Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 4

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  fugitive emission
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The aim of this paper is to localize the fugitive leaks from the above ground facilities of the existing system of Titas Gas (TG) after developing mathematical model for fugitive emission. Soap screening techniques and Gasurveyor 500 series instrument were used in this study for detecting potential leaks. Leaked gas was quantified using either Hi-Flow gas sampler or bagging measurements system. The results show that the respective potential gas leaking point of City Gate Station (CGS), commercial Regulating and Metering Station (RMS), industrial RMS, residential RMS and Town Bordering Station (TBS)/ District Regulating Station (DRS) are scrubber dump valve (average leak rate 217.00 L/min), insulating point (average leak rate 4.04 L/min), tube fitting connector (average leak rate 8.00 L/min), connector (average leak rate 1.55 L/min) and pressure relief valve (average leak rate 437.92 L/min). Fugitive methane emission can be reduced by stopping leaks of fittings or components having high KLeak  value.
EN
Coke oven battery is a complex and multifaceted facility in terms of air pollutant emissions. As far as stack or quenching tower does not cause major difficulties of emission measurement, the fugitive emission measurement from such sources as battery top elements (charging holes, ascension pipes) or oven doors is still complicated and not fully solved problem. This article presents the discussion concerning main problems and errors likely to be made in particular stages of procedure of fugitive emissions characterization from coke oven battery (selection of sampling points, sampling itself, measurement of air velocity over battery top and laboratory analyses). In addition, results of concentrations measurements of selected substances characteristic for the coking process (naphthalene, anthracene, 4 PAHs and TSP) originating from fugitive sources of coke oven battery and subjected to reporting under the E-PRTR are presented. The measurements were carried out on a coke oven battery top in points selected on the basis of the preceding detailed air convection velocity measurements over the battery top. The results of the velocity measurements were compared with results of numerical modelling using CFD software. The presented material is an attempt to cross-sectional presentation of issues related to the quantitative evaluation of fugitive emission from coke oven battery, discussed on the example of PAHs emission as a group of substances characteristic for coking of coal.
PL
Celem publikacji jest przedstawienie założeń techniczno-technologicznych redukcji emisji niezorganizowanej z drzwi piecowych i otworów technologicznych baterii koksowniczej realizowanej za pomocą Systemu Regulacji Ciśnienia Gazu Surowego „ZaReO”. Zaprezentowano koncepcję techniczną i rozwiązanie konstrukcyjne Zaworu Regulacyjno-Odcinającego, który jest głównym elementem wykonawczym Systemu Regulacji Ciśnienia. Opisano sposób przeprowadzania testów na instalacji badawczej i pilotowej. Przedstawiono przeprowadzone na instalacji demonstracyjnej, w warunkach przemysłowych baterii koksowniczej, wyniki prób zaworu oraz całego systemu regulacji ciśnienia. W czasie prowadzenia testów przemysłowych stwierdzono ograniczenie emisji niezorganizowanej na komorach obsługiwanych przez System Regulacji Ciśnienia „ZaReO”.
EN
The aim of the publication is presentation of technical and technological assumptions for fugitive emission reduction from coke oven doors and technological openings of coke oven battery by Raw Gas Pressure Regulation System “ZaReO”. Technical conception and constructional solution of Control-Cut-off Valve, which is the main executive element of Pressure Regulation System, has been presented. A way of tests conducting in research and pilot plant has been described. Realized on demonstration plant in industrial condition, results of valve tests and entire pressure regulation system have been presented. During conducting the industrial tests, reduction of fugitive emission in coke oven chamber operating with Pressure Regulation System “ZaReO” has been stated.
PL
Bateria koksownicza stanowi dosyć skomplikowany i niejednorodny obiekt z punktu widzenia emisji zanieczyszczeń do powietrza. O ile emisja ze źródeł zorganizowanych baterii, jak komin czy wieża gaszenia, nie sprawia większych trudności pomiarowych, o tyle emisja ze źródeł niezorganizowanych, jak strop baterii czy drzwi komór, wciąż pozostaje nie w pełni rozwiązanym problemem. W niniejszym artykule przedstawiono wyniki pomiarów stężeń wybranych substancji charakterystycznych dla procesu koksowania (naftalenu, antracenu, benzo(a)pirenu, benzo(b)fluorantenu, benzo(k)fluorantenu, indeno(1,2,3-cd)pirenu oraz pyłu), pochodzących ze źródeł niezorganizowanych na baterii koksowniczej i objętych obowiązkiem raportowania w ramach E-PRTR. Pomiary przeprowadzono w wytypowanych punktach na stropie baterii koksowniczej, wybranych na podstawie poprzedzających je szczegółowych pomiarów prędkości unoszenia powietrza nad stropem. Wyniki pomiarów prędkości unoszenia porównano z wynikami modelowania komputerowego z wykorzystaniem oprogramowania CFD. Ponadto przedyskutowano problemy i błędy możliwe do popełnienia w poszczególnych etapach wyznaczania emisji z baterii (wybór miejsc pomiarowych, pobór próbek, analizy laboratoryjne oraz wyznaczanie prędkości unoszenia powietrza nad stropem). Zaprezentowany materiał stanowi próbę przekrojowego przedstawienia zagadnień związanych z ilościowym wyznaczaniem emisji niezorganizowanej z baterii pieców koksowniczych, omówionej tutaj na przykładzie emisji WWA jako grupy substancji charakterystycznych dla procesu koksowania węgla.
EN
Coke oven battery is complex and multifaceted facility in terms of air pollutant emissions. As far as the battery stack emission, as stack or quenching tower does not cause major difficulties of measuring, the fugitive emission from sources such as battery roof or oven doors is still not fully solved problem. This article presents the results of concentration measurements of selected substances typical for the coking process (naphthalene, anthracene, benzo(a)pirene, benzo(b)fluorantene, benzo(k)fluorantene, indeno(1,2,3-cd)pirene and dust) from fugitive sources of coke oven battery and subjected to reporting under the E-PRTR. The measurements were carried out in selected locations on coke oven battery roof selected on the basis of the preceding detailed air velocity measurements over the roof. Results of the velocity measurements were compared with results of numerical modelling using CFD software. In addition, problems and errors likely to be made in particular stages of procedure of emissions determination from coke oven battery (selection of sampling points, sampling, laboratory analyses and measurement of air velocity over battery roof). The presented material is an attempt to cross-sectional presentation of issues related to the quantitative evaluation of fugitive emission from coke oven battery, discussed on the example of PAH emission as a group of substances characteristic for coking of coal.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.