Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 2

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  force-deformation
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The article presents research methods and appropriate equipment for conducting experiments, as well as the analysis of the results. Studies on the hardness of the microstructure, elastic deformation and parts and samples were carried out using hardness testers, microscopes PMT-3, MIM-8 and devices for measuring the “force-strain” characteristic. The results of the study wer used to establish the dependence of the elastic properties of Belleville springs on the heat treatment modes, while also determining the microstructure and layer depth using various research methods. Every work studying the elastic properties and measurement of the static compressive force of a spring at a given strain value has been studied theoretically. Depending on the operating conditions, disc springs can be installed singly or assembled into packages, forming an elastic element working under compression. The research materials will be used in the work to improve the tightness of straight-through valves and the durability of the shut-off assembly parts. The dependence of the spring compression force and its deformation on the geometrical parameters of the disc springs has been established. Comparison of experimental and theoretical dependences has been made. It has been established that the residual deformation of the Belleville spring after captivity has a negative effect on the tightness of the shut-off valve assembly. The influence of various technological processes and modes of thermal treatment of disc springs on their elastic properties has been studied. Practical recommendations for improving the technological process of thermal treatment of Belleville springs have been proposed. The tasks of further research and implementation of the obtained results have been determined. Search work has been carried out to improve the technology of hardening processing of parts of the shut-off unit (gate and seat) of direct-flow valves. The possibility of using accelerated nitrocarburizing in a triethanolamine medium with induction heating by high-frequency currents at a temperature range of 950°С for boriding and borochroming has been established. Samples were made from standard steel grades 40, 40Kh and 38Kh2MYuA, subjected to hardening by the considered methods, and a study was made of the hardness, depth and microstructure of the hardened layer. Research in this direction should be continued in order to study the tribological characteristics (friction coefficient and wear resistance) of hardened parts. Each operation of the spring manufacturing technology has been studied, and deviations that have a significant impact on the operation of the spring and the sealing of the shut-off valve assembly have been identified.
PL
Artykuł przedstawia metody badawcze i odpowiednie wyposażenie służące do przeprowadzania eksperymentów, a także analizę wyników. Badania przyprowadzono przy użyciu testerów twardości, mikroskopów PMT-3, MIM-8 oraz urządzeń do pomiaru charakterystyki “siła-odkształcenie”. Wyniki tych badań wykorzystano do ustalenia zależności właściwości elastycznych sprężyn Belleville od parametrów obróbki cieplnej, jednocześnie określając mikrostrukturę i głębokość warstwy za pomocą różnych metod badawczych. Każdy przypadek badania właściwości elastycznych i pomiaru statycznego siłowego odkształcenia sprężyny przy danej wartości odkształcenia był analizowany teoretycznie. W zależności od warunków pracy sprężyny tarczowe mogą być montowane pojedynczo lub w pakietach, tworząc element elastyczny podlegający ściskaniu. Materiały badawcze mogą zostać wykorzystane w pracach mających na celu poprawę szczelności zasuw oraz trwałości części zespołu zamykającego. Ustalono zależność między siłą kompresji sprężyny i jej odkształceniem a parametrami geometrycznymi sprężyn tarczowych. Dokonano porównania wyników eksperymentalnych i teoretycznych. Ustalono, że szczątkowe odkształcenie sprężyny Belleville po jej zamontowaniu ma negatywny wpływ na szczelność zespołu zaworu zamykającego. Zbadano wpływ różnych procesów technologicznych i trybów obróbki cieplnej sprężyn tarczowych na ich właściwości elastyczne. Zaproponowano praktyczne zalecenia w celu poprawy procesu technologicznego obróbki cieplnej sprężyn Belleville. Określono cele dalszych badań i sposób wdrożenia uzyskanych wyników. Przeprowadzono prace badawcze w celu poprawy technologii hartowania części zespołu zamykającego (zasuwy i gniazda) zasuw klinowych. Sprawdzono możliwość zastosowania przyspieszonego azotonawęglania w środowisku trietanoloaminy z indukcyjnym ogrzewaniem prądem o wysokiej częstotliwości w zakresie temperatury 950°C w procesie borowania i borochromowania. Wykonano próbki ze standardowych gatunków stali 40, 40Kh i 38Kh2MYuA, które poddano hartowaniu przy rozważanych metodach, przeprowadzono badanie twardości, głębokości i mikrostruktury warstwy hartowanej. Badania w tym kierunku powinny być kontynuowane w celu zbadania charakterystyk tribologicznych (współczynnika tarcia i odporności na zużycie) hartowanych części. Przeanalizowano każdą fazę technologii produkcji sprężyny i zidentyfikowano odchylenia, które mają znaczący wpływ na działanie sprężyny i uszczelnienie zespołu zaworu zamykającego.
EN
The paper presents the results of many years of experience in studying the efficiency of sealing units in the conditions of their operation in the oil and gas production system, as well as the influence of technological parameters that ensure normal operation and protect them from failure due to leakage through the working surface of the seals in the friction zone. In addition, according to the results of practical studies, it has been established that, in order to improve the elastic properties, for example, of cup springs of a direct-flow valve, we calculated heat treatment of the operational values of spring compression for various material thicknesses. The work of the elastic elements of the packer was improved mainly by the design, and the optimal parameters for the development of the elastic element of the packer were determined. The study of the stress-strain state of the sealing element of packers during setting and improving its performance is of both practical and scientific interest. One of the factors that significantly affect operation of pumps is the fluid leakage in valve assemblies in order to identify the effect of the above parameters on tightness based on a preliminary theoretical analysis. Comparison of data during the study showed that the flow rate of work with low viscosities is greater than with high viscosities. The technological processes of hardening the parts of the shut-off assembly of X-mas tree valves, to increase their reliability, are considered. The dependence of the compression force of the spring and its deformation because of geometric parameters of the disk springs has been determined; it has been found that the residual deformation of the disk spring after collapse has a negative effect on tightness. Calculations show that the amount of leakage of the elastic elements in the sealing assembly should not exceed ≤0.309, since the seal at the value of elastic energy deformation provides a self-compacting mode. Thus, the degree of uneven pressing of the seat to the surface of the gate and its regulation to prevent leakage is practically determined.
PL
Artykuł przedstawia wyniki wieloletnich doświadczeń w badaniu skuteczności zespołów uszczelniających, w warunkach ich pracy w systemie wydobywczym ropy i gazu, jak również wpływ parametrów technologicznych zapewniających ich normalną eksploatację i zabezpieczających je przed awarią spowodowaną wyciekiem przez powierzchnię roboczą uszczelnienia w strefie tarcia. Ponadto, zgodnie z wynikami badań o charakterze praktycznym, ustalono, że aby poprawić właściwości sprężyste, np. sprężyn talerzowych zaworu bezpośredniego przepływu, obliczono obróbkę cieplną wartości eksploatacyjnych ściśnięcia sprężyny dla różnych grubości materiału. Praca elementów sprężystych uszczelniacza została poprawiona głównie dzięki projektowi oraz ustalono optymalne parametry dla budowy elementu sprężystego uszczelniacza. Badania stanu naprężenie-odkształcenie elementu uszczelniającego uszczelniacza w czasie posadowienia oraz poprawa jego działania są interesujące zarówno ze względów praktycznych, jak i naukowych. Jednym z czynników znacząco wpływających na pracę pomp jest wyciek płynu w zespołach zaworów, co pozwoliło na określenie wpływu powyższych parametrów na szczelność w oparciu o wstępną analizę teoretyczną. Porównanie danych w czasie badania wykazało, że prędkość przepływu pracy z niskimi lepkościami jest większa niż z wysokimi lepkościami. Rozważane są procesy technologiczne utwardzania części zespołu odcinającego zaworów choinkowych w celu zwiększenia ich niezawodności. Ustalono zależność siły ściskania sprężyny i jej odkształcenia ze względu na parametry geometryczne sprężyn talerzowych; stwierdzono, że odkształcenie resztkowe sprężyny talerzowej po zgnieceniu ma negatywny wpływ na szczelność. Obliczenia wykazują, że wielkość wycieku elementów sprężystych w zespole uszczelniającym nie powinna przekraczać ≤0,309, gdyż uszczelnienie przy wartości odkształcenia energii sprężystej zapewnia tryb samoczynnego zagęszczania. Tak więc stopień nierównomiernego dociśnięcia gniazda do powierzchni zasuwy i jego regulacja w celu przeciwdziałania wyciekowi został praktycznie określony.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.