Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 16

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  etryngit
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Engineering activity may lead to uncontrolled changes in the geological environment. This paper presents an example of structural changes in fluvial sand of the Praski terrace (in Warsaw) caused by the activity of a temporary concrete batching plant. Our investigations made it possible to identify the material responsible for the structural anomalies observed in the bottom of the trench excavation. The compound responsible for the cementation phenomenon was identified as ettringite – hydrated calcium aluminosulphate: Ca6Al2[(OH)12(SO4)3]·26H2O. The source of ettringite were most probably significant volumes of contaminants coming from the temporary concrete batching plant (e.g., from the rinsing of concrete mixers and/or installations for concrete storage and transportation). While penetrating into the ground, ettringite caused extensive cementation of the soil mass, mainly in the saturation zone. As a result, the mineral (chemical) composition of the inter-grain space changed and the structure of the sand was strengthened. The estimated zone of volumetric changes in soil properties was about 6 thousand m3. However, analysis of the chemical composition of groundwater for its potential sulphate contamination, did not reveal any anomalous concentrations of sulphates.
EN
Self – Levelling Underlayment (SLU) is one of the high-performance new materials used in the construction industry. Besides the strength, other characteristics of SLU such as workability, rapid drying, rapid hardening, shrinkage compensation, smooth nature, etc. are required depending on the application. The aim of this study is to evaluate the structuration with the time of SLU through some important characteristics such as the evolution of rheological properties, ettringite, and gibbsite phase development. To this purpose, a rheometer with rotation mode and oscillation mode was used to determine the yield stress, plastic viscosity, rheological dynamic modulus (storage modulus and loss modulus). The use of these techniques is considered to be a method for monitoring structuration development in cement materials. The result shows that during the hydration process, increased plastic viscosity, yield stress, and dynamic modulus of the SLU were identified from just 5 minutes after mixing until the setting period when the transition from a fluid state to a solid-state of SLU takes place. By using a rheometer in oscillation mode, the beginning of the transition process from the liquid-state to the solid-state of SLU was identified, this method is more precise when compared to traditional Vicat method.
3
Content available remote Pułapki w chemii cementu
PL
W artykule przeprowadzono dyskusję zagadnień z chemii cementu, które nie mają naukowego wyjaśnienia. Są to zagadnienia dotyczące hydratacji cementu, które łączą się ze zwiększeniem objętości zaczynu, pomimo że reakcje klinkierowych faz bezwodnych z wodą są związane zawsze z kontrakcją, czyli ze zmniejszeniem objętości produktów tych reakcji. Z dyskusji tej wynika, że pomimo znacznego rozwoju aparatury badawczej nie opracowano do dnia dzisiejszego podstaw naukowych w pełni rozwiązujących te problemy. Natomiast można stwierdzić, że jako uzasadnienie pozostają w dalszym ciągu procesy przebiegające w małej objętości „in situ” i ciśnienie osmotyczne. Poczyniono jednak znaczny postęp w odniesieniu do ettringitu zwracając uwagę na duże znaczenie wodorotlenku wapnia w tym procesie.
EN
In the paper some problems of cement chemistry which have no scientific basis was discussed. There are the problems concerning the hydration of cement, which are concerning the expansion of cement paste, despite that the clinker anhydrous phases reactions with water is always linked with contraction i.e. the decrease of the total volume of the products. From this discussion it is evident that, despite of the important progress of scientific equipment, the scientific basis explaining these problems was not elaborated till to day. It can be stated, that as explanation the process occurring in the small volume - "in situ" still remains as well as the osmotic pressure. However, the significant progress can be observed relative to ettringite, where among others the importance of Ca(OH)2 content in cement for ettringite expansion was found.
PL
Normowe zaprawy z dwóch przemysłowych cementów: portlandzkiego i hutniczego zostały w przypadku jednej serii próbek napowietrzone. Próbki obu serii dojrzewały 28 dni w wodzie, a następnie zanurzone w wodnym roztworze Na2SO4. W próbkach z CEM I ekspansja wystąpiła po 33 miesiącach, natomiast zaprawy napowietrzone były nieznacznie trwalsze. Próbki zaprawy z CEM I zachowywały się podobnie po poddaniu 40 cyklom zamrażania i odmrażania, jednak próbki nienapowietrzone uległy znacznie szybszemu zniszczeniu. Zaprawy z cementu hutniczego były odporne na korozyjne działanie roztworu siarczanowego, natomiast po 40 cyklach zamrażania próbki nienapowietrzone wykazały dużą ekspansję. Można stwierdzić, że zachowanie wszystkich próbek było klasyczne, zgodne z przewidywaniami.
EN
The standard mortars of industrial Portland cement and blastfurnace cement were produced, of which one series remained non-air-entrained and the second was air-entrained. The mortars from both series were cured 28 days in water, and then immersed in Na2SO4 water solution. In the case of Portland cement samples the expansion occurred after 25 months and caused their destruction after 33 months, but air-entrained mortars were slightly more durable. The samples of CEM I, after 40 cycles of freezing and thawing were behaving similarly, however, non-air-entrained specimens were destructed much earlier. The mortars from CEM III cement was durable in Na2SO4 solution, however, non-air entrained samples high expansion after 40 cycles of freezing and thawing were showing. The behaviour of the mortars were classic and as it should be expected.
5
Content available remote Zagrożenia korozyjne podkładów kolejowych, cz.2
PL
Betonowe podkłady kolejowe mogą najczęściej ulegać zniszczeniu w wyniku opóźnionego powstawania ettringitu. Z uwagi na duże znaczenie tego problemu przeprowadzono badania betonu stosowanego do produkcji podkładów, wykonanego z cementu o różnej zawartości ekwiwalentu sodowego, od 0,33% do 1,5%. Stwierdzono, że ettringit jest trwały w 70°C, jeżeli zawartość Na2Oe rozpuszczalnego nie przekracza 0,50%. Opowiada to około 500 mmoli NaOH/l roztworu w porach betonu, a więc jest to więcej niż określił Wieker, jednak dla 75oC. Natomiast zawartość Na2Oe = 0,75% rozpuszczalnego w cemencie, gdy beton poddawany jest obróbce termicznej w 70°C, stanowi już zagrożenie opóźnionym powstawaniem ettringitu. Tak więc poziom Na2Oe = 0,6% całkowitego w cemencie zabezpiecza beton poddawany obróbce cieplnej przed opóźnionym powstawaniem ettringitu, natomiast Na2Oe = 0,8% w cemencie stwarza takie zagrożenie. Wynika stąd, że przyjmowanie w niektórych technologiach zawartości 0,80% całkowitego Na2Oe jest za wysokie i może spowodować powstawanie opóźnionego ettringitu. Trzeba równocześnie pamiętać, że kruszywa granitowe i bazaltowe dostarczają około 0,30 kg na 1 m3 betonu rozpuszczalnego Na2Oe.
EN
The sleepers from prestressed concrete are frequently damaged by delayed ettringite formation. The importance of this problem was the reason that the concrete, used in sleeper production, prepared from cement of different sodium equivalent content in the range from 0.33% to 1.2%, was tested. It was found that ettringite is stable at 70°C if the soluble Na2Oe does not exceed 0.50%. It is equal to about 500 mmol NaOH/I of pore solution in concrete, thus it is higher that Wieker establish, but for 75°C. However, the content in cement of soluble Na2Oe = 0,75% causes that ettringite is not stable in concrete heat treated at 70°C. Thus the content of total Na2Oe = 0.6% in cement is protecting heat treated concrete against the delayed ettringite formation, however, 0.8% of total Na2Oe in cement is causing this hazard. It should be also taking into account that the intake of soluble Na2Oe from granite and basalt aggregates is about 0.30 kg for one m3 of concrete.
6
Content available remote Zagrożenia korozyjne podkładów kolejowych, cz.1
PL
W pracy omówiono podstawowe przyczyny powstawania uszkodzeń podkładów strunobetonowych. Zwrócono uwagę, że przyczyną korozji wewnętrznej może być reakcja wodorotlenków sodu i potasu z krzemionką w kruszywie. Jednak głównym zagrożeniem betonu w przypadku jego obróbki cieplnej, jest opóźnione powstawanie ettringitu. Występuje ono w przypadku większej od 0,6% zawartości rozpuszczalnych alkaliów w cemencie, wyrażonych jako ekwiwalent sodowy Na2Oe. Należy podkreślić, że zawartość rozpuszczalnych w wodzie związków sodu i potasu jest mała w kruszywie, co powoduje wprowadzenie do betonu około 0,4 kg/m3 Na2Oe w przypadku stosowania granitu lub bazaltu. Ekspansja betonu i towarzyszące mu zniszczenie tego kompozytu, jest największe w przypadku wyższej od 70oC temperatury obróbki cieplnej oraz stosowania cementu o dużych wczesnych wytrzymałościach. Wniosek z przeglądu literatury jest taki, że oba te najbardziej prawdopodobne mechanizmy wewnętrznej korozji betonu, wymagają stosowania cementu o niższym od 0,6% ekwiwalencie sodowym Na2Oe.
EN
In the paper the basic causes of deterioration of concrete sleepers are discussed. One of the causes of concrete damage can be the alkali silica reaction. However, the main mechanism of concrete deterioration, in the case of it heat treatment, is the delayed ettringite formation. It can occur in the case of higher than 0.6% of Na2Oe content of total alkali present in cement, which assures the soluble alkalis content of about 0.4%. The content of soluble alkalis in aggregate is low and this component introduce to concrete about 0.4 kg/m3 of Na2Oe, in the case of usage of granite and basalt. The concrete expansion is the highest if the heat treatment is at temperature higher than 70°C, and the rapid hardening cement is applied. The conclusion of the literature analysis is that both internal corrosion of concrete need the usage of cement with the sodium equivalent lower than 0.6% of Na2Oe.
PL
Przedstawiono próby wykorzystania procesu tworzenia etryngitu do usuwania chromu(VI) ze ścieków przemysłowych. Syntezowano etryngity o określonych stosunkach molowych jonów CrO[4][^2-]- do SO[4][^2-]. Przebadano możliwości podstawienia jonów SO[4][^2-]- jonami CrO[4][^2]- oraz stabilność etryngitu chromianowego w zależności od pH roztworu.
EN
This article presents the process of ettringite formation to removal of chromium(VI) from liquid industrial wastes. There were synthesized the ettringites in specified mole ratio of Cr0[4][^2]- and SO[4][^2]- ions. The possibility of replacement of SO[4][^2]- ions by CrO[4][^2]- and the stability of Cr(VI)-ettringite in different pH - value of solutions were determined.
PL
Przedstawiono wyniki badań wpływu warunków dojrzewania na ekspansję zapraw o różnej zawartości siarczanów, z dodatkiem opalu, zgodnie z ASTM C227. Wykazano, że przemienne ogrzewanie zapraw w temperaturze 82°C i gwałtowne chłodzenie w wodzie w 20°C sprzyjają destrukcji próbek o dużej zawartości siarczanów, spowodowanej opóżnionym powstawaniem ettringitu. Całkowitą ekspansję zapraw powoduje również reakcja opalu z alkaliami, potwierdzoną obecnością uwodnionego żelu krzemianu potasowo-wapniowego w miejscach częściowo przereagowanych ziaren tego minerału. Dojrzewanie próbek w powietrzu w temperaturze 38°C i WW > 95% zwiększa ekspansję spowodowaną przemianą opalu w stosunku do metody Duggana, prawdopodobnie na skutek braku mikrorys w próbkach zaprawy. W tych warunkach nie występuje jednak opóżnione powstawanie ettringitu.
EN
The results of investigation of the curing condition effect upon the mortars expansion with different sulphates content and with opal addition, according to ASTM C227. It was shown that changeable heating of the mortars at 82°C and quick cooling in water at 20°C enhance of samples destruction with high sulphates content, caused by delayed ettringite formation. Overall mortars expansion is caused also by the opal reaction with alkalis, confirmed by the presence of hydrated potassium-calcium silicate gel surrounding partially reacted grains of this mineral. Curing of the samples in the air at 38°C and> 98 RH increased the expansion Iinked with opal reaction in comparison to Duggan method, probably because of the lack of microcracks in the mortar samples. In this condition the delayed ettringite formation did not occur.
9
Content available remote Opóźnienie powstawania ettringitu - krótki przegląd
PL
Opóźnione powstawanie ettringitu (OPE) powinno być odróżnione od wtórnego powstawania ettringitu. OPE obejmuje znane od dawna zjawisko cieplnego powstawania spękań. OPE nie występuje normalnie w przypadku dojrzewania betonu w pokojowej temperaturze. OPE można uniknąć jeżeli dojrzewanie betonu przeprowadza się w możliwie niskich temperaturach, nie przekraczających 60°C. OPE jest przeważnie formą wewnętrznej korozji siarczanowej, lecz czasem może być także spowodowane zewnętrzną agresją. OPE nazywa się często "słabą" korozją siarczanową. Jednak powstawanie pęknięć może umożliwić dostęp wilgoci i pociągnąć za sobą inne procesy korozyjne. Dobre zaprojektowanie i wykonanie konstrukcji ma podstawowe znaczenie w uniknięciu OPE, szczególnie w przypadku niskiego stosunku w/c. Potrzeba więcej badań w celu lepszego poznania tego zjawiska.
EN
Delayed ettringite formation (DEF) needs to be properly distinguished from secondary ettringite formation (SEF). DEF embraces thermal cracking that has been around for a long time. DEF does not normally occur in concrete cured at normal temperatures. Avoidance of DEF can be facilitated by keeping the curing temperatures as low as possible, below around 60°C. DEF is mostly internal sulphate attack, but sometimes there can be external attack too. DEF is often called a 'weak' form of sulphate attack. However, upon cracking, other deleterious phenomena can access the concrete within the cracks, especially with moisture transport. Good design and execution of the construction is essential for militating against DEF by lowering water/cement ratios as far as is practical. More research and development are needed to understand this phenomenon better.
10
Content available remote Naprężenia powstające w zaprawach z cementów ekspansywnych. Cz.2
PL
Zbadano rozszerzalność i naprężenia w zaprawach z cementu ekspansywnego wytwarzanego w oparciu o kompleks Kleina i glinian monowapniowy. Stwierdzono, że zwiększenie dodatku tych składników ekspansywnych zwiększa ekspansję i naprężenia powstające w zaprawach, jednak gdy równocześnie cement zawiera dodatek CaO. Bardzo duży wpływ na ekspansję i naprężenia powstające w zaprawach ma stosunek gips/dodatek ekspansywny. Zaprawy z cementów, w których ten stosunek odpowiada stechiometrii ettringitu ulegają rozpadowi w środowisku o dużej wilgotności, jednak mogą być stosowane do napraw uszkodzonych betonów lub wykonywania spoin w elementach pracujących w otoczeniu powietrza o małej wilgotności. W przypadku eksploatacji elementów betonowych w środowisku o dużej wilgotności ten stosunek powinien być mniejszy i nie przekraczać 70% wartości maksymalnej.
EN
The expansion and stresses in mortars of expansive cement produced from Klein complex and monocalcium aluminate were examined. It was found that higher content of these components increases expansion and stresses in mortars, but in case when cement contains the addition of CaO. Significant influence on expansion and stresses has the gypsum/expansion additive ratio. Mortars from cements in which this ratio is equal to ettringite stoichiometry are disintegrated in moist conditions. However, this cement can be used for concrete repairs and concrete elements production which will be exploitated in the air of normal humidity, of about 60% RH. In case of concrete elements used in high humidity environment this ratio can not exceed 70% of ettringite stoichiometry.
PL
Sporządzono zaczyny z dwóch cementów o bardzo różnej zawartości C3A, które poddano działaniu nasyconego roztworu NH4Cl. Zbadano stężenie jonów chlorkowych w próbkach zaczynów po różnym czasie działania NH4CI. Do badań zastosowano metodę ASTM C1218, polegającą na gotowaniu pokruszonych próbek zaczynu przez 5 minut w wodzie. Stwierdzono, że większe stężenie jonów Cl- występuje w próbkach z cementu o większej zawartości C3A. Równocześnie w tych samych próbkach była większa zawartość soli Friedla, czego można było oczekiwać. Trwałymi fazami w zaczynie zanurzonym w roztworze chlorku amonu był gips i prawdopodobnie amorficzny kwas krzemowy i wodorotlenki glinu i żelaza, niewykrywalne rentgenograficznie. Z faz klinkierowych występował brownmilleryt, który nie uległ hydratacji do 25 dnia.
EN
The pastes were produced from two Portland cement of very differentiated C3A content which was immersed in the saturated NH4CI solution. The concentration of Cl- ions in the paste samples were determined after different time of immersion. The ions concentration was measured using ASTM C1218 method, in which the crushed samples were boiled 5 min in water. Higher concentration of Cl- was found in the sample of the paste from cement richer in tricalcium aluminate. Simultaneously in the same samples the content of Friedel's salt was higher, which should be expected. The stable phases in the paste submitted to NH4CI action was gypsum and probably amorphous silica and aluminium as well as iron hydroxides, not detectable under X-ray examination. From clinker phases browmillerite remained till 25 days of immersion.
PL
Przedstawiono wyniki badania ekspansji zapraw przygotowanych z cementów o zwiększonej zawartości alkaliów i kruszyw reaktywnych z alkaliami. W badaniach zastosowano dwa cementy przemysłowe CEM l, różniące się zawartością alkaliów i glinianu trójwapniowego oraz dwa kruszywa, granit i piasek kwarcowy zawierający opal. Beleczki zapraw wykazywały ekspansję i spękania charakterystyczne dla przebiegu reakcji kruszywa z alkaliami. Obserwacje mikrostruktury metodą elektronowej mikroskopii skaningowej połączonej z analizą rentgenowską w mikroobszarze wykazały występowanie w zaprawach produktów reakcji krzemionki z alkaliami oraz ettringitu w rysach wokół ziaren kruszywa i w porach powietrznych.
EN
The paper presents expansion test results of mortars made from cements containing increased alkali and alkali-reactive aggregate. For test pur- poses, two CEM I industrial cements were used, which differed in alkali and tricalcium aluminate content, as well as two aggregates, granite and quartz sand containing opal. Mortar bars showed expansion and cracking typical for ASR. Observations of microstructure under SEM, combined with X-ray analysis, have shown the occurrence of the ASR products as well as ettringite in microcracks surrounding aggregate grains and air pores in mortars.
PL
Omówiono raport Grupy Ekspertów do spraw thaumasytu i przedyskutowano czynniki decydujące o zagrożeniu tym rodzajem korozji siarczanowej w przypadku budowli naziemnych jak i podziemnych. Przedstawiono wpływ dodatku do cementu popiołów lotnych i mielonego żużla granulowanego na zapobieganie korozji siarczanowej z utworzeniem thaumasytu. Także przedyskutowano najnowsze pozycje literaturowe omawiające badania w tym zakresie. Artykuł kończy się praktycznymi zaleceniami dotyczącymi korozji siarczanowej w warunkach zagrożonych powstawaniem thaumasytu.
EN
The report of Thaumasite Export Group is presented and the risk factors of thaumasite sulphate attack for under-ground as well as above ground constructions are discussed. The role of pfa and ggbs content in cement on combatting TSA is largely presented. Also recent studies which were published in technical literature are described. The paper ends with practical guidance concerning thaumasite sulphate attack.
14
Content available remote Reologia modelowych zaczynów cementowych z dodatkiem melaminy
PL
Zbadano właściwości reologiczne modelowych zaczynów cementowych złożonych z alitu z gipsem oraz alitu z C3A, lub C4A3S i gipsu: Dodatek C4A3S był tak dobrany, aby teoretyczna ilość powstającego ettringitu była taka sama, jak z dodatkiem C3A. Jako domieszkę stosowano sulfonowaną melaminę formaldehydową. Wykazano, że na reologię zaczynów duży wpływ ma ettringit i jego ilość. Natomiast, źródło jonów glinianowych (C3A lub C4A3S) nie ma znaczenia. Także szybko powstający żel C-S-H znacznie zmienia właściwości reologiczne zaczynu modelowego.
EN
The rheological properties of model cement paste composed of alite with gypsum, alite with C3A or C4A3S with gypsum were tested. The C4A3S content was so chosen that the theoretical quantity of ettringite formed was the same. As admixture sulphonated melamine formaldehyde was used. It was shown that the rheology of model cement pastes is strongly dependent of ettringite and its quantity. However, the source of aluminate ions (C3A, or C4A3S) has no influence. Also quickly C-S-H gel formation changes the rheology of model pastes.
16
Content available remote Synthesis of the ettringite containing chromium(III) and chromium(VI)
EN
A compound Ca6[Cr(OH)J2(CrO4)3(n-6)H2O was synthesised which has a structure of ettringite type and formula, where n is uncertain but probably at least 26 and possibly 32, as in ettringite. On being heated in air, it becomes amorphous at 323K and at higher temperatures gives CaCrO4 and CaO. It is probably a new compound, since no data was found about such a substance.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.