Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: nanowłókna poliamidowe

Sortuj według:

Ogranicz wyniki do:

Insertion of Electrospun Nanofibres into the Inner Structure of Textiles

Ragaišienė A, Rukuižienė Ž, Mikučioniené D, Milašius R

Fibres & Textiles in Eastern Europe

2014

Vol. 22, no. 6 (108)

59—62

It is well known that a web formed by the electrospinning process can be easily damaged. The main idea of this work was to insert a web of nanofibres into the inner structure of a knitted fabric and in this way protect the web from mechanical damage. Our goal was to fix this nanofibrous web between the thread systems of the knit. This method should make inter relations of the web with the supporting material much stronger than simply covering the surface of the knit, and such material with nanofibres can be more widely used for healthcare textile. In this work yarns, nonwovens and knitted fabrics were covered by a layer of PA6 nanofibres using “Nanospider TM” equipment. It was found that nanofibres with the same diameter had been deposited on the nonwoven as well as on the cotton yarns, and the diameter of nanofibres on the knit was 30 % thicker. It is very important that the technological process of knitting does not damage the electrospun web deposited on the yarns, and that knitted fabric manufactured from covered yarns include nanofibrous components in the inner structure of the knit. What is more, during the knitting process, migration of fibres in the yarn occurs. This phenomenon is very well known in spinning and is a very positive aspect as the nanofibrous web on the yarns partly migrates into the inner structure of the yarns, which means that the nanofibrous web in some parts has been covered by the main fibres of the yarn. It was estimated that it is possible to insert a web of nanofibres into the inner structure of the knitted fabric and fix this web between the thread system as well as to partly insert it into the inner structure of the yarns.

Ogólnie wiadomo, że runo produkowane z nanowłókien za pomocą elektroprzędzenia może być łatwo uszkodzone. Głównym celem badań w pracy było wprowadzenie runa nanowłókien w wewnętrzne struktury dzianin i w ten sposób zabezpieczenie runa przed mechanicznymi uszkodzeniami. Dodatkowo naszym celem było zamocowanie nanowłókien pomiędzy nitkami dzianiny. Stwierdzono, że dobre skutki daje metoda nanoszenia runa z nanowlokien na przędzę bawełnianą, a następnie wykonanie z niej dzianiny. W ten sposób uzyskano znacznie lepsze wyniki niż pokrywając bezpośrednio dzianinę runem z nanowłókien.

Langmuir isotherm models applied to the sorption of acid dyes from effluent onto polyamide nanofibers

Wang Y., Wiener J., Zhu G.

Autex Research Journal

2013

Vol. 13, no. 3

95--98

The ability of polyamide 6 nanofibers membrane (P6NM) to remove acid dyes from effluent solution by adsorption has been studied. Equilibrium isotherms for the adsorption of three acid dyes, Acid blue 41 (AB41), Acid blue 78 (AB78), and Acid yellow 42 (AY42), on P6NM were measured experimentally. Simulated wastewater of acid dyes with the concentration of 10 mg/L for sorption process electrospun polyamide 6 with mass per unit area 12 g/m2 was used as the sorbent material. Ten sets of P6NM were dipped in separate simulated effluent. The weight of the original P6NM and the concentration of left solution were detected. Results were analyzed by the Langmuir equation using a linearized correlation coefficient. And it showed that all the dyes tested could follow the Langmuir adsorption isotherm, which gave excellent correlation for all the dyes.