Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 8

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  hydraty gazowe
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Purpose: Determination of regularities of joint action of mechanical stresses, formation water and hydrate formation on corrosion of material of flow pipelines. Design/methodology/approach: According to the analysis of reservoir water of the investigated deposits, it was found that the main corrosive component is soluble chlorides. Proposed for corrosion and corrosion-mechanical tests of 6 model environments. An estimation of the influence of stress concentration, depending on the defects of the inner wall of the pipe, was carried out, and the nominal local stresses in the pipeline was carried. Findings: The basic regularities of influence of stress and hydration formation on corrosion and localization of corrosion processes and on the kinetics of deformation of samples are described. For samples made of steel 20 and 17GS, an increase in the velocity of general and local corrosion for samples sustained in the gas hydrate was observed compared to the control results obtained, the coefficient of influence of the gas hydrate on corrosion was calculated. Research limitations/implications: The obtained results are valid for thermobaric operating conditions of well flow lines. Practical implications: The data obtained in the work on the patterns of corrosion processes and the impact of hydrate formation on them will allow to identify potentially dangerous areas of flow lines and prevent emergencies. Originality/value: Based on the analysis of the geometric dimensions of the defects, the effective stress concentration coefficients are calculated, and it is shown that the stresses in the vicinity of corrosion defects in normal operating modes range from 164 to 545 MPa.
EN
Located in Southeast Asia, Vietnam has a diverse and complex geology. Seismic methods have solved many different geological tasks such as interpreting geological structure, petroleum and mineral exploration, research gas hydrate, etc. In this report, we present some achievements using Seismic methods for petroleum exploration to find not only structural traps but also stratigraphic traps in sedimentary basins, in non-traditional fractured granite basement reservoirs, and in the initial stage of gas -hydrate exploration. Seismic acquisition methods such as 3D / 4C have been applied effectively. Advanced seismic processing and interpretation methods have been used, such as applying seismic filters (T-P, Radon, SRMA…), seismic imaging (Pre-stack Migration/PSTM, Control Beam Migration/CBM), Seismic Inversion (SI), Amplitude Versus Offset Analysis (AVO), Seismic Sequence Stratigraphy, Seismic Attributies, Artificial Neural Network (ANN), etc. The results seismic interpretation, thereby which lead to enhansed effectiveness of oil and gas exploration programs.
PL
Położony w Azji Południowo-Wschodniej Wietnam ma różnorodną i złożoną geologię. Metodami sejsmicznymi rozwiązano wiele różnych zadań geologicznych, takich jak interpretacja struktury geologicznej, poszukiwania ropy naftowej i minerałów, hydratów gazu itp. W niniejszym artykule przedstawiono niektóre osiągnięcia w których wykorzystano metody sejsmiczne do poszukiwań ropy naftowej, w celu określenia zaburzeń strukturalnych, a także stratygraficznych w basenach osadowych, w nietradycyjnych zbiornikach granitowych oraz w początkowej fazie eksploracji gazu i hydratów. Skutecznie zastosowano metody akwizycji sejsmicznej 3D/4C. Zastosowano zaawansowane metody przetwarzania i interpretacji danych sejsmicznych, takie jak stosowanie filtrów sejsmicznych (TP, Radon, SRMA), obrazowanie sejsmiczne (Migracja / PSTM, Migracja wiązki kontrolnej / CBM), Inwersja sejsmiczna (SI), Amplituda kontra przesunięcie (AVO), stratygrafia sekwencji sejsmicznych, atrybuty sejsmiczne, sztuczna sieć neuronowa (ANN) itp. Wyniki interpretacji sejsmicznej pozwalają na osiągnięcie zwiększonej skuteczności programów poszukiwania ropy i gazu.
EN
Audio-magnetotelluric (AMT) method is a kind of frequencydomain sounding technique, which can be applied to gas hydrate prospecting and assessments in the permafrost region due to its high frequency band. Based on the geological conditions of gas hydrate reservoir in the Qilian Mountain permafrost, by establishing high-resistance abnormal model for gas hydrate and carrying out numerical simulation using finite element method (FEM) and nonlinear conjugate gradient (NLCG) method, this paper analyzed the application range of AMT method and the best acquisition parameters setting scheme. When porosity of gas hydrate reservoir is less than 5%, gas hydrate saturation is greater than 70%, occurrence scale is less than 50 m, or bury depth is greater than 500 m, AMT technique cannot identify and delineate the favorable gas hydrate reservoir. Survey line should be more than twice the length of probable occurrence scale, while tripling the length will make the best result. The number of stations should be no less than 6, and 11 stations are optimal. At the high frequency section (10~1000 Hz), there should be no less than 3 frequency points, 4 being the best number.
EN
In this paper, gas pipeline optimization includes constraints resulting from hydrate prevention. The key is to seek for the optimal settings of both: the compressor units and hydrate combating method at minimum fuel consumption subject to security of supply and hydrate prevention. A case study is conducted on the Polish section of the Yamal pipeline and an arbitrarily selected partial onshore and offshore pipeline. Three different configurations are investigated: (i) cooling the compressed gas, (ii) no cooling and (iii) line heating immediately after the compressor station. For each configuration, the fuel consumption of the compressors is minimized and in order to prevent hydrate formation, the outlet temperature of the line heater, allowable water vapour in the gas and methanol concentration are calculated for each pipe section. The hydrate model is based on the statistical mechanical approach of Van der Waals and Platteeuw and applicable for systems that contain water (free or dissolved in gas), methanol and mixed gases both hydrate and non-hydrate formers.
PL
W artykule omówiono zagadnienie optymalizacji gazowego systemu przesyłowego uwzględniając dodatkowo ograniczenia wynikające z warunków tworzenia się hydratów. Kryterium optymalizacji to minimum zużycia paliwa w tłoczniach gazu. Badania przeprowadzono na polskiej części gazociągu jamalskiego dla trzech przypadków pracy tłoczni: chłodzenie gazu w tłoczni, brak chłodzenia oraz podgrzewanie gazu za stacją przetłoczną. Dla każdego wariantu, zużycie paliwa przez sprężarki jest minimalizowane oraz w celu przeciwdziałania tworzenia się hydratów, temperatura wyjściowa podgrzewacza jest obliczana a także obliczana jest zawartość pary wodnej i metanolu w gazie dla każdej sekcji gazociągu. Zastosowany model hydratu jest oparty na modelu Van der Waalsa oraz Platteeuw.
EN
The paper put forward the idea of sampling for gas hydrates by hole bottom freezing, and the method is that the temperature of the gas hydrate core is decreased on the hole bottom by cold source, the result of decreasing the temperature is the same as increasing pressure to inhibit gas hydrate dissociating and retains the core of gas hydrates. Firstly, the feasibility of hole bottom freezing method for sampling gas hydrates is analysed by research the temperature-pressure property. Secondly, it is confirmed that the dry ice is used as coolant, the alcohol as positive freezing catalyst and cooling medium by the indoor freezing experiment. Finally, the freezing sample tool is developed, the freezing loess sample is achieved. The research supplies the news ideas for the design of gas hydrates core sampler.
PL
Zaprezentowano ideę opróbowania hydratów gazowych przy zastosowaniu zamrażania dna otworu. Polega ona na tym, że temperatura rdzeniowanego materiału jest obniżana w dnie otworu, co wywołuje podobny efekt jak wzrost ciśnienia, uniemożliwając dysocjację pobieranych próbek hydratów. Zaproponowano użycie suchego lodu jako czynnika chłodzącego oraz alkoholu jako katalizatora procesu zamrażania. Przedstawiono nowe możliwości projektowania rdzeniówek do poboru próbek hydratów.
6
Content available Odsiarczanie gazu ziemnego metodą hydratacji
PL
Podstawowe składniki kwaśnego gazu ziemnego: metan, dwutlenek węgla i siarkowodór, w obecności wody w odpowiednich warunkach ciśnienia i temperatury tworzą hydraty gazowe. Obecnie hydraty gazowe sa obiektem zainteresowań w wielu dziedzinach, w tym: w transporcie i magazynowaniu gazu ziemnego, w procesach chłodniczych i "magazynach zimna", w sekwestracji ditlenku węgla, w procesach rozdzielania i do innych zastosowań. Celem niniejszego artykułu jest literaturowy przegląd technologii, badań i podstawowych informacji koniecznych do opisu zjawiska hydratacji siarkowodoru w mieszaninie kwaśnych gazów ziemnych. Większość badań związana jest z problematyką ochrony środowiska i dotyczy zmniejszania ilości ditlenku węgla uwalnianego do atmosfery. W takim przypadku, procesy separacji składników oparte o metodę hydratacji gazów dotyczą jednocześnie obu kwaśnych składników gazu ziemnego (siarkowodoru i ditlenku węgla) i muszą być badane wspólnie i jednocześnie. Informacje o tych warunkach są również niezbędne dla przemysłu gazowniczego; do celów konstrukcyjnych i procesowych dla instalacji gazowniczej i rurociągów.
EN
Main components of the sour natural gas, such as methane, carbon dioxide and hydrogen sulfide form gas hydrates in presence of water and under suitable temperature and pressure conditions. Gas hydrates are now renewed interest in many fields, includes: natural gas storage and transportation, in refrigeration processes and cool storage, sequestration of carbon dioxide, separation processes and many others. The purpose of this paper is to briefly literature review of projects, research, and basic information needed for description of the hydrogen sulfide hydrate formation in sour natural gas mixtures. The most studies concern reducing the quantities of carbon dioxide released into the atmosphere, as a major environmental challenge. In this case, a separation processes dealing with hydrate formation both sour compounds (hydrogen sulfide and carbon dioxide) of natural gas mixture have to be treated commonly and simultaneously. Information on such conditions is also vital to the natural gas industry to design and operate processing equipment and pipelines.
7
Content available remote Hydraty
EN
A large amount of in situ hydrates may have an important link in utilisation of energy. Recently increase an interest of issues dealing with hydrates. In this paper brief review of the knowledge base for natural gas hydrates have been given. Among others a following questions were talked over: composition and molecular structure, condition and kinetics of formation, phase equilibria diagrams, experimental and calculation methods, some examples of calculation, occurrence and storage, hydrate as an energy source, ecological and exploitation hazard and hydrates prevention in the production and transportation gas system.
EN
General method of defining hydrate danger with nitrided natural gases transportation and processing. Conditions for hydrates appearance.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.