Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  eter etylo-tert-butylowy
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
W pracy dokonano analizy przyczyny zacierania elementów pompy wtryskowej zasilanej mieszaniną oleju napędowego i EETB. W wyniku przeprowadzonych analiz podejrzewano, że przyczyna zatarcia tkwi w obniżeniu jakości paliwa. Badania właściwości smarnych paliwa przeprowadzono w wykorzystaniem aparatu czterokulowego. W wyniku badań stwierdzono, że dodatek eteru etylotert-butylowego, w ilości 10% lub większej, zdecydowanie obniża właściwości smarne oleju napędowego (nawet o kilkadziesiąt procent), co było przyczyną zacierania elementów pompy wysokiego ciśnienia i rozdzielacza paliwa.
EN
The paper is directed at the determination of the cause of scuffing in an injection pump fuelled with the mixture of diesel fuel and ethyl tert-butyl ether (ETBE). Based on performed theoretical studies, it was suspected that the cause of scuffing was the decrease in lubricating properties of fuel. To check it, tribological tests were performed using a four-ball apparatus. Based on the performed tests it was stated that the addition of 10% of ethyl tert-butyl ether significantly decreases lubricating properties of the fuel (by several percent). It was the main reason for premature scuffing of the injection pump parts.
PL
W artykule przedstawiono wpływ dodatku eteru etylo tert-butylowego (EETB) do oleju napędowego (ON) na zmienność procesu przyspieszania wału korbowego silnika. Badania wykonano na 4-suwowym, 3-cylindrowym, chłodzonym cieczą, z bezpośrednim wtryskiem paliwa silniku diesla AD3.152. Silnik zasilano olejem napędowym i mieszaninami oleju napędowego z EETB w proporcjach objętościowych: 10:90, 20:80, 30:70 i 40:60. Pokazano, że nawet 40% dodatek objętościowy EETB do oleju napędowego nie ma znaczącego wpływu na zmienność procesu przyspieszania wału korbowego silnika. Sugeruje to, że proces spalania paliwa zachodzi prawidłowo bez zjawiska wypadania zapłonów powodowanego niską liczbą cetanową EETB.
EN
In this paper an impact of ethyl tert-butyl ether (ETBE) addition to diesel oil (DO) on variation of the engine crankshaft acceleration process has been presented. Our tests were performed on a 4-stroke, 3-cylinder,water-cooled, direct-injection AD3.152 diesel engine. The engine was fuelled with DO and with blends of DO with ETBE in volumetric ratio of 10:90, 20:80, 30:70 and 40:60. It was shown that even 40% by vol. of ETBE addition to diesel oil has not significant impact on variation of engine crankshaft acceleration process. It suggests that fuel combustion process occurs properly without a misfire phenomenon caused by low cetane num-ber of ETBE.
PL
W artykule przedstawiono wybrane parametry procesu spalania mieszanin eteru etylo-tert-butylowego (EETB) z olejem napędowym w silniku o zapłonie samoczynnym. Badania prowadzono metodą swobodnego rozpędzania silnika. Poddano analizie wpływ parametrów fizykochemicznych badanych paliw na obserwowane parametry procesu spalania.
EN
In the article shown the selected parameters of the combustion process of ethyl-tert-butyl ether (EETB) with diesel fuel mixtures in Diesel engine. Research conducted by the free engine run-up. Explores the impact of physico-chemical parameters of the tested fuels on combustion process parameters observed.
PL
W artykule zaprezentowano wyniki badań z zakresu oceny smarności mieszanin oleju napędowego (ON) z eterem etylo-tert-butylowym (EETB). Badaniu poddano mieszaniny, w których objętościowa zawartość EETB w ON wynosiła od 5 do 40%. Wykazano, że stosowanie 5% dodatku EETB do oleju napędowego nie miało negatywnego wpływu na zmianę smarności takiej mieszaniny. W przypadku pozostałych, badanych paliw obserwowano jednak pogorszenie ich smarności w zakresie 10-20%.
EN
In this paper, the results of lubricity evaluation of diesel fuel and ethyl tert-butyl ether (ETBE) mixtures are presented. Mixtures in which the concentration of ETBE in diesel fuel varied between 5 and 40% (V/V) were tested. It was demonstrated that the addition of 5% (V/V) of ETBE into diesel fuel did not have negative influence on the lubricity of such mixture. However, in the case of other tested fuel compositions, the reduction of their lubricity in the range of 10-20 % was observed.
EN
A method of determining equilibrium constants of catalytic reactions was described using gas chromatography. Both the equilibrium constants and enthalpies of methyl-tert-butyl ether from methanol and isobutene, ethyl-tert-butyl ether from ethanol and isobutene on catalyst Amberlyst 15 in the gas phase were determined. The enthalpy values of these reactions were compared with the enthalpies calculated from thermodynamic data and the experimental data given in the literature.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.