Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Foundry Engineering

2 2014

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: nowoczesne materiały odlewnicze

Sortuj według:

Ogranicz wyniki do:

Characteristic of Cast Zn-Al-Cu Alloy Microstructure after Modification

Krupińska B., Krupiński M., Rdzawski Z., Labisz K., Król M.

Archives of Foundry Engineering

2014

Vol. 14, iss. 4 spec.

77--82

Cast zinc alloys have similar properties to aluminium alloys. The differences are due to the lower melting point and higher density. Zinc has a density of 7.14 g/cm3, a melting point of 419.5°C and the boiling temperature of 906º C. In the temperature range from 150 to 200°C, zinc has good susceptibility to plastic deformation. It is also resistant to atmospheric factor influence, but is not resistant to acids. The main use of zinc alloy, is the production of thin-walled casts that require high precision. Zinc alloys are also used for die casting moulds, housings and covers as well as a variety of devices that are used in the precision industry, electrical engineering, automotive and construction industry. Properly performed chemical modification leads to improve of properties of the produced castings. Therefore it is very important to know how the cast structure with the change of the chemical composition by adding metallic modifiers to the liquid metal. In this work there was studied the effect of chemical modification of cast zinc alloy on the properties and microstructure of the alloys before and after modification. Modified alloys were prepared by adding modifiers in the range of 0.1% to 1% in form of Ti- Sr and B as aluminium master alloy and then cast into the metal moulds. Next the thermo-derivative analysis was performed of the modified Zn-Al-Cu alloy, the microstructure investigation was carried out using light microscopy and scanning electron microscopy with EDS X-ray microanalysis usage as well as hardness was measured of the modified Zn-Al-C alloys.

Analiza wybranych właściwości utwardzanych mikrofalowo mas formierskich wiązanych spoiwami na bazie skrobi

Kaczmarska K., Grabowska B., Drożyński D.

Archives of Foundry Engineering

2014

Vol. 14, iss. 4 spec.

51--54

Celem przeprowadzonych badań było określenie wybranych właściwości utwardzonych mikrofalowo mas formierskich ze spoiwami na bazie skrobi. Efektywność wiązania ziaren osnowy określono w oparciu o wyniki oznaczenia płynności, przepuszczalności, ścieralności oraz wytrzymałości na zginanie i rozciąganie masy utwardzonej. Dokonano wstępnej oceny zasadności mikrofalowego utwardzania mas formierskich zawierających samodzielne spoiwa skrobiowe w postaci natywnej skrobi ziemniaczanej Superior Standard oraz komercyjnego produktu Albertine F/1.

The aim of the study was to determine the properties of the moulding sands with binders consist of starch. The efficiency of binding of the sand grains was determined based on the results of the determination of liquidity, permeability, abrasion resistance and flexural strength and tensile strength of the microwave-cured moulding sands. There was made a preliminary assessment of the merits of microwave curing prepared moulding with a binder in the form of a native potato starch as Superior Standard and commercial product as Albertine F/1.