Wyniki wyszukiwania - BazTech

1

CETEG 2018 - 16th Meeting of the Central European Tectonic Groups (Rytro, Poland, 18–21 April 2018) - abstracts

Tomaszczyk M. [ed.], Głuszyński A. [ed.], Sikora R. [ed.]

Geology, Geophysics and Environment

|

2018

|

Vol. 44, no. 1

145--202

2

Efficiency of drilling large diameter wells with cutter bits on Szczerców opencast

Macuda J.

AGH Drilling, Oil, Gas

|

2015

|

Vol. 32, no. 2

405--413

EN

Drilling of large diameter wells to be used for dewatering of lignite deposits is inefficient due to the presence of large packages of loose Quaternary and Tertiary strata. Moreover, considerable dewatering of the rock mass favors serious complications and drilling break-downs connected with the sliding of wellbore walls. Accordingly, new technical and technological solutions, which enable faster drilling, are searched for. In this way the time of operation of drilling mud on the near-wellbore zone can be shortened and the safety of drilling works increased. For the sake of obtaining higher rates of drilling in large diameter dewatering wellbores a new cutter bit 0.96 m of diameter was designed. Drillability tests in industrial conditions followed. These tests were performed in separated, loose and low-compaction, macroscopically homogeneous rocks of similar drillability. The tests were performed on selected sections 0.3 to 1.0 m long, and each of the sections was drilled at constant rotational velocity and weight on bit. Prior to these tests there were established limitations regarding weight on bit and rotational velocity of the bit, in reference to the technical characteristic of the rig, strength of the string and the cutter bit. Two different regression models were considered to find a dependence of mechanical drilling rate on weight on bit and rotational velocity of the bit for selected macroscopically homogeneous strata. The most favorable results were obtained for a power model representing impact of axial stress and rotational velocity of the bit on the drilling rate. They have been confirmed by calculated regression coefficients and statistical parameters. Industrial tests were performed to assess the efficiency of drilling large diameter dewatering wells with a cutter bit of 0.96 m diameter on the basis of the presented model of average drilling rate. The results for the average drilling rate turned out to be much higher than the ones obtained so far.

3

Próba wyznaczenia modelu wiercenia narzędziami PDC na przykładzie wiercenia w wybranych strukturach geologicznych

Rado R., Lubaś J.

Wiertnictwo, Nafta, Gaz

|

2007

|

T. 24, z. 1

425-433

PL

Narzędzia PDC odznaczają się wysokimi postępami wiercenia i osiąganymi przewiertami. Stosowanie tych narzędzi jest efektywne i przyczynia się do zwiększania prędkości wiercenia, a co za tym idzie, obniżenia kosztów wiercenia. Właściwe wyznaczenie optymalnych parametrów technologii wiercenia jest związane z procesem optymalizacji. Aby przeprowadzić taki proces, niezbędne jest zidentyfikowanie matematycznego modelu wiercenia danym narzędziami w odpowiednim interwale geologicznym. Artykuł prezentuje wyznaczenie matematycznego modelu wiercenia narzędziami PDC dla zapadliska przedkarpackiego.

EN

PDC tools have high drilling advancement and footage. These tools are efficient and accelerate the drilling rate, thus lowering the cost of drilling. Proper determining of optimal parameters of drilling technology is related with the optimization process. For doing so, it is necessary to identify a mathematical model of drilling with given tools in a respective geologic interval. The mathematical model of drilling with PDC tools for the Carpathian Foredeep is presented in the paper.