Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 47

Liczba wyników na stronie
first rewind previous Strona / 3 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  nuclear magnetic resonance (NMR)
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 3 next fast forward last
EN
Metabolomics approaches allow systematic identification and quantitation of all metabolites in biological samples analyzes. As already known metabolism is directly or indirectly related to every aspect of cell function, therefore a careful observation of every changes taking place in metabolism, for example endogenous biochemical reaction products, reflectsthe phenotype of any living cell. Monitoring the metabolite profiles using metabolomics technologies, especially nuclear magnetic resonance (NMR) spectroscopy based on cell culture, allows us to evaluate drug efficiency and outcome of experimental therapy, and most importantly, it allows us to monitor the reaction of the model cell lines to a given treatment. The continued development of metabolomic approaches, e.g. analytical technique, or chemometric software, will accelerate the widespread use of metabolomics not only in the clinical field but also in different biological fields. This work presents a use of nuclear magnetic resonance to characterize and understand the cellular metabolome in a wide range of pathophysiological and clinical contexts.
2
Content available Metody określania struktury polisacharydów
EN
Sequencing of polysaccharides is difficult to achieve because of the heterogeneous nature of the polysaccharide structure, high molecular weight (the size of a polysaccharide varies between approximately 16,000 and 16,000,000 daltons (Da)), and polydispersity of the polymer chains. The following information is essential to determine the primary structure of a polysaccharide: • monosaccharide composition: nature and molar ratios of the monosaccharide building blocks; • relative configuration of monosaccharides: d or l; • anomeric configuration: α- or β-configuration of the glycosidic linkage; • ring size: presence and distinction of furanosidic and pyranosidic rings; • linkage patterns: linkage positions between the monosugars and branches; • sequences of monosaccharide residues in the repeating units; • substitutions: position and nature of OH–modifications, such as O–phosphorylation, acetylation, O-sulfation, etc.; • molecular weight and molecular weight distribution. A polysaccharide extracted from plant materials or food products is usually purified before being subjected to structural analysis. The first step of characterizing a polysaccharide is the determination of its purity, which is reflected by its chemical composition, including total sugar content, level of uronic acids, proteins, ash, and moisture of the preparation. The second step is the determination of monosaccharide composition, which will unveil structural information such as the number of monosaccharides present in the polysaccharide and how many of each sugar unit. NMR spectroscopy has become the most powerful and noninvasive physicochemical technique for determining polysaccharide structures. It can provide detailed structural information of carbohydrates, including identification of monosaccharide composition, elucidation of α- or β-anomeric configurations, establishment of linkage patterns, and sequences of the sugar units in oligosaccharides and/or polysaccharides. Monosaccharide composition can be determined also by analysis of totally acid hydrolyzed polysacharide using high performance liquid chromatography (HPLC) or gas chromatography (GC). The ring size and glycosidic linkage positions of sugar units in a polysaccharide could be established by methylation analysis and/or cleavage reduction. The anomeric configuration is conventionally determined by oxidation, and this method can be combined with mass spectrometry to obtain more structural information.
PL
Trzy metody pomiarów laboratoryjnych opartych na różnych procesach fizycznych, tj. porozymetrię rtęciową, badania z wykorzystaniem zjawiska magnetycznego rezonansu jądrowego oraz adsorpcję i desorpcję par azotu wykorzystano do badania fizycznych własności skał mułowcowych wieku sylurskiego i ordowickiego z obszaru syneklizy bałtyckiej. Do analiz włączono także inne parametry, np. gęstość i TOC. Wartości parametrów dla wybranych próbek przedstawiono w tabeli i na wykresach dla zilustrowania różnorodności badanych mułowców ogniwa Jantaru i formacji Sasina.
EN
Three methods based on different physical phenomena, i.e. mercury porosimetry, NMR experiment and adsorption/desorption of nitrogen vapors were used to determine various parameters of the Silurian and Ordovician mudstones from the Baltic Syneclize. Selected other parameters like density and TOC were included into analyses. Values of parameters for the selected samples were presented in the table and in the plots to illustrate variability of Mudstones from the Jantar Member and Sasino Formation.
EN
The aim of this study was an extensive NMR analysis of 3,3’,4,4’-diaminoazoxyfurazan (DAAF) obtained by a new method that involves oxidation of 3,4-diaminofurazan to DAAF using a H2O2/HCOOH mixture. The raw product, after washing with water and drying, was min. 98% pure. We present proton, carbon and nitrogen NMR spectra of the prepared DAAF. Detailed analysis of the nitrogen spectrum gave interesting information about aromaticity of the substituted furazan rings.
EN
Unfortunately, despite of work involved in understanding of the mechanism of bacterial virulence, especially Staphylococcus aureus, it has not been developed effective therapy against this bacteria. The first antibiotic used against this bacteria was penicillin, which was discovered by Alexander Fleming in 1928. A new generation of drugs introduced into therapy against Staphylococcus aureus and other Gram-positive bacteria are glycopeptide antibiotics. The most widespread and most commonly used are vancomycin and teicoplanin, discovered respectively in 1956 and 1978. As a result of frequent use of vancomycin VISA (ang. Vancomycin-intermediate Staphylococcus aureus) and VRSA (ang. Vancomycin-resistant Staphylococcus aureus) strains were discovered. The mechanism of action of this antibiotic based on the inhibition of the biosynthesis of bacterial cell wall peptidoglycan fragment. Forming stabilized by hydrogen bonds complex with terminal fragment of peptidoglycan (dipeptide d-Ala-d-Ala) vancomycin prevents its further crosslinking [2] (Fig. 1). However, in recent years other theories of the mechanism of action of glycopeptide antibiotics against Gram-positive bacteria were presented it seems to be crucial to find methods of selection of new antibiotics and for this purpose standard techniques of the analysis, including isothermal titration calorimetry (ITC) [3], nuclear magnetic resonance spectroscopy (NMR) [8–15], high performance liquid chromatography (HPLC) [16], capillary electrophoresis [17] or self-assembled monolayers (SAMs) [22] are used. Discovering new methods for studying of interaction between vancomycin and Gram-positive bacterial cell wall allows use it as a new technique for rapid selection of potential new antibiotics, including glycopeptide derivatives.
EN
The changes taking place with the corrosion-resistant coating, but not the state of the surface subjected to corrosion are investigated in this paper in contrast to traditional approaches. We used the method of nitrogen relaxometry NQR and multi-exponential inversion of decay of longitudinal and transverse components of the nuclear magnetization is applied for the first time for this purpose. The results of experimental studies of changes in the distributions of spin-spin and spin-lattice relaxation of crystallite powder of sodium nitrite and urotropin, the mixture of which is used as a corrosion inhibitor of ferrous metals are considered.
PL
Oceniono przydatność techniki spektroskopii 1H NMR do charakterystyki zmian w strukturze chemicznej substancji naftowych (olej napędowy i ropa naftowa) oraz odpadowej smoły gazowniczej zachodzących w procesie ich biodegradacji. Proces biodegradacji prowadzono przez 14 dób, wykorzystując szczepy bakterii wyizolowane z gleby skażonej produktami naftowymi. Skuteczność biodegradacji była zróżnicowana i w przypadku oleju napędowego wynosiła 89%, ropy naftowej – 45% i smoły gazowniczej – 26%. Analiza widm 1H NMR substratów wykazała duże różnice w rozkładzie protonów alifatycznych i aromatycznych między próbkami naftowymi i smołą gazowniczą. Substraty naftowe charakteryzowały się około 3-krotnie mniejszym współczynnikiem aromatyczności (fA=0,12 i 0,14) oraz wzrostem wartości tego parametru w produktach biodegradacji. Potwierdza to obecność w substancjach naftowych składników alifatycznych, łatwo ulegających biodegradacji. Duże różnice wartości parametru fA wskazują, że może być on wykorzystany do różnicowania źródeł zanieczyszczeń węglowodorowych w próbkach środowiskowych. Dodatkową zaletą techniki 1H NMR jest mała ilość analitów potrzebna do analizy oraz fakt, że należy do grupy badań nieniszczących.
EN
Suitability of 1H NMR spectroscopy for evaluation of changes in chemical structure of petroleum substances (diesel and crude oils) and coal tar waste upon their biodegradation was assessed. Biodegradation was carried out for 14 days using bacterial strains isolated from petroleum-contaminated soil. Biodegradation effectiveness varied, amounting to 89% for diesel oil, 45% for crude oil and 26% for coal tar. 1H NMR spectra analysis demonstrated major differences in the distribution of aliphatic and aromatic protons between petroleum samples and coal tar. The aromaticity factor of petroleum substrates was about 3 times lower (fA=0.12 and 0.14) and it increased in the biodegradation products. This confirms presence of aliphatic components, readily biodegradable, in petroleum substances. Major differences in the fA parameter values indicate that it can be used to differentiate between the sources of hydrocarbon contamination in environmental samples. An additional advantage of the 1H NMR technique is a small amount of analyte required for analysis and the non-destructive character of the technique.
EN
In this work we show the possibility of using of nuclear magnetic resonance at low magnetic fields for the purpose of establishing a system of automated process of control and quality of dairy products.
PL
W pracy przedstawiono możliwość użycia jądrowego rezonansu magnetycznego dla słabych pól magnetycznych do stworzenia zautomatyzowanego systemu kontroli procesu i jakości produktów mlecznych.
9
PL
Pomiary PFG-NMR (pulsed-field gradient nuclear magnetic resonance) na próbkach skał nasyconych solanką dostarczają ważnych informacji na temat geometrii struktury porowej. Obserwacje samodyfuzji protonów umożliwiła sekwencja pomiarowa PFGS oparta na echu stymulowanym. Badania zrealizowano dla trzynastu próbek piaskowców nasyconych solanką 50 g/l. Wyniki pomiarów dyfuzyjnych wykorzystano do opracowania modeli matematycznych umożliwiających szacowanie przepuszczalności skał.
EN
Self-diffusion stimulated echo PFG-NMR measurements of brine saturated rock samples yield important information aboutpore structure geometry. Measurements were conducted on 13 sandstone samples saturated with 50 g/l brine. The results of the diffusion measurements were used for the development of mathematical models to allow the estimation of rock permeability.
PL
Celem przeprowadzonych badań było porównanie informacji uzyskanych z pomiarów następującymi metodami: porozymetrii rtęciowej, jądrowego rezonansu magnetycznego i rentgenowskiej mikrotomografii komputerowej. Przebadane zostały próbki piaskowca czerwonego spągowca facji eolicznej rdzenia wydmy. W badaniach wykorzystano dwa nowe parametry otrzymane z analizy obrazu przestrzennego odwzorowującego strukturę porową próbek skał, tj.: charakterystykę Eulera i średnią długość cięciwy, które zostały obliczone w programie MAVI. Następnie skorelowano je z parametrami otrzymanymi z pozostałych metod.
EN
The aim of the study was to compare the information obtained from mercury porosimetry, nuclear magnetic resonance and X-ray computed microtomography methods. The samples tested were from Rotliegend sandstone of aeolian core dunes deposits. In this paper two new parameters obtained from pore structure spatial image analysis were used: Euler number and mean chord length calculated with the use of MAVI software. These parameters were correlated with the parameters obtained with other methods.
11
EN
The paper presents the automated system of control of certain elements of the hydrodynamic system related to the production of liquid milk. Similar systems may find application in various fields of engineering, such as: hydro power station construction; oil refineries construction; control systems in various chemical industries containing hydrogen atoms in the final product; in propellant flow rate systems, etc., whenever it is required to control hydrodynamic parameters by means of nuclear magnetic resonance on the relevant atoms of the products used.
PL
Artykuł prezentuje zautomatyzowany system sterowania wybranymi elementami systemu hydrodynamicznego wykorzystywanego przy produkcji mleka. Podobne systemy mogą znaleźć zastosowanie w innych obszarach zastosowań, np. hydroelektrowniach, rafineriach, zakładach chemicznych, układach paliwowych, itp., gdzie jest wymagane kontrolowanie parametrów hydrodynamicznych za pomocą jądrowego rezonansu magnetycznego.
12
Content available remote Currents induced by standard movements in a 3T static magnetic field
EN
MRI magnets generates strong and uniform magnetic fields within the field of view, but spatial field gradients are present outside this central region, and as consequence people moving within magnet room experience time-varying magnetic field inducing electric fields and currents in tissues. Aim of this study is the assessment, through direct static field measurements and model based calculations, of induced currents at trunk and head as effect of translating or rotational body movement within the magnet room.
PL
Urządzenie do rezonansu magnetycznego generuje bardzo silne stałe pole magnetyczne w polu obserwacji ale gradient przestrzenny pola istnieje na zewnątrz pola obserwacji. Konsekwencją tego jest narażenie osób poruszających się w wewnątrz pomieszczenia na ekspozycję w polu elektromagnetycznym, co skutkuje indukowaniem się pola elektrycznego i prądów w ich tkankach. Celem artykułu jest oszacowanie poprzez pomiary stałego pola magnetycznego oraz symulację komputerową wartości prądów indukowanych w tułowie i głowie osób poruszających się w pomieszczeniu.
PL
Przedmiotem analizy były wybrane parametry petrofizyczne wyznaczone na podstawie badań laboratoryjnych i geofizyki otworowej w celu określenia porowatości dynamicznej i przepuszczalności skał piaskowcowo-ilastych. Przepuszczalność i porowatość były podstawą podziału badanych skał na grupy o podobnych zdolnościach do przepływu na podstawie obliczonego parametru FZI. Połączono średnią wartość czasu relaksacji T2 i porowatość ogólną wyznaczoną z badań magnetycznego rezonansu jądrowego z parametrem FZI oraz porowatością ogólną wyznaczoną z kompleksowej interpretacji geofizyki otworowej. Związki między porowatością i przepuszczalnością o wysokich współczynnikach korelacji w grupach o stałym FZI mogą być podstawą wyliczenia ciągłych profilowań przepuszczalności.
EN
Selected parameters obtained from laboratory measurements and logging related to reservoir properties of sandy-shaly rocks were discussed to find reliable way to determine dynamic porosity and permeability. Data set of permeability and helium porosity from cores of the Miocene sandstone-claystone-mudstone formation was divided into groups of similar hydraulic ability defined using Flow Zone Index. Mean T2 relaxation time and porosity from NMR lab measurements were combined with Free Fluid Index and total porosity from NMR logging. Close relationships between lab origin data and log origin data inside of parts of rock formation selected according to FZI were established. The relationships may be the basis for continuous permeability and porosity determination in a rock formation profile.
PL
W niniejszej publikacji przedstawiono wyniki pilotażowych badań próbek skał pochodzących z gazonośnych formacji łupkowych. Na podstawie tego eksperymentu stwierdzono, że w procesie interpretacji pomiarów NMR najważniejszym zagadnieniem jest wyznaczenie średniej wielkości czasu odcięcia T/2G1. Jego wartość dla badanych łupków równa była 1 ms. Magnetyczny rezonans jądrowy to zjawisko pochłaniania rezonansowej energii elektromagnetycznej w ciałach stałych, cieczach i gazach związane z magnetycznymi własnościami jąder atomów. Obserwowane jest w silnym stałym polu magnetycznym, na które nakłada się znacznie słabsze zmienne pole magnetyczne o częstotliwości radiowej [5]. Siła pól magnetycznych wykorzystywanych w NMR zależy od użytej metody. Zastosowania chemiczne wykorzystują pola magnetyczne o sile aż do miliona razy większej niż ziemskie pole magnetyczne mierzone na równiku. W przeciwieństwie do tego, zastosowania w przemyśle naftowym wymagają użycia metod NMR o znacznie mniejszym natężeniu pola magnetycznego.
EN
Examinations performed by means of nuclear magnetic resonance (NMR) technology allow to resolve many key problems in the scope of hydrocarbon resources exploration and development. NMR method services for oil industry include determination of total and effective porosity coefficient, as well as distribution analyses of rock pore space saturation with fluid. The study presents results of pilot examinations of rock samples originating from gas- bearing shale formations. It has been found on the grounds of this experiment that the most important issue during NMR measurement interpretation process, is determination of T/2G1 cut-off time mean value, which was equal to 1 ms for shale gas under examination.
PL
Celem pracy było przedstawienie szerokich możliwości scharakteryzowania geometrii przestrzeni porowej skał zbiornikowych dla ropy naftowej i gazu ziemnego poprzez wykorzystanie w badaniach laboratoryjnych dwóch nowoczesnych metod: jądrowego rezonansu magnetycznego (NMR) oraz mikrotomografii rentgenowskiej (micro-CT). Pierwsza z tych metod, wykorzystująca zjawisko magnetycznej relaksacji jąder wodoru w płynie złożowym nasycającym przestrzeń porową skały oraz w wodzie związanej z minerałami ilastymi, pozwala określić różnego typu porowatości i nasycenia, co już pozwala na wnioskowanie o zbiornikowych parametrach skały. Druga zaś metoda - mikrotomografii rentgenowskiej - daje możliwość przestrzennej wizualizacji struktury porowej poprzez dostarczanie wysokorozdzielczych, trójwymiarowych obrazów, pozwalając m.in. na określenie wielkości porów, ich krętości oraz zdolności do oddawania płynów złożowych. Wykorzystanie obu metod w badaniach rdzeni wiertniczych zwiększa wiarygodność uzyskiwanych charakterystyk petrofizycznych i filtracyjnych ośrodka skalnego, ale także daje możliwość szerszego spojrzenia na wiele problemów związanych z wieloznacznością wyników interpretacji profilowań geofizyki wiertniczej. Materiał badawczy stanowiły rdzenie wiertnicze z pięciu otworów, zlokalizowanych w rejonie na północ i północny-zachód od Poznania. Reprezentowały one utwory górnego czerwonego spągowca, wykształcone jako piaskowce facji eolicznych, osady jeziorne facji plaji oraz przewarstwienia osadów fluwialnych. Wyniki badań pozwoliły na wyróżnienie trzech grup skał o bardzo zróżnicowanych właściwościach, które przede wszystkim odnosiły się do różnego typu osadów. Uzyskano obszerny materiał doświadczalny, który powinien być wykorzystany w procesie poszukiwania złóż węglowodorów w rejonie Poznania, w utworach czerwonego spągowca.
EN
The objective of the study was presentation of broad capabilities of reservoir rocks pore space geometry characterization for oil and natural gas, through use of two advanced methods, Nuclear Magnetic Resonance (NMR) and X-ray computer microtomography (micro-CT) in laboratory experiments. The first of these methods, using phenomenon of hydrogen nuclei magnetic relaxation in reservoir fluid, saturating pore space of a rock, and in water bond in clay minerals, enables determination of various types of porosities and saturations, which itself enables inferring reservoir parameters of the rock. Whereas the second method, X-ray computer microtomography (micro-CT) provides possibility of pore structure spatial visualization, by delivering high-resolution, three-dimensional images, which enables, among others, determination of pore sizes, their tortuosity and capability for reservoir fluids production. Utilization of both methods for examination of drill cores increases reliability of obtained petrophysical and filtration characteristics of rock formation, but also enables possibility of wider insight into many problems connected with ambiguity of geophysical logging results interpretation. Drill cores originating from five boreholes, located within area north and north-west of Poznań were used as research material. They represented Upper Rotliegend formations, formed as Aeolian facies sandstones, lacustrine deposits of playa facies and interbedding of fluvial deposits. The results of examinations enabled to distinguish three rock groups of highly differentiated properties, which first of all were related to various types of deposits. Extensive experimental material has been obtained, which should be used in process of exploration for hydrocarbons within Poznań area, in Rotliegend formations.
PL
W pracy zaproponowano nową metodę wyznaczania czasów granicznych, tzw. T2 cut-off, do interpretacji wyników pomiarów NMR. Przedmiotem analizy jest rozdzielenie przestrzeni porowej na część nasyconą wodą związaną w minerałach ilastych, wodą kapilarną i wodą swobodną. Standardowo w interpretacji rozkładów czasów relaksacji poprzecznej stosuje się czasy graniczne T2 znane z literatury, a wyznaczone dla skał określonego typu. Zaproponowano wyznaczenie indywidualnych czasów granicznych dla skał o określonej litologii i stratygrafii przy pomocy programu Dystrybucja. Zastosowano dopasowanie do sumarycznych rozkładów czasów relaksacji krzywych Gaussa i Weibulla w wyznaczonych odcinkach oraz krzywej sumarycznej. Przedstawiono metodykę nowej metody interpretacji i zaprezentowano wyniki na przykładach skał klastycznych z rejonu niżu polskiego oraz skał węglanowych z rejonu Karpat Zachodnich.
EN
In this paper we extend methodology of NMR signal analysis. We propose a new method to compute TZ cut-offs from NMR measurements. The main analysis object was to differentiate between the movable medium, capillary water and water bound in clay minerals. In literature we can find standard TZ cut-offs which separate rock pore space. Unfortunately, standard cut-offs value often are different then real value for specific rock type. Distribution program was developed for dividing rocks with respect to the type of pore space, on the basis individual T2 cut-offs. New, improved method of processing NMR data is based on special fitting of several selected exponents (Gaussian or Weibull distribution). We measured and interpreted a several dozen samples. In this paper we present only examples from Polish lowland and the Western Carpathians.
PL
W artykule przedstawiono sposób wykorzystania zjawiska samodyfuzji protonów do badania krętości porów metodą PFG-NMR. Obserwacje samodyfuzji umożliwiła sekwencja pomiarowa PFGE oparta na echu stymulowanym. Badania zrealizowano dla dziewięciu próbek piaskowców nasyconych solanką 50 g/l oraz dla samej solanki, wykorzystując w tym celu spektrometr Maran 7 firmy Resonance (7,9 MHz). W celu weryfikacji wyników pomiarów dyfuzyjnych wykonano badania pomocnicze, w tym - wyznaczenie krętości porów metodą elektryczną oraz pomiar przepuszczalności absolutnej. Uzyskane rezultaty potwierdziły możliwość wykonywania tego typu pomiarów na posiadanym sprzęcie.
EN
1H time-dependent self-diffusion coefficients as measured by means of pulse field gradient magnetic resonance allow to obtain tortuosity of pores in brine saturated rock samples. Nine sandstone samples characterized by different pore structure saturated with 50 g/l brine and the brine alone were measured using MARAN 7 (Resonance In-struments, Great Britain) NMR console operating at 0.186T (probe tuned at 7.9 MHz for 1H). In order to verify the diffusion measurement results, additional investigations, that is, tortuosity estimation by electrical methods and absolute permeability measurements were conducted.
EN
In recent times, a large number of radiocarbon dates appeared for the Southern Neolithic on the basis of pottery dating because other organic matter has practically not been preserved. There are two organic fractions of pottery useful for dating: food residues and carbon from the pottery matrix itself. Food residues are often dated, but this material is not always preserved and is prone to being removed during the cleaning of the pottery. The clay mass of the pottery contains carbon, often directly visible upon breaking of the pottery. The article focusses on determining the chemical com-position of the organic fractions in the pottery and the origin of the carbon. For this aim we used the nuclear magnetic resonance (NMR) method to identify the chemical compounds in the food residue and in the pottery matrix. As an example we used pottery from the Neolithic sites: Zamost'e (Central Russia) and the Varfolomeevskay sites (Southern European Russia, Low Volga region) from archaeological collections. The results obtained demonstrate that the food residue and the pottery matrix contain practically the same organic compounds, even if the relative abundances of various compounds are different in these materials. The origin of the carbon from pottery is discussed.
EN
The aim of the study was pore space evaluation of Upper Rotliegend Aeolian sandstones, originating from five boreholes, based on X-ray microtomography (micro-CT) and nuclear magnetic resonance (NMR) data. Results of examinations obtained by means of these two methods, as well as complex interpretation of all analyzed parameters enabled us to find that in general Aeolian sandstones of A2 dune facies feature the best petrophysical parameters, while depositional lacustrine sediments of P2 sandy playa facies and P1 marginal playa, which are considered sealing rocks, feature the worst petrophysical parameters. Observation of parameter changes within individual vertical sections of analyzed wells leads to a conclusion that Aeolian sandstones within R region are distinguished with the poorest petrophysical parameters in the ceiling and central parts of Upper Rotliegend sections. Improvement of petrophysical parameters takes place within the bottom parts of the sections. To the North of R Uplift in G-1 and O-3 wells, petrophysical parameters of Aeolian sandstones are improving, despite the occurrence of playa lacustrine sediments within the ceiling parts of the sections.
PL
Celem opracowania była ocena przestrzeni porowej piaskowców eolicznych górnego czerwonego spągowca, pochodzących z pięciu otworów wiertniczych, w oparciu o dane mikrotomografii rentgenowskiej (micro-CT) i jądrowego rezonansu magnetycznego (NMR). Wyniki badań uzyskane tymi dwoma metodami oraz kompleksowa interpretacja wszystkich analizowanych parametrów pozwoliła na stwierdzenie, że piaskowce eoliczne wydmowe facji A2 posiadają najlepsze parametry petrofizyczne, natomiast osady depozycyjne jeziorne facji plaji piaszczystej P2 i plaji brzeżnej P1 - uważne za skały uszczelniające - charakteryzują się najgorszymi właściwościami petrofizycznymi. Z obserwacji zmian tych parametrów w poszczególnych profilach pionowych analizowanych otworów wynika, że w rejonie R piaskowce eoliczne wyróżniają się najniższymi parametrami petrofizycznymi w częściach stropowych i środkowych profili górnego czerwonego spągowca. W częściach spągowych tych profili następuje poprawa parametrów petrofizycznych. Na północ od wyniesienia R w otworach G-1 oraz O-3, pomimo występowania w częściach stropowych profili osadów jeziornych plaji, parametry petrofizyczne piaskowców eolicznych poprawiają się.
first rewind previous Strona / 3 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.