevaluation in order to be confirmed, - optimum production scenario set up, - discounted cash flow analysis.
PL
Celem przeprowadzonych bada referencyjnych (01.01.2007) były: - analiza dodatkowych danych: do badań (1998) i potwierdzonych 01.01.2000 i do ostatnich badań referencyjnych (01.01.2005), - ulepszenie modelu geologicznego zgodnie z interpretacją 3D danych sejsmicznych wykonanych na początku 2007 r., - potwierdzające oszacowanie zasobów i rezerw, - opracowanie scenariusz optymalnej produkcji, - analiza niższych przepływów pieniężnych.
11
Content available remote Nowe rozwiązanie stropu sprężonego dla budynku hotelowo-konferencyjnego
PL
Choć w ostatnich dziesięcioleciach, na świecie obserwuje się dynamiczny rozwój konstrukcji z betonu sprężonego w budownictwie kubaturowym, to w Polsce realizacje kablobetonowych stropów dużych rozpiętości są niezwykle rzadko spotykane. W artykule skrótowo przedstawiono zalety stosowania płyt sprężonych i opisano typowe rozwiązania konstrukcyjne stropów kablobetonowych. Opisano pierwszą w Polsce realizację kablobetonowego stropu gęstożebrowego w budynku hotelowo-konferencyjnym w Krakowie. Wieloprzęsłowe żeberka stropu sprężone zostały ciągłymi cięgnami bez przyczepności, a odciążenie konstrukcji uzyskano przez wypełnienie lekkimi wkładami styropianowymi. Na przykładzie tej realizacji podkreślono również wagę problemu kształtowania otworów w tego typu konstrukcjach.
EN
Although in recent decades, the world observed a dynamic development of prestressed concrete structures in cubature civil engineering, the realization of large span prestressed floor slabs is extremely rare in Poland. The article summarizes the advantages of using prestressed slabs and describes the typical design solutions for PC floors. The first implementation in Poland of prestressed rib-and-rib slab floor in the conference building in Krakow is presented. Multi-span slab's ribs were prestressed with continuous unbonded tendons, and the relief of the structure was obtained by filling it with light polystyrene inserts. On the example of that realization, the importance of the problem of making openings in such structures was also highlighted.
EN
The origin of overpressures in geological formations is basically related with the burial history of the sediments / rocks. Among the overpressures generating mechanisms we may emphasis clays under compaction and tectonic uplift of sealed tectonic blocks/formations.The main overpressures calculations are obtained both from pressure tests in producing wells, which is the most accurate determination, and from well log data. According with the existent data base we used in our calculations well logs mainly resistivity (p) and velocity /transit time (Deltat) parameters corrected with borehole conditions. Also we had the possibility to compare, respectively shift the well log data with the mechanical cores analysis and drilling history of the wells. These enabled us to depict the origin of overpressures in order to estimate the burial speed and the magnitude of formations uplift. As a case study we calculated the overpressures values for the oil bearing structures from the attenuated diapiric alignment from the Miopliocene Zone of Eastern Carpathians. Calculations were based on Ben Eaton relations adapted for sedimentary basin conditions, respectively a alpha exponent shift for a better correlation with pressure measurements from the wells.The pressure gradients values showed an overpressured interval corresponding to middle and lower miocene deposits where the pressure gradients were about 0.175-0.190 at/m. According the overpressure calculations with the existence of a depositional/erosional hiatus corresponding to middle-upper Miocene (Ba and Sa) we estimated for the studied area (SW - outer part of Eastern Carpathians' inner fore deep flank) a tectonic uplift of more than 2000 m of Miocene formations.
PL
Przyczyn nadciśnienia w formacjach geologicznych należy w zasadzie upatrywać w historii pogrzebania osadów/ skał. Do mechanizmów odpowiedzialnych za powstawanie nadciśnienia należą podlegające kompakcji gliny oraz wyniesienie tektoniczne uszczelnionych tektonicznych bloków/formacji. Wartości nadciśnienia obliczane są na podstawie odczytów ciśnienia w otworach produkcyjnych, co daje bardzo dokładny wynik, oraz z danych pomiarowych. Z istniejącej bazy danych, którą wykorzystaliśmy do pomiarów otworowych, korelowały się jedynie parametry oporności (p) oraz prędkości/czasu przepływu (Deltat) w warunkach otworowych. Autorzy mieli również możliwość porównania lub skorygowania danych pomiarowych na podstawie mechanicznej analizy rdzeni oraz historii otworu. Umożliwiło to opis przyczyn powstania nadciśnienia w celu oszacowania prędkości pogrzebania oraz ustalenia wielkości wyniesienia warstw. Na konkretnym przykładzie obliczono wartości nadciśnienia dla struktur roponośnych w zanikających układach diapirowych w Mioplioceńskiej Strefie Karpat Wschodnich. Obliczenia oparto na zależności Ben Eaton dla warunków basenu sedymentacyjnego, uwzględniając współczynnik przesunięcia alfa umożliwiającego lepszą korelację z ciśnieniem pomierzonym w otworach. Wartości gradientów ciśnienia wskazywały na istnienie interwału z nadciśnieniem odpowiadającego warstwom dolnego i środkowego miocenu, gdzie gradienty ciśnienia wynosiły ok. 0,175-0,190 at/m. Opierając się na obliczeniach nadciśnienia, wraz z istniejącymi szczelinami osadowymi/erozyjnymi odpowiadającymi środkowemu i górnemu miocenowi (Ba i Sa) autorzy oszacowali na badanym terenie (południowo-zachodnia zewnętrzna część brzegu wewnętrznej części przedgórza Karpat Wschodnich) wyniesienie tektoniczne ponad 2000 m warstw mioceńskich.
EN
The aim of this project is to calculate bottom hole injection pressure versus depth while gas injection for pressure maintenance of Tengiz field in order to determine injectivity of various reservoir layers (Bash, Serp, Okskey).The mail objective is to develop correlations for the 7 active injection wells to predict bottom hole injection pressures at the end of the tubing, middle of Bash, middle of Serp, and middle of Oksky. Each well will have its own individual correlation. These correlations based on factors such as depth, temperature, pressure and rate. As a result, there are some deviations of predicted pressure versus measured pressure. I think, the basic reason is that we have different approximate gas injection rates. So we can't exactly determine its volume.
PL
Celem projektu jest obliczenie ciśnienia zatłaczania na dnie otworu w funkcji głębokości w trakcie zatłaczania gazu w celu utrzymania ciśnienia w złożu Tengiz oraz określenie zdolności iniekcyjnych poszczególnych warstw złoża (Bash, Serp, Okskey). Podstawowym celem jest określenie korelacji dla siedmiu istniejących otworów iniekcyjnych oraz oszacowanie ciśnienia zatłaczania na dnie otworu na końcu rur (środkowy Bash, środkowy Serp, środkowy Okskey). Dla każdego otworu wylicza się indywidualną korelację na podstawie wartości głębokości, temperatury, ciśnienia i wydatku. W wyniku tego powstają odchylenia przewidywanej wartości ciśnienia w funkcji zmierzonego ciśnienia. W opinii autorów podstawowym powodem tego są różne szacowane prędkości zatłaczania, w zawiązku z czym trudne jest precyzyjne oszacowanie zatłaczanych objętości.
EN
The knowledge of elastic parameters, especially of P-wave and S-wave velocities as a function of depth, is important for interpretation of seismic waves and well log data. Information on velocities of P and S waves is obtained from quantitative interpretation of acoustic full waveforms recorded in a borehole in addition to standard PA measurements. When acoustic full-waveform data are not acquired in boreholes, one of methods for calculating P-wave and S-wave velocities is their estimation with the use of theoretical models of porous media. This requires introduction of several lithological and reservoir parameters of rocks that are obtained from interpretation of well log data. Other methods of S-wave velocity calculation is based on statistical relationships between velocities of both types of waves obtained on the basis of laboratory studies. In this paper, the theoretical Biot-Gassmann's and the Kuster-Toksöz's models are briefly described and results of calculations of P-wave and S-wave velocities are given. The empirical relationships between VP and VS, which are applied in many computer programs used by major geophysical companies, were also analysed.
PL
W pracy przedstawiono wyniki analizy wpływu otworów, ich wielkości i położenia na zmianę sztywności typowych ścian konstrukcyjnych budynków prefabrykowanych o średniej wysokości (5-kondygnacyjnych). Oceny tych zmian dokonywano przez porównanie częstotliwości drgań własnych ścian z otworami i odpowiednich częstotliwości drgań ścian bez otworów. Rozważono ściany o szerokości 2,7 m, 5,4 m, 11,7 m i wysokości 14 m. Do obliczeń przyjęto model tarczowy ściany żelbetowej o złączach sztywnych i zamocowaniu w poziomie stropu piwnicy. Analizę numeryczną przeprowadzono metodą elementów skończonych. Stwierdzono, że tworzenie nowych otworów drzwiowych lub ich poszerzanie może mieć znaczny wpływ na zmianę częstotliwości drgań własnych, a więc także sztywności rozważanych ścian.
EN
Throughout SW Fennoscandia, numerous approximately W-E trending faults and ductile shear zones have recently been recognized. The regiona--scale zone of strike-slip displacements [Mazury lineament] with a dextral component was referred by many authors as apparently influenced by the distribution of ca. 1.6-1.4 Ga old "anorogenic" intrusions of the Mazury Complex [NE Poland]. However, new detailed structural and kinematics studies of drill-cores from 255 boreholes located throughout NE Poland and SW Lithuania [Lazdijai region] indicate that the Mazury Complex, the Suwałki Anorthosite Massif and surrounding lithotectonic domains share a common ductile thrusting deformation, calling into question the concept of a large-scale dextral shear zone and also the "anorogenic" origin hypothesis of the Mazury Complex. One important advance has been the accumulation of structural and kinematics information that allows assessment of the main orogenic transport direction commonly towards the SW, locally to the NE [e.g., in the eastern part of the Suwałki Anorthosite Massif]. This assessment has been coupled with the recognition of the role of major and numerous ductile shear zones within the western part of the East European Platform. In general, compressional deformation with ductile thrusting predominated in the western part of the East European Platform. Very probable strike of regional mylonitic foliation [S1] from almost 100 boreholes has been established, based on geophysical measurements of the curvature of borehole axis and a few tens oriented core samples [SW Lithuania]. It is assumed that the crystalline rocks of NE Poland and SW Lithuania [Lazdijai region] were subjected to similar ductile thrusting to transpressional deformation during the late Gothian [or newly defined Dano-Polonian] orogeny [ca. 1.5 Ga].
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.