This paper reports on the development of the amplifier for neurobiological experiments, for fast transition between the stimulation and recording phases. Schematic-level design and parameters are presented, as well as the implementation of three methods of stimulus artifact reduction. Finally, simulation results are shown for performance comparison of these methods.
PL
Artykuł opisuje projekt wzmacniacza do zastosowań w eksperymentach neurobiologicznych, gdzie szybkie przełączanie pomiędzy fazą stymulacji i fazą odczytu jest bardzo istotne. Zaprezentowany jest schemat układu, jego parametry, implementacja trzech metod redukcji artefaktów stymulacyjnych, oraz wyniki symulacji porównujących te metody.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
The article presents a project of an output stage of the system designed for electrical stimulation of neural cells. The construction proposed is based on an operational amplifier working in a configuration of adjustable current source and is dedicated to the multichannel integrated electronic system destined for neurobiological experiments. The system has been tested in the CMOS 180nm technology and is characterized by a wide range of changes in stimulation currents (3 current ranges: 2 μA, 10 μA, 200 μA), high output impedance (above 20 MΩ), as well as a wide range of an output voltage ± 1.45 V for a ± 1.65 V supply voltage). The stimulator can generate different current patterns thanks to RAM and stimulator control logic employed. The work presents results of the simulations that concern both the scope of adjustments of stimulation currents and their mismatches between stimulation channels. The exemplary current waveforms are also shown.
W artykule opisano budowę typowego kanału odczytowego wykorzystywanego do rejestracji sygnałów neurobiologicznych. Wskazano główne źródła szumów jakie występują w tego typu układach i zwrócono szczególną uwagę na metody ich minimalizowania. Prowadzona w artykule dyskusja bierze pod uwagę kluczowe parametry wpływające na odniesione do wejścia kanału odczytowego szumy, a mianowicie moc pobieraną przez kanał pomiarowy oraz zajmowaną powierzchnię krzemu. Uwzględnia przy tym typowy kanał odczytowy składający się z przedwzmacniacza napięciowego, układu próbkująco-pamiętającego i przetwornika analogowo-cyfrowego. Pobierana moc oraz zajętość powierzchni są niezmiernie istotne w odniesieniu do budowy wielokanałowego implantowanego układu scalonego przeznaczonego do rejestracji szerokiej gamy sygnałów neurobiologicznych. Artykuł zakończony jest opisem zrealizowanego układu scalonego, którego rozbudowana funkcjonalność pozwala na wykorzystanie go do rejestracji szerokiej gamy sygnałów neurobiologicznych.
EN
This paper presents the noise analysis of the main components of the typical recording channel dedicated to neurobiological experiments. Main noise contributors are emphasized and its noise minimization techniques are presented. Noise analysis considers the main recording channel parameters that may be crucial during multichannel recording system design. Authors also present the measurement results of the 8-channel integrated circuit dedicated to recording broad range of the neurobiological signals.
Praca zawiera opis projektu oraz rezultaty pomiarów 8-kanałowego układu scalonego przeznaczonego do rejestracji szerokiej gamy sygnałów neurobiologicznych. Układ został wykonany w submikronowej technologii CMOS 180nm. Pojedynczy kanał pomiarowy jest zasilany napięciem š0.9V, pobiera 11 žW mocy i zajmuje 0.06 mm2 powierzchni. Każdy z torów odczytowych jest wyposażony w cyfrowe rejestry konfiguracyjne pozwalające na niezależną kontrolę wzmocnienia napięciowego czy też dolnej i górnej częstotliwości granicznej. Dzięki tym rejestrom użytkownik ma możliwość ustawienia dolnej częstotliwości granicznej w zakresie 0.3 Hz - 900 Hz zaś górna częstotliwość graniczna może być ustawiona skokowo na wartość 280 Hz lub 9 kHz. Wzmocnienie napięciowe może być ustawione na wartość 260 V/V lub 1000 V/V. Wejściowe szumy napięciowe dla ustawionego pasma częstotliwościowego 1 Hz - 9 kHz wynoszą 5 žVRMS.
EN
This paper presents a low noise, low power electronic chip comprising 8-channels of neural recording amplifiers that occupy very small silicon area and are suitable to integrate with multielectrode arrays in cortical implants where power, area and low input referred noise are very severe restrictions. The author analyses the main problems existing in neural recording systems processed in modern submicron technologies and introduces methods allowing avoiding them. There are also presented the design and measurement results of this chip. Each recording channel is equipped with a control register that enables setting the main chip parameters independently in each recording site. Thanks to this functionality, a user is capable to set the lower cut-off frequency in the 0.3 Hz - 900 Hz range, the upper cut-off frequency can be switched either to 280 Hz or 9 kHz, while the voltage gain can be set either to 260 V/V or 1000 V/V. A single recording channel is supplied from š0.9V, consumes only 11 žW of power, and its input referred noise is equal to 5 žV for 1 Hz - 9 kHz bandwidth. The chip parameters presented in this paper make it a good candidate for using in modern multichannel pixel 3-D neurobiology applications.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.