Wyniki wyszukiwania - BazTech

Ograniczanie wyników

1 Archives of Civil and Mechanical Engineering

1 2024

Znaleziono wyników: 1

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: low-temperature curing

Sortuj według:

Ogranicz wyniki do:

A green binder for cold weather applications: enhancing mechanical performance of alkali-activated slag through modulus, alkali dosage, and Portland cement substitution

Dener Murat, Altunhan Ufuk, Benli Ahmet

Archives of Civil and Mechanical Engineering

2024

Vol. 24, no. 3

art. no. e176, 2024

Below 5 °C, Portland cement (PC) experiences delayed hydration, slowing strength development, making it unsuitable for winter. Alkali-activated slag (AAS) emerges as a viable alternative with continuous hydration in low-temperature conditions. The effect of the activator nature on the performance of AAS cured at normal temperatures is well known, but further studies are required for low-temperature conditions. This study investigates the synergistic impact of activator modulus (1.2 and 1.5), alkali dosage (5, 7, and 9%), and PC substitution rates (0, 10, and 20%), on low-temperature cured AAS properties. Eighteen mixtures were prepared and cured at 2 °C. Compression and ultrasonic pulse velocity tests were conducted after 7, 28, and 90 days. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy analyses were performed to examine the microstructure of the samples. Elevating alkali dosage enhanced early age strength but resulted in a drop in 90-day strength. Simultaneous increases in modulus and PC substitution rate reduced strength due to shrinkage-induced crack formation. Optimal mixture design options included using 10% PC in the 1.2 modulus and omitting PC when the 1.5 modulus was selected. Despite low temperatures, the use of PC significantly accelerated the setting time. Altering modulus and alkali dosage caused a considerable change in the intensity of the peaks in the FTIR spectrum. The findings indicate that AAS shows promise when adjusting the mixture design for temperatures below 5 °C, which are unfavorable for the hydration of PC.