To avoid damaging of tilting pad journal bearings, the problem of safety shut down of high speed air blower cantilever rotor becoming important in modern industry. The experimental testing, modeling and simulation of dynamic behavior of rotating system was run to directly evaluate gyroscopic negative effect damaging journal bearings. A dynamic model of air blower rotating system was designed and simulated. A simulation and experimental measurement results of rotating system were used to optimize the shut down regime of machine. Gyroscopic effect influences of rotor bearing stability are confirmed. Results of numerical simulation confirm results of experimental vibration measuring. The theoretical research results are given and conclusions are made. Experimental testing and simulations results was applied to typical air blower rotating systems for elimination of huge negative forces acting on new bearings during shut down of the machine.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Poniżej przedstawiono drugą część artykułu stanowiącego omówienie pracy polegającej na sprawdzeniu możliwości zastosowania programu TASCflow do obliczeń sprawdzających sprężarek promieniowych. Część ta dotyczy identyfikacji zjawisk, które mogę wystąpić zarówno w warunkach pracy niestatecznej jak i statecznej. Wyjątkiem jest oderwanie w kanale międzyłopatkowym wirnika identyfikowane raczej z niestabilną pracą maszyny. Przedstawiono również porównanie wyników obliczeń z eksperymentem zarówno ciśnienia na wylocie z dyfuzora jak i rozkładu ciśnień statycznych wzdłuż ściany tylnej dyfuzora i na zewnętrznym obrzeżu wirnika.
EN
The second part of the paper reported the work consisted in the radial compressor checking calculations made by using the TASCflow program. In this part are identified the phenomena responsible as for the unstable as well for the stable working conditions. The separation zone in the rotor channel is only exception. The results of calculations comparison with the experiment is presented as well. In that part, the static pressure distribution along the rotor outer edge and along the back diffuser wall are recognized.
3
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Artykuł jest omówieniem pracy polegającej na sprawdzeniu możliwości zastosowania programu TASCflow do obliczeń sprawdzających sprężarek promieniowych. Analizie poddano jednostopniową dmuchawę powietrzną, skonstruowaną i wykonaną w IMP PŁ w ramach programu rządowego. Maszynę wybrano przede wszystkim ze względu na dostępność szeroko przeprowadzonych badań eksperymentalnych na stoisku pomiarowym, ulokowanym w IMP PŁ (charakterystyki maszyny i badania w warunkach pracy niestatecznej). W tej części artykułu skupiono się na identyfikacji i analizie zjawisk odpowiedzialnych za niestateczną pracę sprężarki.
EN
A paper reports the work consists in the radial compressor checking calculations made by using the TASCflow program. The one stage air blower designed and made in the Institute of Turbomachinery (within the government agenda) is analysed. The machine was chosen due to the access possibility to the results of wide conducted experiments (stand located in the Institute of Turbomachinery). An experiments concern not only on the global performance measurements but on the non stationary flow measurements as well. This part of paper is devoted to identity and analysis of the phenomena responsible for the unstable compressor work.