Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 14

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  dodatki mineralne
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The chosen plan for our case study is a network mixture design consisting of 21 mixtures. The application of this method has proven to be immensely useful in studying the influence of composition parameters (composite design) and the utilization of various types of mineral additives (mixture design). The application of the Design of Experiments (DOE) method, based on a statistical approach, allowed for a better understanding of the effect of formulation parameters, including the proportion of alluvial sand (75%), dune sand (25%), the total amount of sand kept at constant percentages, the dosages of brick powder, limestone filler and ceramic powder (all varying from 0 %, 20 %, 40 %, 60 %, 80 %, and 100 %), while keeping the dosage of superplasticizer and the water/binder ratio constant. This approach helped to understand the interactions between these parameters and their impact on the process. Mathematical models relating the variations of these parameters to the workability and compressive strength of such concrete mixtures have been established. The results obtained show that the workability of SCSC (expressed by slump flow and V-funnel flow) improves with the increase in the dosage of limestone filler (FC), brick powder (PB), and ceramic powder (PC), with element having a different impact, be it alone or in a combination. Moreover, they all improved the behavior of SCSC in both the fresh and hardened states. The experiment shows that increasing the proportions of FC and PC in the mixture, whether linear, binary, or ternary, leads to a significant improvement in compressive strength. Furthermore, better strength is observed in the ternary mixture at 28 days, with a strength of 43 MPa, with the following proportions (FC 70%, PB 20%, PC 10%). Finally, the result at 180 days of 48 MPa confirms the following proportions (PC 60 %, FC 30 %, PB 10 %) The compliance of some SCSC compositions was tested according to the recommendations of the French Association of Civil Engineering.
EN
The operational dams in Algeria lose 32 million m 3 of water storage capacity each year, and fifteen of these dams are threatened by siltation. This investigation forms a component of a management strategy for dredged silt in the Gargar Dam, the third-largest dam in Algeria with considerable sedimentation. This paper comprises two main axes: a detailed experimental study based on the studied dam mud's physico-chemical, rheological, and mechanical analysis. The second part is based on the study of the valorization of Gargar mud to be acceptable for use in road civil engineering. In order to obtain this goal, the Gargar mud was treated with lime (0-6%), sand (20%), and natural pozzolana (20%). Test results show that the properties of Gargar mud are significantly improved after treatment, and the soil becomes more friable and more resistant; it can therefore be used as a foundation layer in road civil engineering.
PL
Artykuł przedstawia badania wpływu stosowania cementów z dodatkami mineralnymi CEM II/A-V 42,5 R, CEM II/B-S 42,5 N i CEM III/A 42,5 N na dystrybucję porów w mieszance betonowej przeznaczonej na górną warstwę nawierzchni betonowej zaprojektowanej na agresję środowiska XF4. Przeanalizowano zmiany charakterystyki porów w betonie od wykonania do wbudowania. Próbki pobrano bezpośrednio po wykonaniu mieszanki, po godzinie bezruchu i po wysokoenergetycznym mieszaniu po godzinie bezruchu. Określono charakterystykę porów, właściwości mieszanki betonowej oraz właściwości mechaniczne stwardniałego betonu. Przeanalizowano tendencje zmian całkowitej zawartości powietrza oraz zawartości mikroporów w betonie, wynikające z zastosowania cementu z dodatkami mineralnymi. Uzyskane wyniki świadczą o kompatybilności układu domieszek napowietrzającej i uplastyczniającej z użytymi rodzajami cementu.
EN
The article presents a study on the infl uence of the use of cements with mineral additives CEM II/A-V 42,5 R, CEM II/B-S 42,5 N i CEM III/A 42,5 N on the distribution of pores in a concrete mix intended for the top layer of a concrete pavement designed for the exposure class XF4. The changes in the pore characteristics in concrete from its production to its placement are analysed.
PL
W artykule przedstawiono wyniki badań przeprowadzonych w celu sprawdzenia, jaki wpływ na właściwości betonów o matrycy cementowej będzie miało zastosowanie stosu okruchowego skomponowanego z kruszyw odpadowych, w połączeniu ze spoiwem cementowym modyfikowanym dodatkami mineralnymi.
EN
The article presents the results of tests carried out in order to check the effect of the use of a crumb pile composed of waste aggregates in combination with a cement binder modified with mineral additives on the properties of cement-matrix concretes.
PL
W pracy dokonano na drodze badawczej oceny wpływu wybranych kwarcowych dodatków mineralnych modyfikujących beton warstwy wierzchniej na jego zespolenie z podkładem betonowym. Dodatkami tymi były mączka kwarcowa oraz skaleniowo-kwarcowa stosowane w różnej ilości w stosunku do masy cementu. Badania zespolenia warstw wykonane metodą pull-off wykazały, że mączka skaleniowo- kwarcowa wpływa zdecydowanie niekorzystnie na to zespolenie.
EN
Based on performed research in this paper the evaluation of the effect of selected quartz mineral admixtures applied in added concrete on their adhesion to concrete substrate was presented. These admixtures were quartz and feldspar-quartz mineral used in varying amounts relative to the weight of cement. Research performed by pull-off method presents that feldspar-quartz mineral powder definitely affects adversely on that adhesion.
PL
W artykule poddano analizie kształtowanie mrozoodporności betonów w obecności dodatków mineralnych i domieszek napowietrzających.
EN
The article describes the main statements of the PN-EN 206-1 standard concerning concrete frost resistance. Particular attention was paid to proper concrete aeration, especially in the presence of mineral additives. The introduction of air-entraining admixtures to a concrete mixture with the high amounts of cements and additives does not guarantee the proper concrete aeration in its hardened state; a decrease of the total volume of air and the corruption of the air void system can be observed. In such a case, polymer microspheres can be applied instead of liquid admixtures.
EN
This work presents the research results of effectiveness of superplasticizer based on polycarboxylate in cement pastes with different cements (CEM I, CEM II, CEM III and CEM V). It has been shown that in the initial period, up to 15 minutes, the EP admixture has greater effectiveness in cement pastes with Portland cement CEM I (regardless of its amountfrom 0.5 to 2% wt.) than in pastes containing mineral additives. However, as time goes by (up to 60 minutes), the effectiveness of EP admixture in cement pastes containing cement with mineral additives (blast furnace slags in CEM II/B-S 32,5 R, CEM III/A32,5 N and slags with fly ashes in CEM V/A-S-V 32,5 R) is greater than for cement pastes containing cement without additives (CEM I 42,5 R), what allows top reserve their fluidity for longer.
PL
W niniejszej części artykułu omówiono czynniki techniczno-technologiczne, ekonomiczne i ekologiczne powiązane z rozwojem produkcji cementów z dodatkami mineralnymi. Podkreślając znaczenie jakie może mieć w rozwoju produkcji cementów z dodatkami mineralnymi wprowadzenie ustawy w zakresie emisji gazów cieplarnianych i podatku z tytułu emisji dwutlenku węgla do atmosfery.
PL
W artykule omówiono zagadnienia związane z rozwojem produkcji cementów z dodatkami. Przedstawiono zmiany asortymentowe z uwzględnieniem wzrostu udziału dodatków mineralnych w cemencie dla przemysłu krajowego i krajów CEMBUREAU. Nowelizacja norm cementowych i ustanowienie zharmonizowanych, regionalnych norm europejskich zmieniło zasadniczo zasady klasyfikacji i wymagania dla cementu. Podstawowa norma przedmiotowa PN-EN 197-1 dla cementów powszechnego użytku, stanowiących ok. 98 % produkcji krajowej, wprowadziła duże zróżnicowanie rodzajów i klas cementów. Podstawą klasyfikacji jest tu ilość i rodzaj dodatków mineralnych w cemencie, co podano w tabeli 1. Podkreślono w niej znaczenie cementów wieloskładnikowych z dużą ilością dodatków mineralnych.
PL
W produkcji betonu coraz częściej stosowane są dodatki mineralne. Są to najczęściej popioły lotne, pyl krzemionkowy oraz mielony żużel wielkopiecowy. Składniki te muszą spełniać wymagania określone w obowiązujących normach lub przygotowywanych projektach norm, a podstawowe ich zasady doboru do składu betonu podane są w obowiązującej normie na beton PN-EiN 206-1. Wprowadzenie do składu betonu dodatków mineralnych powoduje modyfikację właściwości, zarówno świeżej mieszanki betonowej jak i stwardniałego betonu. Powyższe problemy omówiono w niniejszej pracy.
EN
In concrete production technology mineral additives are more and more often used. These are most frequently fly ashes, silica fume and ground granulated blastfurnace slag. This concrete components must meet standard requirements or prepared standard projects, and their basic rules of concrete use have to in current concrete PN-EN 206-1 standard. Introduction of mineral additives to concrete causes concrete properties modification, both fresh and hardened concrete. Above mentioned problems have been discussed.
EN
The use of secondary materials as active mineral additives in cement production allows to making binders, which have many advantages and have been introduced to various concrete technologies. Constructions and elements where cements with fly ash or slag have been used are durable in spite of working in difficult environmental conditions. Additionally the use of cements with mineral additives do not only allows to achieving planned technical effects, but also brings to investors the positive economical effect. Production of cements with mineral additives has also the rational ecological aspects. Using the cements with mineral additives on a wide scale we are contributing to the process of efficient use of natural raw materials deposits reducing the energy use (saving the natural fuels deposits) and the emission of gases into atmosphere (especially CO2) as well as decreasing areas needed to industrial wastes storing.
PL
Stosowanie odpadów przemysłowych (popioły lotne, granulowany żużel wielkopiecowy) jako aktywnych dodatków mineralnych do produkcji cementu na otrzymanie materiałów wiążących o właściwościach pożądanych przez przemysł materiałów budowlanych t budownictwo. Konstrukcje i elementy budowlane wykonane z cementów portlandzkich popiołowych lub cementów hutniczych zachowują trwałość w trudnych warunkach środowiskowych (oczyszczalnie ścieków, budownictwo morskie, roboty górnicze). Co więcej, użycie cementów z dodatkami mineralnymi nie tylko pozwala osiągnąć zamierzone wyniki techniczne i technologiczne, lecz przynosi również inwestorom efekt ekonomiczny. Produkcja cementów z dodatkami mineralnymi poparta jest również racjonalnymi, ekologicznymi aspektami. Produkując i stosując cementy z dodatkami mineralnymi przyczyniamy do zachowania złóż naturalnych surowców i paliw potrzebnych do wytworzenia klinkieru portlandzkiego, jak również do ograniczamy obszary Ziemi wykorzystywane na składowanie odpadów przemysłowych.
PL
W referacie omówiono niektóre aspekty odporności na korozje betonu wykonanego z cementu zawierającego dodatki mineralne (popiół lotny, granulowany żużel wielkopiecowy, kamień wapienny).
EN
In this work some aspects of resistance to corrosion has been discussed, relating to concrete made of cement with mineral admixtures (fly ashes, granulated black furnace slag, lime stone).
PL
Na podstawie danych literaturowych i badań własnych omówiono podstawowe właściwości popiołów lotnych, pyłów krzemionkowych oraz superplastyfikatorów z uwzględnieniem ich roli w modyfikowaniu struktury zaczynów cementowych i w kształtowaniu strefy kontaktowej na granicy zaczyn-kruszywo. Przedstawiono wpływ wymienionych dodatków i domieszek na przebieg hydracji zaczynów oraz na wytrzymałość zapraw cementowych.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.