Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  external tendon
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
In this study, ultrahigh-performance concrete (UHPC) was utilized in precast segmental beams to reduce the self-weight, shorten the construction time, and improve the performance and durability of bridges. Owing to the discontinuity in the joints, shear behavior plays a critical role in the overall structural performance of precast UHPC segmental beams (PUSBs). Therefore, four dry-jointed segmental specimens along with one monolithic specimen were designed and tested under a two-point concentrated load with various joint types, shear span-to-depth ratios (λ), and numbers of shear keys. Two types of shear failure modes were observed in the tests: shear compression failure of the web (λ = 1.44 and 2.56) and local shear failure of the flanges at the joint (λ = 3.67). The shear capacity, stiffness, and cracking load of the dry-jointed segmental specimens were lower than those of the monolithic specimen, and the single-keyed specimen exhibited better shear behavior than the three-keyed specimen. Increasing λ decreased the shear strength and stiffness of the segmental beams and considerably affected their failure modes and crack distributions. Additionally, four UHPC design codes were evaluated for their accuracy in estimating the shear strength of the specimens, and a simplified strut-and-tie model was developed to predict the shear strength of externally pre-stressed PUSBs. Finally, several design recommendations were proposed. This study is expected to facilitate the research and application of PUSBs.
PL
W artykule zaprezentowano przegląd dostępnych na rynku rodzajów zewnętrznych cięgien sprężających, opisując zarówno ich zalety, jak też wady i ograniczenia.
EN
Durability of external tendons is becoming an increasingly important aspect for bridges built in Poland over the last 20 years. Several corrosion issues have been experienced. The majority of tendons are composed of bare strands in a HDPE duct filled with cement grout. This paper presents corrosion protection strategies as defined in fib Bulletin 97 and examples of external tendons representing different protection levels within their classification. Advantages and disadvantages of specific PT systems are evaluated, so that the reader may choose the solution suitable for their particular case.
PL
Główną konstrukcję nośną istniejącego budynku stanowią żelbetowe stropy płytowo-żebrowe, oparte na żelbetowych słupach. Zaprojektowana nowa funkcja użytkowa była związana z koniecznością usunięcia słupów wewnętrznych podpierających stropodach. Przedstawiono rozwiązanie i realizację wzmocnienia oraz wyniki analizy obliczeniowej. Pomiary wykonane po zrealizowaniu wzmocnienia potwierdziły, że spełniło ono założone wymagania.
EN
The main load-bearing structure of the existing building is reinforced concrete ribbed slab based on reinforced concrete columns. The new function was associated with the need to remove internal columns supporting the roof. The solution and implementation of the strengthening as well as the results of computational analysis were presented. Measurements made after the strengthening confirmed that it met the assumed requirements.
PL
Przedstawiono koncepcje wzmocnienia dwóch baterii czterokomorowych silosów o kształcie "koniczynki", zbudowanych z elementów prefabrykowanych. Długotrwałe użytkowanie, zmiana rodzaju składowanego materiału i szczególny kształt przekroju konstrukcji wymagał szczegółowego przeanalizowania problemu. Zaproponowano trzy koncepcje wzmocnienia przez sprężenie zewnętrzne. Wybrane rozwiązanie zostało z powodzeniem zrealizowane.
EN
Paper presents development of strengthening concepts of silo battery consisted of two four-chamber tower sets with "four-leaf clover" cross-section made of thin-wall pre-cast concrete 3D elements. Change of storage material, time dependent degradation of structure and special shape of cross section required a specific assumption and structural analysis, which led to three concepts of strengthening by prestressing with external tendons. Chosen version was successfully realized.
PL
Omówiono system Acontank T6 wykonania zbiorników prefabrykowanych o ścianie użebrowanej sprężonej zewnętrznymi cięgnami bez przyczepności. Przedstawiono rozwiązanie konstrukcyjne i realizację oraz niektóre wyniki badań doświadczalnych dwóch tego rodzaju zbiorników.
EN
The description of the Acontank T6 system for execution of the precast concrete ribbed wall tanks prestressed by external unbonded tendons is presented. Moreover, the results of the first experimental investigations carried out for two tanks of this type, being under construction, are presented.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.