Wyniki wyszukiwania - BazTech

1

Experimental evaluation of eccentric mechanism power loading of movable pressure plate in die-cutting press

Knysh Oleh, Rehei Ivan, Kandiak Nazar, Ternytskyi Serhij, Ivaskiv Bohdan

Acta Mechanica et Automatica

|

2022

|

Vol. 16, no. 3

266--273

EN

The paper reports experimental research on torques during cardboard cutting in the die-cutting press with eccentrics in the drive of the movable pressure plate. To conduct the research, an experimental bench with eccentrics in the drive of the die-cutting press is designed and manufactured. The manufactured experimental device for the research on cardboard blanks provides the possibility of getting dependencies of loadings at different parameters of the die-cutting process. The experimental approach envisages the use of the strain gauge measurement method and the wireless module for data collecting, as well as the software for its processing, for getting trustworthy results with minimum faults. The method gives an opportunity to study the torque values during the cardboard-cutting efforts on the drive shaft. The paper shows changes in the torque value on the drive shaft during the kinematic cycle with and without the use of cardboard blank. The angle of the drive shaft rotation during the cutting process was evaluated at selected values of the cardboard thickness. The relationship between the linear cutting efforts and the cardboard thickness, its fibre direction, cutting rule type and rotational speed of the drive shaft is elaborated. This kind of data is approximated by a logarithmic function (logarithmic curve), at R2 from 0.90 to 0.98. The thickness of the cardboard significantly influences the value of the linear cutting effort at all the studied parameters.

2

Soveršensvovanie processa zagruzki transportnykh sredstv kormouorocnym kombajnom pri urobke trav na silos

Milev Aleksandr D., Otroshko Sergej A, Shevtsov Aleksey V., Kosolapov Vladimir M., Sharikov Nikolay D., Tseyko Vitaliy I., Romaniuk W.

Woda-Środowisko-Obszary Wiejskie

|

2019

|

T. 19, z. 3

15--24

EN

When harvesting plant mass by forage harvesters for haylage, maize of high ripeness for silage, etc., one of the tasks is to increase the efficiency of the use of vehicles by increasing the quantity of transported growing mass, which is achievable with proper compaction and uniform distribution of the vehicle bunker. This is facilitated by the use of an active visor with a return movement located on the silo line of the forage harvester. The results of theoretical studies on optimization of operation modes and improving the design of active visor are presented. The options for a smooth and continuous control of the working stroke of the active visor located on the silo line of forage harvester are developed. When harvesting vegetable mass with forage harvesters for haylage, corn of wax ripeness for silage, etc.one of the tasks is to increase the efficiency of using vehicles by increasing the amount of transported plant mass, which is achievable if it is properly compacted and evenly distributed over the vehicle body. This is facilitated by the use of an active visor, i.e. a visor with a return movement on the silo of the forage harvester. Theoretical studies on optimizing operating modes and improving the design of the active visor on the silo of the forage harvester were carried out in accordance with the provisions of classical mechanics. Four basic schemes for controlling the working stroke of the visor are structurally justified. The use of the proposed control concepts and active visor designs allows you to control the process of uniform and homogeneous loading of vehicles when harvesting grasses for silage by forage harvesters.

PL

Podczas zbioru kukurydzy na kiszonkę w stadium dojrzałości woskowej za pomocą sieczkarni do sianokiszonki jednym z zadań jest zwiększenie wydajności użytkowania pojazdów przez zwiększenie ilości transportowanej masy roślinnej. Można to osiągnąć w warunkach odpowiedniego zagęszczenia i równomiernego rozłożenia masy na nadwoziu pojazdu. Ułatwia to użycie elementów roboczych sieczkarni. Teoretyczne badania dotyczące optymalizacji trybów pracy i poprawy konstrukcji elementów roboczych sieczkarni przeprowadzono zgodnie z zasadami mechaniki klasycznej. Cztery podstawowe schematy kontroli udaru elementu roboczego są strukturalnie uzasadnione. Zastosowanie proponowanych obwodów sterowania i konstrukcji elementu roboczego pozwala kontrolować proces równomiernego ładowania pojazdów podczas zbioru masy roślinnej.

3

Unsteady MHD flow due to non-coaxial rotations of a porous disk and a fluid at infinity subjected to a periodic suction

Guria M.

International Journal of Applied Mechanics and Engineering

|

2018

|

Vol. 23, no. 3

623--633

EN

The unsteady flow of a viscous incompressible electrically conducting fluid due to non-coaxial rotations of a porous disk subjected to a periodic suction and the fluid at infinity in the presence of applied transverse magnetic field has been studied. The fluid at infinity passes through a fixed point. The velocity field, shear stresses are obtained in a closed form.

4

Unsteady flow through a porous medium due to noncoaxial rotations of a porous disk and a fluid at infinity subjected to a periodic suction

Guria M.

International Journal of Applied Mechanics and Engineering

|

2018

|

Vol. 23, no. 2

401--411

EN

The unsteady flow of a viscous incompressible fluid due to non-coaxial rotations of a porous disk and a fluid at infinity subjected to a periodic suction through a porous medium has been studied. The velocity field, shear stresses are obtained in closed form. The variations of primary and secondary velocities for different values of non dimensional parameters are depicted in figures.