Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 2

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  hogging moment
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Continuous steel-concrete composite girder can fully utilize material strength and possess large spanning ability for bridge constructions. However, the weak cracking resistance at the negative bending moment region of the girder seriously harms its durability and serviceability. This paper investigates practical techniques to improve the cracking performance of continuous steel-concrete composite girders subjected to hogging moment. A real continuous girder was selected as the background bridge and introduced for numerical analysis. Modeling results show that under the serviceability limit state, the principle stress of concrete slabs near the middle piers of the bridge was far beyond the allowable material strength, producing a maximum tensile stress of 10.0 MPa. Approaches for strengthening concrete decks at the negative moment region were developed and the effectiveness of each approach was assessed by examing the tensile stress in the slabs. Results indicate that the temporary counterweight approach decreased the maximum tensile stress in concrete slabs by 22%. Due to concrete shrinkage and creep, more than 65% of the prestressed compressive stresses in concrete slabs were finally dispersed to the steel beams. A thin ultra-high performance concrete (UHPC) overlay at the hogging moment region effectively increased the cracking resistance of the slabs, and practical engineering results convicted the applicability of the UHPC technique.
EN
Demountable steel-concrete composite structures have attracted much attention from researchers because of its fast construction, demountability and environmental friendliness. Using ultra-high performance concrete (UHPC) in the hogging moment regions of demountable steel-concrete composite structures might improve their crack resistance and flexural performance. In this study, the cracking behavior, failure mode, stiffness, ultimate strength and relative slip of demountable steel-UHPC composite slabs with different stud spacings and longitudinal reinforcement ratios under hogging moment were experimentally investigated. A welded steel-UHPC composite slab was also tested to compare its behavior with the demountable slabs. The test results show the demountable steel-UHPC composite slabs have excellent crack control ability under hogging moment due to the slip of threaded headed stud and the strain hardening behavior of UHPC; the relative slip is directly associated with the stud spacing and controlled by the friction and shear force of threaded headed studs. As compared to the welded composite slab, the demountable composite slab can be easily separated after loading, the flexural capacity is slightly smaller, while the crack control ability is better and the ductility is higher. A constitutive model considering the reduction of tensile strength of UHPC after reinforcement was adoptedl the design formulas were developed to predict the elastic limit and the ultimate moment, and the bending stiffness of the demountable composite slabs under hogging moment. The test results verify the applicability of the proposed constitutive model of UHPC and design formulas.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.