Wyniki wyszukiwania - BazTech

1

Numerical modelling of uniaxial compressive strength laboratory tests

Nguyen Phu Minh Vuong, Walentek Andrzej, Waclawik Petr, Souček Kamil, Antoniuk Michał

Journal of Sustainable Mining

|

2023

|

Vol. 22. iss. 4

280--294

EN

In the last decades, numerical modelling has been widely used to simulate rock mass behaviour in geo-engineering issues. The only disadvantage of numerical modelling is the reliability of required input data (e.g. mechanical parameters), which is not always fully provided due to the complexity of rock mass, project budget, available test methods or human errors. On the other hand, it was proven in many cases that numerical modelling is a helpful tool for solving such complex problems, especially when coupled with the results of laboratory and in-situ tests. This paper presents an attempt to determine the proper numerical constitutive model of rock and its mechanical parameters for further simulating rock mass response based on the outcomes of laboratory testing. For this purpose, the available constitutive models, including mechanical parameters, were taken into account. The simulation performance with the selected constitutive models is demonstrated by matching the numerical modelling results with the uniaxial compressive strength laboratory tests of rock samples from the Bogdanka coal mine. All numerical simulations were carried out using the finite difference method software FLAC3D.

2

Linking static and dynamic mechanical properties for metamorphic rocks from Austria including their anisotropic efect

Gegenhuber Nina, Krueger Melanie

Acta Geophysica

|

2021

|

Vol. 69, no. 2

539--546

EN

The derivation of geomechanical properties from petrophysical/geophysical data is not only of great importance in the oil industry but also in mining, geothermal projects and tunnelling, for reduction of costs and to improve security. For the oil industry and geothermal sector, it is mainly important for drilling rate and the stability of the borehole and, as a result, the economic factor. A key issue is that geomechanical properties, which can support a better planning of a project, cannot be measured in the borehole or on the surface directly. In this study, the focus is put on anisotropic efects on the correlation between static and dynamic properties, which is neglected in most studies but important because values can vary extremely. Therefore, measurements in the geotechnical laboratory of compressional and shear wave velocity during uniaxial compression strength test were taken. Additionally, typical properties like bulk and grain density as well as porosity were determined too. Diferent samples (carbonate–silica schist, marble and phyllite) from the "Zentrum am Berg"-research tunnelling centre at the "Erzberg" in Austria were used. Shown are correlations between uniaxial compression strength and compressional wave velocity as well as for static and dynamic Young’s modulus including their anisotropic efect. The results are promising and provide an opportunity for further applications on log data.

3

The effect of petrographic characteristics on the physical and mechanical properties of currently exploited Pińczów Limestones – a type of Leitha Limestone (Carpathian Foredeep, southern Poland)

Figarska-Warchoł Beata, Stańczak Grażyna

Gospodarka Surowcami Mineralnymi

|

2019

|

T. 35, z. 1

59--98

EN

The subject of the research was the Middle Miocene red algal limestone from the Włochy deposit, which is currently the only place of exploitation of the Pińczów Limestone representing a local type of the Leitha Limestone. The collected samples of this rock belong to the organodetric facies of diverse grain size and sorting of clastic material. Considering the proportions of characteristic skeleton remains, the composition of the coarse-grained organodetric facies is red algal-foraminiferalbryozoic, while of the fine-grained facies is foraminiferal-red algal. The cement of these rocks is predominantly sparite compared to micrite-clay matrix. A complement to petrographic studies was the chemical analysis and identification of mineral phases with X-ray diffraction. Moreover, physical and mechanical properties of samples were analyzed. Porosity of the rock was assessed in the polarizing and scanning microscope (SEM-EDS) observations, as well as with a porosimetric tests. The coarse-detrital limestone with a dominant binder in the form of intergranular cement is characterized by the apparent density sometimes exceeded 1.90 Mg/m3, while fine-grained limestone has the highest water absorbability (above 20%) and total porosity (about 40%). The above properties influenced high water absorption by capillarity, limiting the possibility of using limestone in places exposed to moisture. The observed relationship between the ultrasonic waves velocity and the uniaxial compressive strength gives the possibility of predicting the value of the latter parameter in the future. The limestones from Włochy deposit do not differ in quality from the previously used Pińczów Limestones, and their technical parameters predestine them for use as cladding material with insulating properties.

PL

Przedmiotem badań były środkowomioceńskie wapienie krasnorostowe ze złoża Włochy, jedynego obecnie miejsca eksploatacji wapieni pińczowskich, reprezentujących lokalny typ wapieni litawskich. Pobrane próbki tych skał reprezentują fację organodetrytyczną o zróżnicowanym uziarnieniu i wysortowaniu materiału okruchowego. Biorąc pod uwagę proporcje charakterystycznych szczątków szkieletowych, skład facji gruboziarnistej jest krasnorostowo-otwornicowo-mszywiołowy, zaś drobnoziarnistej – otwornicowo-krasnorostowy. Spoiwo tych skał stanowi cement sparytowy, przeważający nad matriks mikrytowo-ilastą. Uzupełnieniem obserwacji petrograficznych była analiza składu chemicznego i identyfikacja faz mineralnych przy pomocy dyfraktometrii rentgenowskiej (XRD). Ponadto wykonano badania właściwości fizycznych i mechanicznych. Porowatość skały oceniono na podstawie obserwacji w mikroskopie polaryzacyjnym i skaningowym (SEM-EDS) oraz w testach porozymetrycznych. Wapienie grubodetrytyczne z dominującym spoiwem w postaci cementu intergranularnego odznaczają się gęstością pozorną przekraczającą czasem 1,90 Mg/m3, podczas gdy drobnoziarniste mają najwyższą nasiąkliwość wagową (pow. 20%) i porowatość całkowitą (ok. 40%). Wpływa to na wysoką nasiąkliwość kapilarną, ograniczającą możliwości zastosowania wapienia w miejscach narażonych na zawilgocenia. Stwierdzona zależność pomiędzy prędkością fal ultradźwiękowych a wytrzymałością na ściskanie jednoosiowe daje możliwość prognozowania wartości tego ostatniego parametru w przyszłości. Wapienie ze złoża Włochy mają jakość podobną do innych wapieni pińczowskich eksploatowanych w przeszłości, a ich parametry techniczne predestynują je do zastosowania jako materiału okładzinowego o właściwościach izolacyjnych.