Wyniki wyszukiwania - BazTech

1

Influence of the method of implementing the forced air flow through the cooling system on the temperature of the coolant in heavy-duty engines

Worsztynowicz B.

Combustion Engines

|

2017

|

R. 56, nr 4

51--55

EN

The article discusses the problem how forced air flow is implemented through the cooling module of heavy-duty engines. The kinematic connection between the coolant pump and the crankshaft of the engine, results in the fact that the pump performance often does not correspond to the engine demand at its part load. In conjunction with the fan drive method, the temperature of the coolant may be too low or too high for part load. The study was carried out in order to calculate the parameters of the cooling system in heavy-duty engines for maximum power and maximum torque, taking into account a mechanical fan drive, a hydraulic fan drive and an electric fan drive.

2

Numerical study on in-cylinder blending by means of a simultaneous direct injection of two liquid fuels in a heavy duty compression ignition engine

Kapusta Ł. J., Teodorczyk A.

Transactions of the Institute of Fluid-Flow Machinery

|

2015

|

nr 128

5--18

EN

Dual fuel combustion has been recently of high interest, mainly in terms of utilization of fuels different than diesel fuel in compression ignition engines. Depending on the properties of a fuel which is additional to diesel fuel, and the type of the additional fuel supply method the combustion process may be strongly modified comparing to single fuel combustion. Nowadays the modification of the combustion process becomes the reason for implementing the dual fuelling process. However, still the main reason for its implementation remains the utilization of nonconventional fuels in compression ignition engines. Among different types of dual fuel systems the one based on simultaneous direct injection of two fuels seems to be most flexible one. It allows to stratify the charge in the cylinder, blend two different fuels at any ratio and does not decrease volumetric efficiency. Therefore, this study aims at mixture formation in a heavy duty engine employing simultaneous direct injection of two different liquid fuels. Special attention was paid to spray breakup and simultaneous evaporation of two fuels which are the key processes in mixture formation.

3

Numerical simulations of dual fuel combustion in a heavy duty compression ignition engine

Kapusta Ł. J., Teodorczyk A.

Combustion Engines

|

2015

|

R. 54, nr 4

47--56

EN

In this study dual fuel direct injection was studied in terms of utilizing in compression ignition engines gaseous fuels with high octane number which are stored in liquid form, specifically liquid propane. Due to the fact that propane is not as much knock-resistant as natural gas, instead of conventional dual fuel system a system based on simultaneous direct injection of two fuel was selected as the most promissing one. Dual fuel operation was compared with pure diesel operation. The performed simulations showed huge potential of dual fuel system for burning light hydrocarbons in heavy duty compression ignition engines. However, further secondary fuel injection system optimization is required in order to improve atomization and lower the emissions.

PL

W niniejszej pracy przeanalizowano dwupaliwowy układ zasilania oparty na bezpośrednim wtrysku dwóch paliw w kontekście wykorzystania gazowych paliw o dużej liczbie oktanowej, mianowicie propanu, w silnikach o zapłonie samoczynnym. Z uwagi na to, iż propan nie jest tak odporny na spalanie stukowe jak metan, zamiast konwencjonalnego układu dwupaliwowego łączącego wtrysk bezpośredni i pośredni zdecydowano się na zastosowanie koncepcji zasilania opartej na bezpośrednim wtrysku dwóch paliw. Praca silnika w trybie dwupaliwowym została porównana z pracą silnika wyłącznie na oleju napędowym. Przeprowadzone symulacje pokazały duży potencjał układów dwupaliwowych w kontekście wykorzystania lekkich węglowodorów w silnikach o zapłonie samoczynnym dużej mocy. Jednak, dalsza optymalizacja układu paliwowego jest niezbędna, aby poprawić proces rozpylenia paliwa i obniżyć emisję.