Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 97

Liczba wyników na stronie
first rewind previous Strona / 5 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  heat consumption
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 5 next fast forward last
PL
Trend do zmniejszenia energochłonności budynków jest ze wszech miar korzystny. Budowane współcześnie budynki spełniają wymogi niskiego zużycia ciepła i energii do ogrzewania, ale można jeszcze znaleźć istniejące obiekty, w których wskaźnik zużycia energii końcowej i pierwotnej do ogrzewania wykracza daleko poza granice współczesnych standardów oszczędności energii. Są to np. szkoły w małych miejscowościach, budowane w latach 1950-1970, zakłady produkcyjne, nieliczne już obecnie budynki mieszkalne. Celem artykułu jest zwrócenie uwagi na dwa aspekty termomodernizacji: metodyki obliczenia zapotrzebowania na ciepło do ogrzewania i na aspekt opłacalności ekonomicznej przedsięwzięcia termomodernizacyjnego.
EN
The trend to reduce energy consumption by buildings is positive by all means. Buildings constructed today meet the requirements of low energy consumption, but you can still find existing buildings with the primary and final energy consumption indicator lying far beyond the contemporary limits. These are, for example, school in small towns, built in the 1950s-70s, industrial plants and few residential buildings. The aim of the article is to draw attention to two aspects of thermal modernization: the methodology of calculating of heat demand and the aspect of economic profitability of the thermal modernization project.
PL
Artykuł omawia problematykę dotyczącą poprawy efektywności energetycznej systemów zaopatrzenia w ciepło. Zwrócono uwagę na konieczność podejmowania działań nie tylko w przypadku dużych obiektów i systemów, ale również pojedynczych budynków i kotłowni lokalnych. Monitoring pracy systemu zaopatrzenia w ciepło pozwala na diagnozowanie najsłabszych jego elementów i podejmowanie decyzji prowadzących do poprawy efektywności energetycznej. W przypadku kotłowni, w której prowadzono badania, wyniki takiego monitoringu przekonały do wyposażenia jej w dodatkowy układ automatycznej regulacji z algorytmem mającym na celu ograniczenie liczby cykli włączeń i wyłączeń palników. Ograniczenie liczby załączeń palników, podobnie jak w przypadku innych urządzeń spalinowych i elektrycznych, ma istotny wpływ na sprawność energetyczną całego układu. Dodatkowo zwiększa również trwałość urządzeń, a tym samym zmniejsza koszty serwisu i napraw. Najprostsze algorytmy sterowania, często stosowane w regulatorach instalowanych w jednostkach kotłowych, nie zapewniają jednak optymalizacji w tym zakresie. Zastosowane urządzenie zewnętrzne pozwoliło ograniczyć liczbę cyklów włączeń i wyłączeń palników przy zachowaniu jakości dostawy ciepła do instalacji ogrzewania i układu przygotowania c.w.u. W materiale zarekomendowano również inne sposoby poprawy efektywności energetycznej systemu zaopatrzenia w ciepło istniejących budynków wielorodzinnych.
EN
The article discusses issues related to improving the energy efficiency of heat supply systems. It draws attention to the need to take action not only for large objects and systems, but also for individual buildings and their boiler plants. Heat supply system monitoring allows for the diagnosis of the weakest elements and making decisions leading to the improvement of energy efficiency. In the case of the boiler room where the research was carried out, the results of such monitoring convinced to equip boilers with an additional automatic control system, with an algorithm limiting the number of burner switching cycles and shutdowns. Limiting the number of switching on the burners, as in the case of other combustion and electric devices, has a significant impact on the energy efficiency of the entire system. In addition, it also increases the durability of the devices, and thus reduces costs of servicing and repairs. The simplest control algorithms, often used in controllers installed in the boiler units, do not provide optimization in this respect. The external device used has allowed the number of burners on and off cycles to be limited while maintaining the quality of the heat supply to the heating installation and the heat treatment system.The material also presents other ways to improve the energy efficiency of the heat supply system in existing multi-family buildings.
PL
W artykule przedstawiono obecny stan implementacji Dyrektywy Parlamentu Europejskiego w sprawie efektywności energetycznej z 2012 roku, w zakresie rozliczania kosztów ogrzewania w budynkach wielolokalowych, do przepisów prawnych poszczególnych państw członkowskich Unii Europejskiej. Zdefiniowano warunki techniczne poprawnego i zgodnego z zasadami współżycia społecznego podziału kosztów ciepła dostarczonego do budynku na poszczególne lokale. Podano kryteria wyboru budynków do analizy zależności wskazań podzielników służących do naliczania indywidualnych opłat od rzeczywistego zużycia ciepła na ogrzewanie. Dokonano wyboru budynków według podanych kryteriów oraz wyznaczono współczynniki korelacji i determinacji wspomnianych zależności dla budynków w pełni opomiarowanych oraz nie mających podzielników na grzejnikach łazienkowych. Na podstawie bogatego materiału statystycznego oceniono jakość podziału kosztów ogrzewania w zakresie spełnienia oczekiwań użytkowników dotyczących sprawiedliwych rozliczeń.
EN
The article presents the current state of implementation of the European Parliament Directive on energy efficiency from 2012, in the scope of settlement of heating costs in multidepartmental buildings, to the legal regulations of individual European Union Member States. Technical conditions have been defined for the correct and consistent with the rules of social coexistence of the division of heat costs delivered to the building for particular premises. The criteria for the selection of buildings for the analysis of dependence of allocators’ indications used for calculating individual charges on the actual consumption of heat for heating are given. The buildings were selected according to the given criteria and the coefficients of correlation and determination of the mentioned relationships were determined for fully measured buildings and not having dividers on bathroom radiators. On the basis of the rich statistical material, the quality of the division of heating costs in terms of meeting the expectations of users regarding fair settlements was assessed.
5
Content available Sposób ograniczenia strat cieplnych bypassa
PL
Wraz z rozwojem nowych, suchych metod wypalania klinkieru w piecach z wielostopniowymi podgrzewaczami surowca, pojawiły się nowe problemy technologicznie związane z tworzeniem się narostów w wymiennikach ciepła. Narosty te powstają w wyniku obiegu składników lotnych: alkaliów, siarki i chloru. Istotnym źródłem składników lotnych (oprócz surowca i pyłu węglowego) są paliwa alternatywne. Obserwowany w ostatnich latach intensywny wzrost udziału paliw alternatywnych w procesie wypalania klinkieru spowodował konieczność ograniczenia obiegu składników lotnych w instalacji piecowej poprzez zastosowanie bypassa, polegającego na wyprowadzeniu w zależności od zawartości składników lotnych 3–20% części gazów poza piec, z pominięciem wymiennika ciepła. Każdy procent bocznikowanych gazów powoduje wzrost zużycia ciepła w procesie wypalania o ok. 20–25 kJ/kgkl. W związku z tym dąży się do ograniczenia wielkości bypassa. Efekty ekologiczne i ekonomiczne z wykorzystania paliw alternatywnych powodują, że udział tych paliw stale rośnie, co skutkuje wzrostem obiegu składników lotnych i tym samym istnieje konieczność zwiększenia wielkości bocznikowanych gazów. W artykule przedstawiono jeden ze sposobów ograniczenia strat cieplnych w procesie wypalania klinkieru wynikających z zastosowania bypassa, polegający na wykorzystaniu entalpii gazów bypassowych do produkcji energii elektrycznej.
EN
The development of new, dry methods of clinker production in furnaces with multistage raw material heaters has resulted in new technological problems related to accretions building up in the heat exchangers. Such accretions form because of the circulation of volatile components: alkali, sulphur and chlorine. Beside raw material and coal dust, a lot of volatile components come from alternative fuels. Recent years have seen a significant increase in the use of alternative fuels in the clinker burning process, which made it necessary to restrict the circulation of volatile components in the furnace system with a bypass, which depending on volatile component volume lets 3–20% of gases out of the furnace, bypassing the heat exchanger. Each percent of bypassed gases increases heat consumption in the burning process by approx. 20–25 kJ/kg clinker. As a result, the tendency is to limit the size of the bypass. Ecological and economic effects of using alternative fuels makes their production usage grow constantly. This, in turn, results in increased volatile component circulation and the ensuing need to increase the volume of bypassed gases. The article presents one of the ways to reduce thermal losses resulting from operation of a bypass system, involving the use of enthalpy of bypass gases to produce electricity.
PL
W artykule opisano sposób wyznaczania liczby wymian powietrza wentylacyjnego z wykorzystaniem oryginalnej metody kilkukrotnego krótkiego pomiaru zużycia ciepła w istniejącym budynku mieszkalnym z wentylacją naturalną.
EN
The article presents the definement of ventilation air exchange rate by using an original method of multiple short measurement of heat consumption in existing residential building with natural ventilation.
PL
W pracy przedstawiono porównanie analitycznych metod szacowania zużycia energii z zużyciem na różne potrzeby. Analizy przeprowadzono dla budynku wielorodzinnego, czterokondygnacyjnego zlokalizowanego w Poznaniu. Obliczenia teoretyczne zweryfikowano poprzez pomiary zużycia ciepła, wody i energii elektrycznej w poszczególnych mieszkaniach. Zwrócono szczególną uwagę na wpływ sposobu użytkowania budynku przez mieszkańców.
EN
The paper presents a comparison of analytical methods for estimating the finale energy consumption for different needs. Analyses were performed for multi-family building, four-storey located in Poznań. Theoretical calculations were verified by measurements of consumption of heat, water and electricity by each apartment. Special attention was paid to the impact of usage of the building depends on the habits of the inhabitants.
PL
W artykule omówiono model, przyjęte założenia oraz wyniki symulacji rocznego zużycia ciepła i kosztów ogrzewania budynku użytkowanego w sposób okresowy. Do analizy przyjęto model budynku Wydziału Inżynierii Środowiska Politechniki Warszawskiej, zbudowany z wykorzystaniem pakietu symulacyjnego TRNSYS 17. Wyniki symulacji wykazały, że niezależnie od akumulacyjności budynku, obniżanie temperatury wewnętrznej w okresie nieużytkowania zawsze powoduje zmniejszenie zużycia ciepła i zwiększenie wymaganej mocy zamówionej. Natomiast wartość obniżenia temperatury wewnętrznej, zapewniająca najmniejsze koszty ogrzewania zależy od wielu czynników: akumulacyjności budynku, struktury cen ciepła oraz czasu trwania przerwy w użytkowaniu. Dla budynku masywnego obniżenie temperatury wewnętrznej jest niewielkie (dla analizowanego budynku jest to 0-3K, zależnie od struktury cen i okresu na jaki jest zamówiona moc), natomiast dla budynku lekkiego obniżenie jest duże i w zasadzie ogranicza je zjawisko wykraplania wilgoci na powierzchni przegród.
EN
The article discusses a model, adopted assumptions and simulation of the annual heat consumption, including heating costs of the building that has been operated periodically. The building model that has been assumed for the analysis is Environmental Engineering Department of Warsaw University of Technology. The model was built by using the TRNSYS 17 simulation package. The simulation results have showed that regardless of the storage capacity of the building, the reduction of internal temperature in the period of non-use always entails reducing the heat consumption and increasing the required power ordered. However, the value of internal temperature decrease that provides the lowest cost of heating depends on many factors: thermal capacity of the building, variability of heat prices and duration of intermissions. The reduction of internal temperature in a massive building is small (for analysed building it is 0-3 K, depending on the price variability and the period for ordered power), while for light buildings the reduction is large and in fact is only limited by the phenomena of moisture condensation on the surface of the partitions.
EN
The improvement of effectiveness of work furnaces depends on increasing the efficiency as well as the decrease the elementary consumption of energy. The character of the analyzed electric chamber furnace to thermal processing in work was introduced. over the discussed results concern the efficiencies, consumption of electric energy as well as the coefficient of elementary consumption of energy. The improvement of coefficients of furnace solutions were proposed.
EN
The paper presents results of calculations conducted on a change of demand for thermal power in a greenhouse covered with standard garden glass and a low-emission glass. Changes of heat demand were also determined. Changes of the amount of fuel (fine coal size grade) as well as changes in the emission of pollutants to the atmosphere were estimated based on calculations. It was determined that covering a greenhouse with low-emission glass has a positive impact on decreasing heat demand.
EN
This paper presents the selected results of examinations connected with a seasonal heat consumption (Q) and thermal power (q) for heating in educational buildings. The purpose of the analysis presented here was to examine the influence of possible occurrence and level of differences between the seasonal heat consumption (Q) and the seasonal heat demand (Qq) for heating, calculated on the basis of q values. A modification in the method for determination of Qq for room heating on the basis of available data on q was introduced. A linear function, describing the changes in (Qq – Q) depending on the changes in q values, which was applied for that purpose, made it possible to improve the consistency of obtained heat demand values in relation to measured consumption of heat for heating by 65.6%.
PL
W artykule przedstawiono wybrane wyniki analiz związanych z sezonowym zapotrzebowaniem na ciepło (Q) i mocą szczytową (q) do ogrzewania budynków edukacyjnych. Celem tej analizy było ustalenie wystąpienia różnic pomiędzy sezonowym zużyciem ciepła (Q) a sezonowym zapotrzebowaniem na ciepło (Qq) do ogrzewania, obliczonym na podstawie znanej wartości szczytowej mocy cieplnej q. Realizacja ww. analizy stanowiła podstawę do zaproponowania zmiany w metodzie obliczania wartości zapotrzebowania na ciepło Qq do ogrzewania pomieszczeń na podstawie dostępnych danych. Wykorzystanie tutaj funkcji liniowej opisującej zmiany (Qq – Q) w zależności od zmian wartości q umożliwia zmniejszenie rozbieżności pomiędzy obliczonymi wartościami zapotrzebowania na ciepło a zmierzonym zużyciem ciepła do ogrzewania o 65,6%.
PL
W artykule przedstawiono wymagania z zakresu ochrony cieplnej budynków według nowych warunków technicznych budowlanych wprowadzonych Dziennikiem Ustaw z dnia 5 lipca 2013 roku. Wyznaczono minimalne grubości izolacji termicznej niezbędne do osiągnięcia właściwych wartości współczynnika przenikania ciepła. Dokonano analizy grubości izolacji termicznej przegród wzniesionych z różnych materiałów w aspekcie zmieniających się wymagań.
EN
The article presents the requirements for the thermal protection of buildings according to the new technical conditions introduced by the Journal of Laws of 5 July 2013. There was set minimum insulation thickness necessary to achieve the right amount of heat transfer coefficient. The analysis of the thickness of the thermal insulation of partitions built of various materials in terms of changing requirements was conducted.
14
Content available remote Alternatywa dla wyznaczania obliczeniowej charakterystyki energetycznej budynków
PL
Obliczenie sezonowego zużycia ciepła na cele ogrzewania i wentylacji w budynku jest pierwszym etapem wyznaczenia jego charakterystyki energetycznej. W artykule przedstawiono możliwość zastosowania jednej z metod pomiarowego wyznaczania zużycia ciepła do ogrzewania i wentylacji w sezonie standardowym: metody sygnatury energetycznej opartej na regresji liniowej. Obliczenia przeprowadzono dla zamieszkałego budynku wielorodzinnego, dla wyników pomiarów in situ w rzeczywistym sezonie grzewczym, a także dla danych uzyskanych z symulacji procesu ogrzewania budynku. W celu wyboru najkrótszego możliwego okresu pomiarowego, analizowano jak zmienia się niepewność wyznaczania sezonowego zużycia ciepła na podstawie wyników z krótkich okresów (miesięcznego, dwutygodniowego oraz tygodniowego). Wykazano, że najkrótszym okresem pomiarowym dla zastosowania wybranej metody jest okres miesięczny. Ponadto wykazano możliwość zastosowania obliczeń symulacyjnych dla wielowariantowych analiz określania niepewności wyznaczania charakterystyki energetycznej metodami pomiarowymi.
EN
Calculation of the seasonal heat consumption for heating and ventilation purposes in the building is the first step in determination of the energy performance. The paper presents the possibility of using one of the methods for determining the heat consumption based on measurements – the energy signature method using linear regression. Calculations were performed for inhabited multifamily building for in situ measurements in real-heating season, as well as for data obtained from the simulation of the process of heating this building. In order to select the shortest possible measurement period there were analyzed the changes of seasonal heat consumption uncertainty determined on the basis of the results of the short periods (month, two weeks and one week). It has been shown that the period of one month is the shortest measurement period which is possible to the application using ES method. Moreover the calculations have shown the possibility of using simulation to determine the multivariate analysis of uncertainty in determination of the energy performance using measurement methods.
PL
W artykule dokonano analizy warunków klimatycznych miasta Częstochowy w celu określenia teoretycznego potencjału energetycznego promieniowania słonecznego. Przeanalizowano również możliwość pokrycia tym rodzajem energii całkowitego zapotrzebowania na energię obiektu referencyjnego. Ponadto rozważono różne warianty produkcji ciepła z energii promieniowania słonecznego. Posłużono się przy tym teoretycznym potencjałem promieniowania słonecznego, jak również analizą wykorzystującą urządzenia o średniej sprawności oferowane na rynku. We wnioskach poruszono również problem akumulacji lub oddawania nadwyżek energii.
EN
The article contains an analysis of the climatic conditions for the city of Częstochowa made in the order to determine the theoretical energy potential of solar radiation. Also analyzed the possibility of covering the total energy requirements of the reference object by that kind of energy. In this area were considered the different options of heat productions from the sun. In the consideration was used the theoretical potential of solar radiation, as well as analysis by use the device of the average market efficiency. The conclusions also discussed the problem of accumulation or donation of passing the energy.
PL
W artykule dokonano analizy warunków klimatycznych miasta Częstochowy w celu określenia teoretycznego potencjału energetycznego promieniowania słonecznego. Przeanalizowano również możliwość pokrycia tym rodzajem energii całkowitego zapotrzebowania na energię obiektu referencyjnego. Ponadto rozważono różne warianty produkcji ciepła z energii promieniowania słonecznego. Posłużono się przy tym teoretycznym potencjałem promieniowania słonecznego, jak również analizą wykorzystującą urządzenia o średniej sprawności oferowane na rynku. We wnioskach poruszono również problem akumulacji lub oddawania nadwyżek energii.
EN
The article contains an analysis of the climatic conditions for the city of Częstochowa made in the order to determine the theoretical energy potential of solar radiation. Also analyzed the possibility of covering the total energy requirements of the reference object by that kind of energy. In this area were considered the different options of heat productions from the sun. In the consideration was used the theoretical potential of solar radiation, as well as analysis by use the device of the average market efficiency. The conclusions also discussed the problem of accumulation or donation of passing the energy.
PL
W artykule dokonano analizy warunków klimatycznych miasta Częstochowy w celu określenia teoretycznego potencjału energetycznego promieniowania słonecznego. Przeanalizowano również możliwość pokrycia tym rodzajem energii całkowitego zapotrzebowania na energię obiektu referencyjnego. Ponadto, rozważono różne warianty produkcji ciepła z energii promieniowania słonecznego. Posłużono się przy tym teoretycznym potencjałem promieniowania słonecznego, jak również analizą wykorzystującą urządzenia o średniej sprawności oferowane na rynku. We wnioskach poruszono również problem akumulacji lub oddawania nadwyżek energii.
EN
The article contains an analysis of the climatic conditions for the city of Częstochowa made in the order to determine the theoretical energy potential of solar radiation. Also analyzed the possibility of covering the total energy requirements of the reference object by that kind of energy. In this area were considered the different options of heat productions from the sun. In the consideration was used the theoretical potential of solar radiation, as well as analysis by use the device of the average market efficiency. The conclusions also discussed the problem of accumulation or donation of passing the energy.
PL
Omówiono problematykę zużycia ciepła w obiektach edukacyjnych, przy czym obiektem była grupa 50 budynków edukacyjnych zlokalizowanych na terenie Częstochowy. Badania podzielono na dwa etapy. W artykule przedstawiono wyniki I etapu badań, w którym przeprowadzono analizę energetyczną kilku grup budynków szkolnych. Następnie, wybrano budynek reprezentatywny każdej grupy, w których określono teoretyczne wartości mocy cieplnej oraz zapotrzebowanie na ciepło. Celem badań było stworzenie narzędzia do oceny dużej grupy obiektów o zbliżonych cechach architektoniczno – funkcjonalnych.
EN
In this work the problem of heat consumption in educational facilities. The study was In this work the problem of heat consumption in educational facilities. The study was conducted on a group of 50 educational buildings located in the city of Czestochowa. The study was divided into two stages. This paper presents the first stage of the study. In the first stage of the study subjects were analyzed energy school buildings, which were divided into several groups. Then, for each group of selected building representative for whom the theoretical values of thermal power and heat demand. The aim of this study was to provide a tool for the evaluation of a large group of objects with similar characteristics architectural – functional.
PL
W artykule przedstawiono analizę przebiegu zmiany zużycia i zapotrzebowania na ciepło w zależności od badanych parametrów techniczno - budowlanych grupy 50. budynków edukacyjnych zlokalizowanych na terenie Częstochowy. Celem badań było określenie charakterystycznych czynników oddziałujących na rozbieżności pomiędzy zapotrzebowaniem na ciepło a jego zużyciem dla wybranej populacji budynków edukacyjnych. Opracowanie takich zależności umożliwiło stworzenie podstawy do opracowania wskaźników korygujących teoretyczne zapotrzebowanie na ciepło badanej grupy budynków szkolnych.
EN
The article presents an analysis of the variation of the heat consumption and demand depending on the examined technical and constructional parameters of a group of 50 education buildings located in the area of the City of Częstochowa. The purpose of the study was to determine the characteristic factors having an effect on the discrepancies between the heat demand and the heat consumption for a selected population of education buildings. The derivation of such relationships helped to create a basis for developing indicators to correct the theoretical heat demand for the population of school buildings under study.
PL
Artykuł opisuje prace nad stworzeniem systemu, który na podstawie danych historycznych ma analizować aktualne zużycia ciepła energii cieplnej dla odbiorców oraz prognozować zużycie ciepła na następny rok.
EN
The article describes the work on creating a system that is based on historical data to analyze current heat consumption of heat energy for customers predict the heat consumption for the next year.
first rewind previous Strona / 5 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.