Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 223

Liczba wyników na stronie
first rewind previous Strona / 12 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  generacja rozproszona
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 12 next fast forward last
PL
Obok wielu innych czynników coraz większe nasycenie generacji rozproszonej DG (GR – decentralized generation) rodzi konieczność optymalnego dostosowania i projektowania sieci dystrybucyjnych, aby zapewnić właściwy i kosztowo efektywny rozwój sieci w perspektywie ich przyszłej rozbudowy. W niniejszym artykule przeanalizowano efekty podwyższenia poziomu napięcia znamionowego w sieci dystrybucyjnej w celu zwiększenia ich zdolności przyłączeniowej i poprawy parametrów pracy sieci przy jednoczesnym zmniejszeniu strat sieciowych.
EN
The increasing penetration of Decentralized Generation (DG) among other factors rises the essential need to adapt and plan the distribution systems in an optimal way to achieve an appropriate cost-efficient development of networks to be prepared for the future grid development. This paper analyzes the impact to using higher nominal voltage levels in distribution networks to improve the hosting capacity of the network, its performance, and at the same time reducing network losses.
PL
W artykule zaprezentowano wybrane wyniki wieloletnich badań prosumenckich mikroinstalacji fotowoltaicznych dołączonych do sieci nn lokalnego OSD na terenie województwa kujawsko-pomorskiego. Badania nakierowane są na poznanie stanów pracy i najważniejszych wskaźników charakteryzujących mikroinstalacje oraz identyfikację czynników, które w sposób istotny wpływają na efektywność użytkowanych mikroinstalacji. Oddzielnym zagadnieniem jest rozpoznanie rodzajów awarii oraz częstotliwość ich występowania w okresie wieloletniej eksploatacji mikroinstalacji.
EN
The article presents selected results of many years of prosumer research on photovoltaic micro-installations connected to the local DSO LV network in the Kuyavian-Pomeranian Voivodeship. The research is aimed at understanding the operating conditions and the most important indicators characterizing micro-installations and identifying factors that significantly affect the efficiency of micro-installations in use. A separate issue is the recognition of types of failures and the frequency of their occurrence during the long-term operation of micro-installations.
PL
Artykuł przedstawia wybrane problemy związane z pracą sieci dystrybucyjnych przy dużym nasyceniu instalacjami generacji rozproszonej. Identyfikując problemy napięciowe w sieciach SN oraz przeciążeniowe w sieciach 110 kV wskazano sposoby ich rozwiązania uwzgledniające możliwości współczesnych systemów zbierania i przetwarzania danych pomiarowych opisujących stan sieci oraz ich wykorzystanie przez układy automatyki regulacyjnej i systemowej.
EN
The article presents selected problems related to the operation of distribution networks with high saturation with distributed generation. By identifying voltage problems in MV networks and overload problems in 110 kV networks, ways of solving them were indicated, taking into account the capabilities of modern systems for collecting and processing measurement data describing the state of the network and their use by control and protection systems.
PL
W artykule opisano problemy detekcji nieintencjonalnej, niekontrolowanej pracy wyspowej jednostek wytwórczych w sieciach średniego napięcia. Analizie poddano pracę i sposoby nastawiania kryterium zabezpieczeniowego ROCOF, które może być wykorzystane w detekcji pracy wyspowej jednostek wytwórczych. Ponadto przedstawiono cechy charakterystyczne tego kryterium oraz trudności techniczne występujące w czasie jego eksploatacji. Opisano także badania wpływu poszczególnych nastaw tych kryteriów na poprawność i dokładność detekcji pracy wyspowej i przypadki nadmiarowego działania zabezpieczeń opartych na tym kryterium.
EN
The article describes the problems of detecting unintentional, uncontrolled island operation of generating units in medium voltage grids. The operation and setting of the ROCOF criterion, which can be used in detecting the island operation of generating units, were analyzed. In addition, the features of this criterion and the technical difficulties that occur during its operation are presented. The study of the impact of the setting of this criterion on the correctness and accuracy of island detection is described. Moreover, the cases of misoperations of this criterion are also presented.
PL
W artykule przedstawiono wybrane wymagania techniczne stawiane rozproszonym jednostkom wytwórczym przez standard IEEE-1547. Skupiono się na kwestiach związanych z regulacją napięcia, mocy biernej i częstotliwości. Opisano także wymagania dotyczące odpowiedzi generacji rozproszonej w przypadku wystąpienia zakłóceń mających wpływ na stabilność i niezawodność pracy systemu elektroenergetycznego. W ramach artykułu podkreślono również podobieństwa i różnice pomiędzy standardem IEEE-1547 a odpowiadającymi mu dokumentami europejskimi.
EN
The article presents selected technical requirements imposed on distributed generation units by the IEEE-1547 standard. The authors focused on issues related to voltage, reactive power, and frequency regulation. The requirements for the response of distributed generation during disturbances affecting the stability and reliability of the power system are also described. Moreover, the article highlights the similarities and differences between the IEEE-1547 standard and the corresponding European documents.
PL
W artykule poruszono kwestie wpływu transformacji energetycznej, w tym elektryfikacji ciepłownictwa jednorodzinnego, rosnącej liczby instalacji fotowoltaicznych i zmiany profilu zapotrzebowania energetycznego na pogorszenie parametrów jakościowych sieci zasilającej niskiego napięcia oraz sposobów ich poprawy z wykorzystaniem transformatorów symetryzujących instalowanych w głębi sieci nn. W pierwszej części artykułu przedstawiono analizę danych statystycznych dotyczących struktury i długości obwodów niskich napięć w Polsce oraz normatywnych parametrów jakości napięcia zasilającego wraz z czynnikami wpływającymi na ich pogorszenie w kontekście aktualnych trendów związanych z szerokim stosowaniem powietrznych pomp ciepła i generacji rozproszonej. W kolejnych częściach przedstawiona została analiza wybranej instalacji transformatora symetryzującego w sieci nn z instalacjami PV oraz niesymetrycznymi obciążeniami. Zawarte w artykule wyniki pomiarów potwierdzają wysoką skuteczność transformatora symetryzującego w redukcji asymetrii napięć i prądów w głębi sieci oraz wskazują dodatkowe korzyści wynikające ze stabilizacji sieci niskiego napięcia.
EN
The article describe the impact of the energy transformation including the electrification of single-family houses heating, the growing number of photovoltaic installations and changes in the consumer energy demand profile on the power quality parameters deterioration in the low-voltage network and the improvement methods using load balancing transformers installed deep inside the LV network. The first part of the article presents an analysis of statistical data on the structure and length of low-voltage networks in Poland and normative parameters of the power quality and factors affecting their deterioration in the context of current trends related to the widespread use of air source heat pumps and distributed generation. The following sections present an analysis of a selected load balancing transformer installation in LV networks with PV installations and unbalanced loads. The measurement results confirm the high efficiency of the balancing transformer in current and voltage asymmetry reduction inside the network and show additional benefits of the low-voltage network stabilization.
PL
W artykule opisano problemy towarzyszące wydzieleniu się nieintencjonalnej, niekontrolowanej wyspy. Przedstawiono różnego rodzaju kryteria, które mogą być wykorzystane w detekcji pracy wyspowej jednostek wytwórczych. Ponadto przedstawiono cechy charakterystyczne poszczególnych kryteriów, a także trudności występujące w ich eksploatacji. Dodatkowo szczegółowo opisano badania, jakim poddano przekaźnik zabezpieczeniowy wyposażony w kryterium Voltage Vector Shift. Wykazały one negatywny wpływ zjawisk zewnętrznych występujących w systemie elektroenergetycznym, tj.: zwarć jednofazowych i trójfazowych o różnych rezystancjach przejścia na właściwości eksploatacyjne kryterium Voltage Vector Shift.
EN
The paper describes the problems accompanying the separation of an unintentional, uncontrolled island. Various criteria that can be used in the detection of island operation of generating units have been presented. In addition, the features of individual criteria are described, as well as the difficulties in their operation. Additionally, the tests of the protection relay equipped with the Voltage Vector Shift criterion are described in detail. They proved the negative influence of external phenomena occurring in the power system, i.e., single-phase and three-phase short-circuit with different fault resistances, to the operational properties of the Voltage Vector Shift criterion.
PL
Jednym z trendów, które są obserwowane we współczesnych systemach elektroenergetycznych jest stopniowa decentralizacja, będąca w dużej mierze efektem rosnącej roli generacji rozproszonej oraz ewolucją odbiorców w stronę prosumeryzmu. Rośnie rola lokalnego bilansowania i rodzi się zapotrzebowanie na powstawanie lokalnych struktur organizacyjnych, dążących do wydzielenia części infrastruktury elektroenergetycznej. Rodzi to nie tylko wyzwania techniczne ale także organizacyjne, prawne i ekonomiczne. Wydzielone struktury organizacyjne mogą funkcjonować w różnych formach: od niewielkich układów producenckich do wydzielonych mikrosystemów energetycznych (spółdzielni, klastrów czy „wysp” energetycznych). W artykule opisano problemy współpracy wydzielonych obszarów z systemem elektroenergetycznym.
EN
One of the trends observed in modern power systems is gradual decentralization, which is largely the result of the growing role of distributed generation and the evolution of consumers towards prosumerism. The role of local balancing is growing and there is a need for the creation of local organizational structures aimed at separating part of the power infrastructure. This raises not only technical but also organizational, legal and economic challenges. Separate organizational structures can function in various forms: from small producer systems to separate energy microsystems (cooperatives, clusters or energy "islands"). The article describes the problems of cooperation between selected energy microsystems and the power system.
PL
W artykule przedstawiono metody ograniczania przekroczeń napięciowych w sieciach niskiego napięcia powodowane pracą mikroinstalacji wytwórczych. Wzrost liczby pracujących instalacji, głównie fotowoltaicznych spowodował problemy polegające na przekraczaniu maksymalnego dopuszczalnego napięcia, co z kolei prowadzi do wyłączenia instalacji przez zabezpieczenia oraz utraty możliwości produkowania energii elektrycznej. Wyłączenie instalacji ze względu na występowanie przekroczeń napięciowych powoduje reklamacje prosumentów ze względu na niedotrzymanie przez OSD wymaganych warunków jakości energii w sieci. W artykule omówiono dostępne metody ograniczania tych przekroczeń oraz podjęto próbę wskazania praktycznych działań uzasadnionych technicznie i optymalnych ekonomicznie zarówno dla prosumentów jak i spółek zajmujących się dystrybucją energii elektrycznej.
EN
The article presents methods of limiting voltage excesses in low voltage grids caused by the micro-installations. The increase in the number of operating installations, mainly photovoltaics, caused problems consisting in exceeding the maximum allowable voltage, which led to the shutdown of the installation by overvoltage protection. The shutdown of the installation due to the occurrence of voltage overruns causes complaints from prosumers due to the DSO's failure to meet the required power quality conditions in the grid. The paper discusses the available methods of limiting these exceedances and attempts to indicate practical methods, technically justified and economically optimal for both prosumers and DSO’s.
PL
Jednym z negatywnych skutków wprowadzania do sieci niskiego napięcia (nN) rozproszonych źródeł energii jest nadmierny wzrost napięcia. W artykule opisano wymogi kodeksu sieci RfG nałożone na mikroinstalacje fotowoltaiczne, mające na celu zapobiegać przekroczeniom dopuszczalnego poziomu napięcia w sieci. Wpływ zmian wprowadzonych w RfG zaprezentowano w dobowych symulacjach wykonanych w programie Power Factory dla przykładowej sieci niskiego napięcia. Wyniki zestawiono z efektami metody niestosowanej dotąd w sieciach nN – regulacji napięcia w transformatorze pod obciążeniem. Symulacje pokazują, że choć RfG wprowadza pozytywne zmiany, to sterowanie napięciem może być bardziej efektywne, gdy tryb pracy Q(U) falowników połączy się z pracą podobciążeniowego przełącznika zaczepów transformatora.
EN
Excessive voltage rise is one of the most significant negative effects of connecting distributed energy resources to the low-voltage (LV) networks. The article describes the requirements of the RfG network code imposed on photovoltaic microinstallations, aimed at preventing exceeding the permissible voltage level in the grid. The impact of the changes introduced in the RfG was presented in daily simulations made in PowerFactory for an exemplary LV grid. The results were compared with the effects of the method that has not been used in LV networks so far - voltage regulation in the transformer onload tap changer (OLTC). The simulations showed that - although the RfG introduces positive changes - voltage control can be more effective when the Q(U) operating mode of the inverters is combined with the OLTC operation.
11
Content available remote Ferroresonance in distribution systems – state of the art
EN
Recently, there are increasing interest in studying the ferroresonance phenomenon, due to the various problems it causes to power quality and the destruction of network parts, insulators and consumer devices. As the ferroresonance leads to a significant increase in voltage or/and current with harmonic presence, both of which represent a threat to the stability of the electrical network and its parts. The influence of ferroresonance on the distribution system is crucial because the distribution system is the network's closest part to the consumer, and any effect it has will have an impact on the customer. This paper presents a state of the art of ferroresonance problem. The most visible signals for ferroresonance and analytical methods used to indicate its occurrence are presented. The investigation of ferroresonance in the radial distribution system and the effect of integrating Distributed Generation (DG) into the distribution zone on this phenomenon are presented. The latest methods used to mitigate and prevent ferroresonance are discussed. Furthermore a technique for suppressing ferroresonance is implemented. The ferroresonance in power transformer and the effect of load variation on it will be presented. PSCAD/EMTDC software is used to simulate the study.
PL
Ostatnio obserwuje się coraz większe zainteresowanie badaniem zjawiska ferrorezonansu, ze względu na różne problemy, jakie powoduje w zakresie jakości zasilania oraz niszczenia elementów sieci, izolatorów i urządzeń konsumenckich. Ponieważ ferrorezonans prowadzi do znacznego wzrostu napięcia lub/i prądu z obecnością harmonicznych, które to oba stanowią zagrożenie dla stabilności sieci elektrycznej i jej części. Wpływ ferrorezonansu na system dystrybucyjny jest kluczowy, ponieważ system dystrybucyjny jest częścią sieci najbliższą konsumentowi, a każdy jego wpływ będzie miał wpływ na klienta. Artykuł przedstawia aktualny stan wiedzy na temat ferrorezonansu. Przedstawiono najbardziej widoczne sygnały dla ferrorezonansu oraz metody analityczne służące do wskazania jego występowania. Przedstawiono badania ferrorezonansu w promieniowym układzie dystrybucyjnym oraz wpływ integracji Generacji Rozproszonej (DG) w strefę dystrybucji na to zjawisko. Omówiono najnowsze metody stosowane do łagodzenia i zapobiegania ferrorezonansowi. Ponadto wdrażana jest technika tłumienia ferrorezonansu. Przedstawiony zostanie ferrorezonans w transformatorze mocy i wpływ na niego zmian obciążenia. Do symulacji badania stosuje się oprogramowanie PSCAD/EMTDC.
EN
Distributed generation (DG) systems have been widely applied in power systems and will also be the dominant part of future power systems. This type of generation system has features that are distinctive among non-renewable huge capacity fossil and nuclear power generation systems. These types of distributed generation are comparatively very small and most оf them are constructed for the application оf nonconventional energy such as hydraulic power or wind power in the generation of electricity. And, whenever this type of DG system аre functioned in parallel together with main utility power systems, then particularly the power quality problem beсоme more significant with reverse power flow. Reliability, frequency deviation, harmonics, and voltage deviation of the power system are the main power quality problems. Also, a critical, and major problem of power quality is аn islanding protection. Tо resolve islanding problems, the detectors of islanding conditions аre used tо find аn islanded situation and allow the circuit breaker to trip. These circuit breakers are available in between the distributed generation and the power system. This Paper presents а nоvel concept оf the detection of islanding by the support of Slip Mоde Frequency Shift (SMFS) technique fоr the defense оf distributed generator fed systems from the Islanding conditions which has been tested and verified by the help of the proposed Simulink diagram on Matlab-2021a platform.
PL
Systemy generacji rozproszonej (DG) są szeroko stosowane w systemach elektroenergetycznych i będą również dominującą częścią przyszłych systemów elektroenergetycznych. Ten typ ma cechy charakterystyczne dla nieodnawialnych systemów wytwarzania energii z paliw kopalnych i jądrowych o dużej mocy. Różne rodzaje generacji rozproszonej są porównywalnie małej mocy i większość z nich jest konstruowana do wykorzystywania energii niekonwencjonalnej, takiej jak energia hydrauliczna lub energia wiatru do wytwarzania energii elektrycznej. I kiedy ten typ systemu DG działa równolegle z głównymi systemami zasilania, to szczególnie problemy z jakością zasilania stają się bardziej znaczące przy odwróconym przepływie mocy. Niezawodność, odchylenie częstotliwości, harmoniczne i odchylenie napięcia systemu elektroenergetycznego to główne problemy dotyczące jakości energii. Ponadto krytycznym i głównym problemem jakości energii jest ochrona wysp. Aby rozwiązać problemy związane z wyspą, detektory warunków wyspowych są wykorzystywane do wykrycia szczególnej sytuacji na wyspie i umożliwienia przerwania obwodu. Wyłączniki są dostępne pomiędzy generacją rozproszoną a systemem elektroenergetycznym. Niniejsza praca przedstawia nowatorską koncepcję wykrywania zjawisk wyspowych przy pomocy techniki przesunięcia trybu poślizgu częstotliwości (SMFS) do ochrony systemów zasilanych z generatorów rozproszonych przed warunkami wyspowymi. Pomysł został przetestowany i zweryfikowany za pomocą proponowanego diagramu Simulinka na platformie Matlab-2021a.
EN
This paper proposes to hybridize the Whale Optimizer (WOA) and Particle Swarm Optimization (PSO) algorithms to achieve optimal integration of Distributed Generator (DG) based photovoltaic sources in the search for optimal allocation. Optimal integration reduces the Active Power Loss (APL) index and enhances the Total Voltage Variation (TVV) index and the Total Operating Cost (TOC) index. The proposed hybrid PSO-WOA algorithm is validated on standard IEEE 33-bus and 69-bus Electrical Distribution Systems (EDS). Numerical and graphical comparative studies were conducted to benchmark the hybrid approach results against those obtained using other powerful algorithms and techniques existing in the literature. Active and reactive branch currents are calculated and plotted to show how the DG affects current flows in the EDS. To make the results more realistic, linear load level variation is considered, with the loads varying from 60% to 120% of the rated loading level.
PL
Istnieje pewna propozycja zarówno dla dużej, jak i małej energetyki, a szczególnie dla generacji rozproszonej. Polega ona na wykorzystaniu biomasy i prądu elektrycznego generowanego w okresach wymuszonego zmniejszenia obciążenia bloków węglowych, by Krajowy System Energetyczny (KSE) mógł przyjąć produkcję ze źródeł OZE.
PL
W artykule przedstawiono wybrane wymagania techniczne stawiane generacji rozproszonej zawarte w Kodeksie Sieciowym, Instrukcjach Ruchu i Eksploatacji Sieci Dystrybucyjnych oraz w zaleceniach opracowanych dla operatorów sieci. Skupiono się na aspekcie elektroenergetycznej automatyki zabezpieczeniowej oraz automatyki regulacyjnej. Wskazano podobieństwa, ale również podkreślono różnice w zapisach zawartych w analizowanych dokumentach.
PL
W artykule przedstawiono wybrane wymagania techniczne stawiane generacji rozproszonej zawarte w kodeksie sieciowym, Instrukcjach Ruchu i Eksploatacji Sieci Dystrybucyjnych oraz w zaleceniach opracowanych dla operatorów sieci. Skupiono się na aspekcie elektroenergetycznej automatyki zabezpieczeniowej oraz automatyki regulacyjnej. Wskazano podobieństwa, ale również podkreślono różnice w zapisach zawartych w analizowanych dokumentach.
EN
The article describes selected technical requirements for distributed generation contained in the network code, Distribution System Operator requirements, and recommendations developed for network operators. The aspects of power system protection and control automation were focused on. Similarities were indicated, but also differences in the provisions contained in the analyzed documents were highlighted.
EN
The conventional port distribution power system is being disrupted by increasing distributed generation (DG) levels based on integrated energy. Different new energy resources combine with conventional generation and energy storage to improve the reliability of the systems. Reliability assessment is one of the key indicators to measure the impact of the distributed generation units based on integrated energy. In this work, an analytical method to investigate the impacts of using solar, wind, energy storage system (ESS), combined cooling, heating and power (CCHP) system and commercial power on the reliability of the port distribution power system is improved, where the stochastic characteristics models of the major components of the new energy DG resources are based on Markov chain for assessment. The improved method is implemented on the IEEE 34 Node Test Feeder distribution power system to establish that new energy resources can be utilized to improve the reliability of the power system. The results obtained from the case studies have demonstrated efficient and robust performance. Moreover, the impacts of integrating DG units into the conventional port power system at proper locations and with appropriate capacities are analyzed in detail.
EN
Feeder reconfiguration (FR), capacitor placement and sizing (CPS) are the two renowned methods widely applied by the researchers for loss minimization with node voltage enrichment in the electrical distribution network (EDN), which has an immense impact on economic savings. In recent years, optimization of FR and CPS together can proficiently yield better power loss minimization and save costs compared to the individual optimization of FR and CPS. This work proposes an application of an improved salp swarm optimization technique based on weight factor (ISSOT-WF) to solve the cost-based objective function using CPS with and without FR for five different cases and three load levels, subject to satisfying operating constraints. In addition, to ascertain the impact of real power injection on additional power loss reduction, this work considers the integration of dispersed generation units at three optimal locations in capacitive compensated optimal EDN. The effectiveness of ISSOT-WF has been demonstrated on the standard PG&E-69 bus system and the outcomes of the 69-bus test case have been validated by comparing with other competing algorithms. Using FR and CPS at three optimal nodes and due to power loss reduction, cost-saving reached up to a maximum of 71%, and a maximum APLR of 26% was achieved after the installation of DGs at three optimal locations with the significant improvement in the bus voltage profile.
19
Content available remote Review on techniques of optimal placement and sizing of DG in distribution systems
EN
Distributed generation (DG)is a term describing the generation of the electricity use on other side rather than transmitting energy over the electric grid. By using this (Distribution generation) DG in power system plays a major role in improving voltage profile, reduce the power losses and improves stability of the substation. Distribution generations (DG) are located near to load centres, so care should be taken while allocating DG in the power system to increases the benefits. By placing the distributed generators in the distribution system (primary distribution system) the real, reactive power and improving the voltage profile can be managed in optimal way will be explained in this paper. Optimal Allocation of the DG is identified by using the using the VSI, ratings are computed by using the different optimal techniques. The power loss reduction and better voltage regulation can be attained by using the optimal techniques. A clear and complete analysis of performance should be carried throughout the work to demonstrate the efficiency of the system.
PL
Generacja rozproszona (DG) to termin opisujący wytwarzanie energii elektrycznej po drugiej stronie, a nie przesyłanie energii przez sieć elektryczną. Dzięki zastosowaniu tego (Generacja dystrybucyjna) DG w systemie elektroenergetycznym odgrywa główną rolę w poprawie profilu napięcia, zmniejszeniu strat mocy i poprawie stabilności podstacji. Generacje dystrybucyjne (DG) znajdują się w pobliżu centrów obciążenia, dlatego należy zachować ostrożność podczas przydzielania DG w systemie elektroenergetycznym, aby zwiększyć korzyści. Poprzez umieszczenie rozproszonych generatorów w systemie dystrybucyjnym (pierwotny system dystrybucyjny) w niniejszym artykule zostanie wyjaśniona rzeczywista moc bierna i poprawa profilu napięcia. Optymalna alokacja DG jest identyfikowana przy użyciu VSI, oceny są obliczane przy użyciu różnych optymalnych technik. Zmniejszenie strat mocy i lepszą regulację napięcia można osiągnąć przy użyciu optymalnych technik. W trakcie prac należy przeprowadzić jasną i kompletną analizę wydajności, aby wykazać skuteczność systemu.
EN
In the article the prediction of wind speed values by Newton interpolation polynomials is made. It is mentioned that effective operation of the wind power station is realized by predictive control on the basic interval according to the predictor–corrector method. Equations for Newton interpolation polynomials are given. The fluctuations of the wind speed deviations occur random so can be described with Wiener process. An ex ample of wind speed deviations, described with Wiener process, is shown. Equation to estimate the prediction error is given. The results of wind speed values prediction taking into ac-count the Wiener process that simulates its fluctuations are shown. The wind speed prediction for 1 hour in advance without taking into account the Wiener process is shown depending on the degree of the interpolation polynomial. The prediction errors at different degrees of the interpolation polynomials and the prediction for different number of hours in advance are given. It is noted that with the removal of a random component in the form of Wiener process, the average error of the prediction decreases.
PL
W artykule dokonano symulacji wartości prędkości wiatru na podstawie wielomianów interpolacyjnych Newtona. Wspomniano, że efektywna praca elektrowni wiatrowej realizowana jest poprzez kontrolę predykcyjną w podstawowym przedziale zgodnie z metodą predykcyjno-korektorową. Podano równania dla wielomianów interpolacyjnych Newtona. Fluktuacje odchyleń prędkości wiatru występują losowo, dlatego można je opisać w procesie Wienera. Pokazano przykład odchyleń prędkości wiatru, opisany w procesie Wienera. Podano równanie do oszacowania błędu prognozowania. Pokazano wyniki symulacji prędkości wiatru z uwzględnieniem procesu Wienera, który symuluje jego fluktuacje. Prognozę prędkości wiatru z 1-godzinnym wyprzedzeniem bez uwzględnienia procesu Wienera pokazano w zależności od stopnia wielomianu interpolacji. Podano błędy prognozowania dla różnych stopni wielomianów interpolacyjnych i przewidywania dla różnej liczby godzin wcześniej. Należy zauważyć, że wraz z usunięciem elementu losowego w postaci procesu Wienera zmniejsza się średni błąd prognozy.
first rewind previous Strona / 12 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.