The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 105 particles/cm3 for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.
The primary aim of the study was to analyse the non-steady state of filtration for selected electrostatic filter materials designed for use in respiratory protective devices. The obtained results showed that the filtration process in electrostatic filters was dependent in the main on the following factors: type of the filter material, electrostatic field strength of the material, and the charge of the aerosol. To a lesser degree the filtration process depended on the sign of the charge and the relative humidity of the air. A significant correlation was found between the increase in the penetration and the decrease in reathing resistance while the filter was being loaded. The effect of resuspension (tearing off and re-deposition of dust agglomerates inside the filter) on the filtration process very significant. It was also observed that under certain conditions electrostatic filter materials lost their protection properties.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.