Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 8

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  falownik trójpoziomowy
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The neutral point clamped (NPC) three-level inverter is widely used in high-voltage and high-power applications. However, neutral point voltage oscillation (NPVO) and common-mode voltage (CMV) problems exist in the NPC three-level inverter. In this paper, an improved virtual space vector modulation (VSVM) is proposed based on the reconstruction of a virtual small vector and a virtual medium vector. Compared with the traditional VSVM, an improved VSVM can effectively reduce the CMV. On this basis, a vector conversion method is proposed to further reduce the NPVO in the whole range. Simulation results verify the effectiveness and superiority of the improved VSVM.
PL
Branża górnicza oraz przemysł ciężki są niezwykle wymagające w zakresie zastosowań przekształtników energoelektronicznych zarówno w odniesieniu do zapewnienia bezpieczeństwa, jak i parametrów pracy. Do zasilania urządzeń większej mocy często stosuje się podwyższone napięcie sieciowe, np. w Polsce jest to napięcie 3 x 1000 V (RMS, międzyfazowe), w Turcji – 1100 V, a w Rosji – 1140 V. Regulacja prędkości obrotowej maszyn zasilonych takim napięciem wymaga zastosowania dedykowanych falowników napędowych. W odpowiedzi na zapotrzebowanie branży górniczej firma ZE Twerd zaprezentowała rodzinę trójpoziomowych falowników napędowych o mocach od 55 do 800 kW, dedykowanych do pracy z sieciowym napięciem zasilającym 3 x 1150 V.
EN
The paper presents an induction generator connected to the power grid using the AC/DC/AC converter and LCL coupling filter. In the converter, both from the generator and the power grid side, three-level inverters were used. The algorithm realizing pulse width modulation (PWM) in inverters has been simplified to the maximum. Control of the induction generator was based on the indirect field oriented control (IFOC) method. At the same time, voltage control has been used for this solution. The MPPT algorithm has been extended to the variable pitch range of the wind turbine blades. The active voltage balancing circuit has been used in the inverter DC voltage circuit. Synchronization of control from the power grid side is ensured by the use of a?PLL loop with the system of preliminary suppression of undesired harmonics (CDSC).
PL
W artykule przedstawiono układ generatora indukcyjnego współpracującego z siecią elektroenergetyczną z wykorzystaniem przekształtnika AC/DC/AC. W przekształtniku, zarówno od strony generatora jak i sieci, zastosowano falowniki trójpoziomowe. Jednocześnie maksymalnie uproszczono modulatory. Sterowanie generatora oparto na pośredniej orientacji wektora pola IFOC z wykorzystaniem algorytmu MPPT. W obwodzie pośredniczącym zastosowano układ równoważenia napięcia. Synchronizację sterowania zapewnia pętla PLL z układem CDSC.
EN
The article presents of an induction generator cooperating with a power grid using an AC/DC/AC converter. In the converter, both on the generator and network side, three-level inverters were used. Simultaneously, modulators have been simplified to a minimum. The generator's control was based on the indirect orientation of the field vector using the MPPT algorithm. In the intermediate circuit a voltage balancing system was used. Control synchronization is provided by the PLL-CDSC system.
PL
W artykule omówiono możliwe przyczyny niezbalansowania napięcia punktu neutralnego w przekształtniku z diodami poziomującymi oraz wpływ na to napięcie nakładania się fal nośnych w modulacji. W przedstawionym schemacie modulacji nakładanie się fal jest wynikiem zwiększenia amplitudy jednej z tych fal. Przedstawiono dyskusję wpływu proponowanej techniki na zmiany napięcia punktu neutralnego oraz zależności między współczynnikiem modulacji, stopniem nakładania się fal i współczynnikiem mocy. Wyniki badań symulacyjnych potwierdzają skuteczność działania.
EN
To address the neutral point voltage balance problem of the diode clamped three-level inverter, this paper analyzes the causes of unbalanced neutral point voltage and studies the impact of the carriers overlap on the neutral point voltage. A simple neutral point voltage control scheme using carrier overlapping sinusoidal pulse width modulation (SPWM) is proposed. The proposed scheme does not change the modulation waves, the amplitude of one carrier is increased to overlap the other carrier, and the neutral point voltage can be maintained balance by increasing the carriers amplitudes. The influence of the vertical overlap of carriers on neutral point balance is investigated in depth. The relationship among the neutral point voltage variation, modulation index, overlap of the carriers, and power factor is discussed in this paper. Simulation results show the neutral point voltage balancing control strategy based on SPWM is effective.
PL
W artykule zaproponowano metodę modulacji szerokości impulsów dla trójpoziomowego falownika napięcia z diodami poziomującymi. Przedstawiona strategia sterowania umożliwia stabilizację rozkładu napięcia na kondensatorach obwodu pośredniczącego falownika. Przedstawiono wyniki badań eksperymentalnych.
EN
The PWM strategy for three-level NPC inverter is proposed in this paper. Presented PWM strategy makes it possible to balance control of neutral point voltage. The results of experimental investigation are presented in a paper.
PL
Przeprowadzono syntezę układu sterowania przestrzennym wektorem prądu wyjściowego trójpoziomowego falownika napięcia z modulacją. Do syntezy układu sterowania chwilowymi wartościami prądu zastosowano podstawy teorii sterowania ślizgowego. Regulatory prądu pracują w naturalnym układzie współrzędnych trójfazowych. Przekształtnik zastosowano do sterowania ekstremalnego momentem elektromagnetycznym klatkowego silnika indukcyjnego o mocy 2,2 kW. Przeprowadzono badania w symulacyjne w programie Matlab-Simulik.
EN
The synthesis of control system of spice current vector with PWM was conducted. For control current the sliding mode control was used. The current controllers work in the natural three-phase coordinate system. The inverter was applied in extreme electromagnetic torque control with induction motor, with the power of 2,2 kW. The simulation calculations were done with used Matlab-Simulink.
PL
Przedstawiono wyniki badań dotyczące pasywnej stabilizacji rozkładu napięć w obwodzie pośredniczącym falownika trójpoziomowego NPC wskazujące na dobre uwarunkowania tej metody i możliwość jej wykorzystania w zastosowaniach praktycznych. Odpowiednio skonstruowana stabilizacja pasywna zapewnia stateczną pracę z podtrzymywaniem równowagi napięć i powrót napięcia niezrównoważenia do zerowej wartości średniej po ewentualnym zaburzeniu tej równowagi.
EN
The paper presents and discusses some test results pertaining to the passive control of the DC-link midpoint voltage in the three-level NPC inverter. The results indicate that the method is well-behaved, insuring stable operation with balanced voltages across both capacitors in the DC link, convergence to a voltage balance after possible disturbances and low sensitivity to asymmetries in the inverter load.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.