Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  mordenite
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The potential of Georgian natural Mordenite has been studied as a low-cost, eco-friendly adsorbent for the removal of lead (II) ions from aqueous solutions in various experimental environments. The natural and modified Mordenite structural characterization was carried out using XRD, SEM-EDS, XRF, methods. The following parameters were studied for adsorption: dependence of solution pH, adsorbent dose, and initial concentration of lead (II) ions. The results of the optimization study showed that a high dose of adsorbent and a low concentration of Pb (II) ion increase the sorption. The optimum pH was found to be 6-8. Sorption capacity increased along with pH. Langmuir and Freundlich isotherms were used to model the adsorption data. Correlation coefficient values (R2) were 0.975 and 0.922, respectively. Isotherm studies showed that the uptake equilibrium is best described by the Langmuir adsorption isotherm. The maximum sorption capacity was found to be 11.439 mg/g. The research results showed that natural Georgian Mordenite can be used to remove Pb (II) ions from aqueous solutions.
EN
Authors present a short review of selected natural-origin zeolite materials. This article discusses the structure, classification and ability to modify natural zeolites, along with examples of their potential applications as adsorbents or catalysts.
PL
Autorzy przedstawili krótki przegląd wybranych materiałów zeolitowych pochodzenia naturalnego. W artykule omówiono strukturę, klasyfikację i możliwości modyfikacji naturalnych zeolitów, wraz z przykładami ich potencjalnych zastosowań jako adsorbentów lub katalizatorów.
EN
This article presents the results of research studies on the possibilities of application of natural zeolite-mordenite for the reduction of nitrogen oxide. Various kinds of metal ions were added to the zeolite samples using the ion-exchange method. The effect of metal contents was shown for the mordenite and related to their catalytic properties. The catalytic properties of Cu-, Co-, Ni- were compared for NO reduction with methane. High nitric oxide conversions were observed for copper and cobalt-mordenite, especially in the temperature range between 400 and 500 C degree. Copper- and cobaltmordenite catalysts showed higher activities and selectivities than catalysts composed of nickel-exchanged mordenite.
EN
The cesium and strontium were exchanged by faujasite type and natural clinoptilolite and synthetic mordenite zeolites from cesium and strontium nitrate aqueous solution. The contents of cesium and strontium removed by zeolites from CsNO3 and Sr(NO3)2 aqueous solutions were measured by Atomic Emission Spectroscopy Induced Coupled Plasma. The Fourier Transform Far Infrared Spectroscopy were applied to tentative determination of position of cations in framework structure of zeolites.
PL
Z wzorcowych roztworów wodnych azotanów cezu i strontu usuwano cez i stront za pomocą zeolitów CaA, NaX, klinoptilolitu i modernitu. Zeolity badane metodą proszkowej analizy rentgenograficznej miały wysoki stopień krystaliczności. Stwierdzono metodą Emisyjnej Spektometrii Atomowej, że największa ilość cezu usuwana z roztworów wodnych ich azotanów jest za pomocą sodowego zeolitu X, następnie zeolitów klinoptilolitu i modernitu, natomiast największa ilość strontu usuwana jest kolejno przez: sodowy zeolit X, wapniowy zeolit A, a następnie klimoptilolit i modernit. Na podstawie pomiarów w dalekiej podczerwieni wstępnie oznaczono pasma odpowiadające drganiom kationów wymiany oraz atomów w ieci krystalicznej zeolitów.
EN
The surface properties of the Ukrainian Transcarpathian mordenite from West Ukraine ( containing 90% of zeolite) have been investigated in terms of its applicability for. the isolation and co11cel1tration of trace amounts of Cu(II) and Cd(II) from water. The solid phase extraction has been carried out and the optimum conditions established. The infuence of several factors on the adsorption and desorptio11 of Cu(II) and Cd(II) ions have been studied. These factors were following: temperature of a preliminary treatment of mordenite, presence of foreign ions in the solution, rate of solution introducing into the column, temperature and pH of the solution, and type of eluent used for the desorption. From the data of low temperature adsorption and desorption isotherms of nitrogen, the parameters of structure of the starting natural mordenite were calculated. The properties of starting mordenite were investigated by means of differential thermal analysis and desorption of water from the starting adsorbent and from adsorbent modified by heating at a temperature of 150°C, was studied with quasi-isothemaI method. Such a modification method was selected as it results in optimum properties for the isolation and the isolation and concentration of trace amounts of Cu(II) and Cd(II). Under optimum deserption conditions the effective extraction of coppel. and cadmium was 99.8 al1d 94% respectively.
PL
Stosując metodę ekstrakcji do fazy stałej badano właściwości powierzchniowe zakarpackiego mordenitu z zachodniej Ukrainy (zawierającego (90% zeolitu) pod kątem jego przydatności do izolowania i zatężania śladowych ilości Cu(II) i Cd(II) zawartych w wodach metodą solid-phase-extraction. Ustalono optymalne warunki przeprowadzania takiego procesu. Zbadano wpływ następujących czynników na efektywność procesu adsorpcji i desorpcji jonów Cu(II) i Cd(II): temperatury wstępnej obróbki mordenitu, obecności w roztworze obcych jonów, szybkości podawania na kolumnę roztworów oraz ich temperatury i pH, rodzaju eluenta użytego do desorpcji Cu(II) i Cd(II). Z danych niskotemperaturowych izoterm adsorpcji-desorpcji azotu, obliczono parametry struktury porowatej wyjściowego mordenitu. Metodą różnicowej analizy termicznej badano właściwości wyjściowego mordenitu, zaś metodą quasi-isothermiczną- desorpcję wody z wyjściowego adsorbentu oraz wygrzewanego w temp. 150°C, w której osiągał opty-malne właściwości do izolowania i wzbogacania śladów Cu(II) i Cd(II). Przy zachowa-niu optymalnych warunków procesu desorpcji, efektywność ekstrakcji miedzi i kadmu wynosiła odpowiednio 99.8 i 94 %.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.