Wyniki wyszukiwania - BazTech

1

Badanie procesu nagrzewania płyt grzewczych pras wulkanizacyjnych

Rzeszowska Aleksandra, Błażej Ryszard, Jurdziak Leszek, Kirjanów-Błażej Agata

Kruszywa : produkcja - transport - zastosowanie

|

2024

|

Nr 1

40--48

PL

Artykuł poświęcony jest badaniu i analizie zmian rozkładu temperatur na płytach grzewczych prasy wulkanizacyjnej podczas procesu ich nagrzewania. Pomiary zrealizowano z wykorzystaniem kamery termowizyjnej. Utrzymanie stałej temperatury na całej powierzchni płyt grzewczych w trakcie wulkanizacji połączeń taśm przenośnikowych jest istotne dla jakości i trwałości połączeń.

EN

The article presents a study and analysis of changes in temperature distribution on the heating plates of a vulcanizing press during the heating process. The measurements were carried out using a thermal imaging camera. Maintaining constant temperature on the entire surface of heating plates during the vulcanization of conveyor belt connections is important for their quality and durability.

2

Assessment of the feasibility of determining the volume fraction and characteristics of the size, shape and distribution of γ’ phase precipitates in nickel-based superalloys

Szczotok Agnieszka

Technical Transactions

|

2023

|

Vol. 120, iss. 1

art. no. e2023011

EN

This overview presents a comprehensive exploration of the research methodsemployed for the precise assessment of volume fraction and the detailedcharacterisation of the size, shape and distribution of γ' phase precipitates withinNi-based superalloys. These advanced materials exhibit exceptional mechanicalproperties due to the presence of γ' precipitates. The accurate quantification ofprecipitate parameters is crucial for understanding material behaviour and forthe optimisation of alloy design. In this overview, a spectrum of techniques,including microscopy (SEM, TEM), diffraction (XRD), spectroscopy (EDS, EELS)and advanced imaging (3D-APT, STEM-HAADF, FIB-SEM) is discussed. Strengths,limitations and potential synergies among these methods are highlighted, offeringresearchers a comprehensive toolbox to advance their investigations of γ' phaseprecipitates in Ni-based superalloys.

3

Spatial Dynamics of Microplastic Pollution in Water and Sediments of the Ciliwung River along with Conditions of Water Quality Field Parameters and Population Density

Mahendra Alloysius Pamurda Dhika, Pratama Mochamad Adhiraga, Moersidik Setyo Sarwanto, Rahmawati Suphia, Iresha Fajri Mulya

Journal of Ecological Engineering

|

2023

|

Vol. 24, nr 8

296--309

EN

Microplastics are emerging contaminants that degrade from textile plastic products, petroleum, and cosmetic equipment with sizes less than 5 mm. There are more than 70,000 settlements located along the Ciliwung River in DKI Jakarta that use the river water as a source of clean water. The most common type of waste found in the Ciliwung River to date is plastic waste, which can cause flooding and other disasters. The Ciliwung River can currently be found with microplastic pollution which has an impact on exposure to living things in the river, such as in case studies in the Ciliwung River estuary area. The problem is the exposure to 75% of blue panchax fish (Aplocheilus sp.) as many as 1.97 particles per fish with sizes of 300 to 500 μm. This research will focus on analyzing the dynamics of microplastic quantity in water and sediment of the Ciliwung River along with the correlation between field parameters and population density around the banks of the Ciliwung River. When viewed from the seven points that represent the Ciliwung River downstream to upstream in DKI Jakarta Province, the number of microplastics is in the range of 320–741 particles/L. For the dominating form, it can be analyzed that the majority of microplastic forms are fragments (97%), followed by fibers (2.9%) and pellets (0.1%). While in the sediment, the number of microplastics in the Ciliwung River sediment is in the range of 6560–10630 particles/kg. The population density factor has the highest correlation to the number of microplastics with a value of r = 0.702. This is associated between population density and high microplastic emission loads.

4

Distribution of Microplastics in Domestic Wastewater and Microplastics Removal Potential in Wastewater Treatment Plants

Fauzi Mhd., Darnas Yeggi, Muna Cut Rauzatun, Nizar Muhammad

Journal of Ecological Engineering

|

2023

|

Vol. 24, nr 12

79--86

EN

Microplastics in domestic wastewater are detrimental to living organisms and appear in a variety of sizes, colors, and shapes. The purpose of this study is to examine the distribution of microplastics in domestic wastewater, as well as the possibility for microplastic removal in wastewater treatment plants (WWTP). The sampling method used is SNI 6989.59:2008 concerning Wastewater Sampling Methods that Apply in Indonesia. To remove organic compounds in the sample, 0.05 M Fe (II) and 30% H2O2 solution were added by the digestion process at 75 °C for 30 minutes and cooled. Samples were filtered using Whattman GF/C filter paper with the help of a vacuum pump and dried. To identify the concentration, shape, size, color of microplastics, visual analysis was used with the help of a microscope using the zig-zag technique. The concentration of microplastics in domestic wastewater in Gampong Garot is 30.17 ± 0.75 particles/100 mL sample. The most commonly found microplastic size is 1,001–5,000 μm, while the dominant color is transparent. The forms of microplastic found in the samples were fiber, fragments and microbeads with a percentage of 65.20%, 23.16% and 11.64%, respectively. These microplastics come from local community activities such as washing clothes, bathing, washing dishes, and other activities. So, it is necessary to treat domestic wastewater using WWTP. Not only does it remove organic matter and nutrients, WWTP also has the potential of microplastics removal around 7–99% depending on the processing unit.

5

Managing the distribution process with an example of the FMCG market

Kabus Judyta

Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska

|

2022

|

z. 160

275--286

EN

Purpose: The purpose of this article is to present the problems and challenges faced by organisation of distribution logistics with a selected example. Comparing the company to the competition and focusing on the problems and challenges faced by the studied enterprise on the market of fast-moving consumer goods. Design/methodology/approach: The subject of the study is the evaluation of distribution channels of the selected enterprise through the analytical and point method. Findings: The obtained results, thanks to the use of the analytical-point method and the efficiency index of distribution channels, indicate that for the surveyed enterprise, Eurocash distribution channels are not sufficiently effective. The indicator of distribution costs in sales compared to the competition is the highest. Several factors had an impact on such results. Research limitations/implications: However, the issues presented in the paper regarding the problems and challenges of distribution organization cannot be considered as exhaustive, because the discussed topics constitute a multifaceted and interdisciplinary research area. The study would be more complete if the management of distribution logistics on the FMCG market were presented based on the changes caused by the Sars-Cov-19 pandemic. Practical implications: The conducted research draws attention to the effectiveness of distribution channels on the FMCG market. The article may be useful for enterprises providing services in this business sector. Social implications: The article shows the importance of making decisions in the area of distribution processes that significantly affect the entire supply chain, and thus customer service. The use of optimal distribution channels affects the efficiency of logistics services, contributing to an improvement in the quality of service provided to the final recipient and the competitiveness of the company on the FMCG market. Originality/value: The work is addressed to entrepreneurs operating in the FMCG industry. As well as all those interested in the subject of logistics, management and distribution on the market of fast-moving consumer goods.

6

Choosing a supplier of fuels and energy in large-format retail enterprises

Jedynak Zdzisław

Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska

|

2022

|

z. 158

243--255

EN

Purpose: The overriding goal of the considerations is to indicate the assumptions and rule for the implementation of the procedure leading to the appointment of an appropriate fuel and energy supplier in large-format enterprises (L-FE), to the extent necessary to improve economic results. The choice will take into account both the size and structure of the resources that are at the disposal of the enterprise and the environmental conditions. The practical goal will be to develop a concept for the implementation of the procedure for the evaluation and selection of a supplier of energy carriers for the needs of a commercial entity. Design/methodology/approach: The research procedure will run through the following stages: 1. Presentation of the theoretical foundations by discussing concepts related to the functioning of the fuel and energy economy as well as indicating the methods and criteria for selecting a supplier. The research method used will be a review of the literature on the subject. 2. Recognition of the L-FE decision situation through the analysis of the subjective, objective and process structure. The research method used will be direct observation with participation. The observation will be carried out in four commercial networks (in total seven enterprises). 3. Setting the assumptions for the implementation of the procedure for the evaluation and selection of the supplier of energy carriers in L-FE. At this stage, the purpose of the procedure, its essence, stages and tasks of implementation as well as the procedure will be indicated. Responsible persons and contractors will be appointed. The evaluation criteria as well as the applicable entry and exit documents will be proposed. The research method used will be the expert method. Findings: The added value of the article is the answer to the question: how is the process of assessing and selecting the supplier of energy carriers in L-FE? The work indicates its goal, stages and tasks of implementation, applicable documents, methods of proceeding and evaluation criteria. The proposed solution contains practical guidelines. Should be noted that the adopted scheme of conduct and the method of its application in a trading enterprise creates the possibility of transferring the developed solutions to other economic systems. Originality/value: In this article, the actions taken have been focused on areas that have and will have an impact on reducing the costs of the company's operation and, consequently, on improving their competitive position on the market.

7

Punkty widokowe jako dystrybutory kulturowych usług ekosystemowych. Studium przypadku Kazimierza Dolnego nad Wisłą

Michalik-Śnieżek Malwina, Lipińska Halina, Kułak Agnieszka, Wyłupek Teresa

Prace Komisji Krajobrazu Kulturowego

|

2022

|

nr 47 (1)

21--39

PL

Kulturowe usługi ekosystemowe (ang. CES- Cultural Ecosystem Services), to usługi świadczone przez ekosystemy i krajobrazy, które cechują się wartościami niematerialnymi. Usługi te nie byłyby „konsumowane”, gdyby w przestrzeni nie funkcjonowały obiekty przekazujące te usługi od producentów (ekosystemów, krajobrazów) do odbiorców (człowieka). Takimi dystrybutorami CES są punkty widokowe. Celem pracy jest określenie klas CES podlegających dystrybucji za pośrednictwem punktów widokowych oraz wskazanie klas cieszących się największym zainteresowaniem wśród odbiorców. Badania prowadzono na terenie miasta Kazimierz Dolny. Wyniki pokazują, że badane punkty widokowe mają w swojej ofercie szeroki wachlarz CES, jednak popyt na te usługi jest znaczenie węższy i uzależniony od położenia i promocji punktu. Wyniki pokazały także, że płatne punkty widokowe charakteryzują się podobnie szeroką ofertą CES jak punkty bezpłatne.

EN

Cultural Ecosystem Services (CES) refer to services provided by ecosystems and landscapes that have non-material values. These services would not be „consumed” if there were no objects in the environment that transmit these services from produ-cers (ecosystems, landscapes) to recipients (humans). Such distributors of CES are viewpoints. The purpose of this work is to determine the classes of CES that are provided through viewpoints and to indicate the classes that are most popular among recipients. The research was conducted in the town of Kazimierz Dolny. The results show that the viewpoints in the study area offer a broad range of CES, but the demand for these services is much smaller and depends on the location and promotion of the viewpoint. The results also showed that pay-to-enter viewpoints have a similarly broad CES offer as those that are free of charge.

8

Nowe stanowiska jemioły pospolitej jodłowej Viscum album L. subsp. abietis (WIESB.) JANCH. na Pogórzu Śląskim i w północnej części Beskidu Śląskiego

Beczała Tomasz, Jonderko Tomasz, Chmura Damian

Polish Journal of Materials and Environmental Engineering

|

2022

|

Vol. 3 (23)

21--27

EN

The semiparasitic plant common fir mistletoe Viscum album L. subsp. abietis (WIESB.) JANCH is the rarest of three subspecies in Poland. In the country this mistletoe has northern border of distribution range. The previous literature data suggested that the subspecies has only few localities in the Silesian Foothils and in northern part of the Silesian Beskid Mts (southern Poland) and in addition, some of them were not confirmed. Mistletoe Viscum album subsp. abietis has been reported to increase its range and abundance in Europe recently therefore authors decided to update the distribution data of the subspecies the aforementioned area. The data about distribution of host tree silver fir Picea abies was taken from forest database and from personal communication with foresters. The area was search to find localities of the individuals on trees. In case of the single specimens on fir trees binoculars were used. In total 39 localities were given including more than 30 new localities when compared to literature data from 20th century. In Silesian Foothils there are 20 localities and 19 stands in the Silesian Beskid Mts. On the localities the abundance of individuals ranged from single plants on one tree to massive infestation of several dozen of fir trees. The common fir mistletoe distribution seems to be an underestimated in the southern part of the Silesian Voivodeship, it is highly probable that its next localities will be found in nearest future. Despite the category endangered “EN” in the Red Book of Plants of the Silesian Voivodship the species is not threatened anymore. On the contrary it becomes to pose a serious threat to silver fir because it can contribute to decline of trees. During the massive infestation of firs by mistletoe, fir trees often die gradually. The obtained new information will allow for a better recognition of the current species distribution and a possible revision of the threat category of common fir mistletoe in the territory of Silesian Voivodeship. For a more detailed analysis of the degree of expansion of this species, it would be advisable to examine the number of individuals and study the development of mistletoe over time on the host on randomly selected trees.

9

Simulation of Favorable Habitats for Non-Gregarious Locust Pests in North Kazakhstan Based on Satellite Data for Preventive Measures

Baibussenov Kurmet, Bekbayeva Aigul, Azhbenov Valery

Journal of Ecological Engineering

|

2022

|

Vol. 23, nr 7

299--311

EN

The paper considers the approaches and possibilities of using two types of simulation: the species distribution model and the ecological niche model. The study aimed to simulate favorable habitats and the potential spread of non-gregarious locust pests in North Kazakhstan based on satellite and ground data for preventive measures. The MaxEnt software was used to conduct the simulation. According to the species distribution model, high indicators of the habitat are predicted in the Pavlodar and Kostanay regions, on 69.9–100% of the studied territory. With the simulation of ecological niches for non-gregarious locust pests, the following class boundaries were determined for the transition from quantitative to qualitative indicators from I (85–100%) to IV (0–50%), which indicates the zones of the probability of pest attack from a higher indicator to a lower one. According to the fundamental model, high indicators of the area of pest occurrence, that is, zones I and II, are located in the central and northern parts of the Pavlodar region. Here, the probability of non-gregarious locust occurrence of zone I and II with a ratio of 1:1 is observed in a slightly arid, moderately warm agro-climatic zone. In the southern part of the Kostanay region, the simulation predicts the probability of occurrence on zones I and II with a ratio of 1:2 in the moderately arid warm agro-climatic zone of this region. In the southern and southeastern parts of the Akmola region, the model predicts the probability of occurrence in zones I and II with a ratio of 1:3 in a slightly humid, moderately warm agro-climatic zone of the region. The considered species distribution model can be used as a modern tool for long-term forecasting of the spread of non-gregarious locust pests since it takes into account the peculiarities of the agricultural landscape. The fundamental niche model can be used in a long-term population forecast since it focuses more on the theoretical conditions of pest habitats.

10

Assessment of Heavy Metal Pollution in the Surface Water of the Doi-Cho Dem-Ben Luc Rivers, Vietnam

Thieu Van Vu Duc, Dinh Thi Thu Huong, Nguyen Thi Truc Thao, Nguyen Thuy Lan Chi, Nguyen Binh An, Pham Anh-Duc

Inżynieria Mineralna

|

2022

|

no. 2

85--90

EN

Heavy metals are a pressing concern in terms of their pollution in aquatic ecosystems because of their persistence, environmental toxicity, bioaccumulation. Aquatic environments receive heavy metals in untreated or inadequately treated wastewater from domestic, industrial, agricultural, and navigation sources. The Doi-Cho Dem-Ben Luc Rivers play the key roles of irrigation, navigation and ecological restoration. It is crucial to ascertain the pollution status, influencing factors, ecological risks, and possible sources of heavy metals in the surface water of the Doi-Cho Dem-Ben Luc Rivers. In this study, surface water from 7 sampling sites over was collected from the Doi-Cho Dem-Ben Luc Rivers, over 7 consecutive periods from April 2019 to October 2021. Each surface sample was analyzed for 9 heavy metals including Fe, Mn, Cr, Zn, Cu, Pb, Cd, Ni, As. The sampling technique and sample treatment were done based on the Standard Methods for the Examination of Water and Wastewater. The time and space variation of heavy metal concentrations were examined to test the analysis of variance (ANOVA) and correlation among all the parameters using R statistical software. The results suggest a spatial homogeneity of heavy metals in the surface water the studied rivers. Among all nine examined heavy metals in the studied area, the concentrations of Fe (1.00 ÷ 5.06 mg/L) and Mn (0.14 ÷ 0.28 mg/L) are the highest, and the concentrations of Cr, Cd and As are the lowest that lower limit of detection. The results suggested that the mean concentrations of Fe and Mn were above the acceptable limits of the National technical regulation on surface water quality (QCVN 08-MT: 2015/BTNMT). While the concentrations of Fe, Mn, Zn, Cu, Pb, Ni do not meet the Water quality criteria for aquatic life (United State Environmental Protection Agency). Anthropogenic activities can be the main source of heavy metals in in the surface water of the Doi-Cho Dem-Ben Luc Rivers. Among the heavy metals, a significant positive correlation was observed between Fe, Mn, Zn and Ni (0.64 ÷ 0.87), whereas Cu exhibited a significant positive correlation with Ni (0.51). While Cu and Pb showed a not too strong correlation with Fe, Mn, Zn and Ni (0.25 ÷ 0.48). The distribution of heavy metals may also be influenced by properties of heavy metals and fluctuations in water flows. The results provide guidance for controlling heavry metal pollution and protectting water sources in the Doi-Cho Dem-Ben Luc Rivers.

PL

Metale ciężkie stanowią palący problem zanieczyszczenia w ekosystemach wodnych ze względu na ich trwałość, toksyczność dla środowiska i bioakumulację. Środowiska wodne sa zasilane w metale ciężkie z nieoczyszczonych lub nieodpowiednio oczyszczonych ścieków ze źródeł domowych, przemysłowych, rolniczych i żeglugowych. Rzeki Doi-Cho Dem-Ben Luc odgrywają kluczową rolę w nawadnianiu terenów, transporcie odnym i odbudowie ekologicznej. Kluczowe znaczenie ma ustalenie stanu zanieczyszczenia, czynników wpływających, zagrożeń ekologicznych i możliwych źródeł metali ciężkich w wodach powierzchniowych rzek Doi-Cho Dem-Ben Luc. W artykule przedstawiono wyniki badania wód powierzchniowych, próbki pobrano z 7 punktów pomiarowych z rzek Doi-Cho Dem-Ben Luc przez 7 kolejnych okresów od kwietnia 2019 r. do października 2021 r. Każda próbka została przeanalizowana pod kątem zawartości 9 metali ciężkich: Fe, Mn, Cr , Zn, Cu, Pb, Cd, Ni, As. Metodyka pobierania próbek i obróbki próbek zostały opracowane w oparciu o Standardowe Metody Badania Wód i Ścieków. Zbadano zmienność w czasie i przestrzeni stężeń metali ciężkich, do analizyy wyników wykorzystano analizę wariancji (ANOVA) i korelacji między wszystkimi parametrami przy użyciu oprogramowania statystycznego. Wyniki sugerują przestrzenną jednorodność zawartości metali ciężkich w wodach powierzchniowych badanych rzek. Spośród wszystkich dziewięciu badanych metali ciężkich w badanym terenie najwyższe są stężenia Fe (1,00 ÷ 5,06 mg/L) i Mn (0,14 ÷ 0,28 mg/L), a najniższe Cr, Cd i As (wartości odpowiadające dolnej granicy wykrywalności). Wyniki wskazują, że średnie stężenia Fe i Mn były powyżej dopuszczalnych limitów, opisanych w krajowych normach dotyczących jakości wód powierzchniowych (QCVN 08-MT: 2015/BTNMT). Natomiast stężenia Fe, Mn, Zn, Cu, Pb, Ni nie spełniają kryteriów jakości wody dla organizmów wodnych (Agencja Ochrony Środowiska Stanów Zjednoczonych). Działalność antropogeniczna może być głównym źródłem metali ciężkich w wodach powierzchniowych rzek Doi-Cho Dem-Ben Luc. Wśród metali ciężkich zaobserwowano istotną dodatnią korelację między zawartością Fe, Mn, Zn i Ni (0,64 ÷ 0,87), natomiast Cu wykazywała istotną dodatnią korelację z Ni (0,51). Zawartości Cu i Pb wykazywały niezbyt silną korelację z Fe, Mn, Zn i Ni (0,25 ÷ 0,48). Na rozmieszczenie metali ciężkich mogą mieć również wpływ właściwości metali ciężkich oraz wahania przepływów wody. Wyniki dostarczają wskazówek dotyczących kontrolowania zanieczyszczenia metalami ciężkimi i ochrony źródeł wody w rzekach Doi-Cho Dem-Ben Luc.

11

Drinking Water Before and After Processing in the Water Supply

Maloku Faton, Veseli Besa, Dobroshi Florent

Ecological Engineering & Environmental Technology

|

2022

|

Vol. 23, iss. 6

82--88

EN

The quality and quantity of water throughout history have been an important factor in determining human wellbeing. Many types of pollution threaten rivers, including aquatic organisms, pesticides, soil erosion, chemical fertilisers and industrial pollutants. An extraordinary asset for our country is the natural waters where their quality is particularly important from a chemical point of view. From the studies carried out so far on the quality of natural waters, there are shortcomings mainly related to the limited number of physical-chemical parameters measured as well as to the water resources being processed. As for consumption, the quality of water is of great importance, and the purpose of this work is the analysis of water quality in the Aqueduct, which is of great importance for all residents who are supplied by this Aqueduct. The basic substance of life is water, therefore it is necessary to determine the quality of drinking water in the water supply network through physical-chemical and organoleptic parameters. The analysis of water in the water supply network was done before and after processing every four hours during the day and three days in a row. The obtained results show the condition and quality of raw water and processed water used by consumers, whereas a reference basis they are taken from Directive 98/83/EC for the quality of water for human consumption. From the results, we came to the conclusion that the water analyzed after processing is of sufficient quality to be used as drinking water.

12

Features of the offer in the distribution area. Comparative analysis on the example of dairy cooperatives in the Małopolskie and Świętokrzyskie voivodeships

Konieczna Izabela

Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska

|

2021

|

z. 150

69--80

EN

Purpose: The first purpose of this article is to identify and compare the validity of features of the offer for the customer in the area of distribution from the point of view of dairy cooperatives from Poland from the Świętokrzyskie and Małopolskie provinces, which are adjacent to each other. Design/methodology/approach: Direct interviews using a questionnaire survey were conducted among representatives of cooperatives representing 41% of the population, which resulted from the willingness to participate in the survey. Findings: The analysis of the research results, taking into account the mean for all customers, show that the indicated features of the offer for the customer in the distribution area were considered by cooperatives from both provinces as very important (there was only one feature that was not indicated by all cooperatives). Originality/value: The comparison of the validity of features of the offer for the customer in the area of distribution of selected cooperatives from two different voivodeships.

13

Distribution and abundance of the glossy ibis (Plegadis falcinellus) in wintering and breeding grounds in Northeast Algeria

Youcefi Abdeldjalil, Bensakhri Zinette, Bachir Abdelkrim Si, Atoussi Sadek, Zebsa Rabah

Polish Journal of Ecology

|

2021

|

Vol. 69, nr 3-4

193--204

EN

Atmospheric conditions play an important role in structuring avian communities in space and time. Here we assess the role of weather conditions on the distribution and abundance of the enigmatic glossy ibis (Plegadis falcinellus) in Northeast Algeria in both wintering grounds and in breeding areas in a survey spanning from 2011 to 2019. During the study period, cooler years were wetter and warmer years were drier. The wintering population size in the region could be estimated to 200-300 individuals. The number of individuals in wintering grounds increased in recent years in one site (Berrihane), but it did not show a strong association with weather conditions prior to wintering. Four breeding colonies were detected in highly-vegetated ponds with in-water trees where the number of breeding pairs was the highest. Extinction was recorded for two colonies (50% of colonies) where one permanently disappeared and one exhibited a series of extinctions and recolonizations across years. The estimated colony size was larger at El Dakhla (60–105 pairs) than El Chatt (0–42 pairs), Fezara Lake (25–41 pairs), and Tonga Lake (0–2 pairs). Climate conditions seemed to correlate with the number of pairs in one site (El Chatt) such that warm and dry years were associated with lower number of individuals. We discuss that disturbance and pollution might play a role in colony establishment but the number of pairs is positively related to the extinction of a nearby colony, suggesting that those refuge colonies are crucial for the persistence of the species in the area. This study presents historical data on the occurrence and abundance of a relatively unstudied species and gives new information on its climatic sensitivity which might be helpful for predicting future climate change impacts.

14

Spatio-temporal variation of microphytoplankton communities in Obhur Creek, the central Red Sea

El-Sherbiny Mohsen M., Al-Harbi Mamdouh A., Kumar Anand J.

Oceanological and Hydrobiological Studies

|

2021

|

Vol. 50, No. 1

98--114

EN

The abundance and distribution of microphyto-plankton and related physicochemical factors were assessed monthly in Obhur Creek, the central Red Sea. Sampling was carried out near the entrance, the middle and end parts of the creek. During the course of the present study, the Red Sea was characterized by predominantly oligotrophic conditions. Nutrient concentrations were relatively higher in the end part of the creek compared to the two other study sites. Chlorophyll a was also low throughout the year (average: 0.35 ± 0.32 mg m−3), except in May when it showed clear peaks at open-water and middle sites of the creek (1.85 and 1.04 mg m−3, respectively). Phytoplankton abundance followed a similar pattern to that of chlorophyll a with considerably higher abundance at these sites in May (3063.27 × 103 and 1082.34 × 103 individuals m−3, respectively). This unusually higher abundance was mostly due to the proliferation of the diatom Pseudo-nitzschia cf. delicatissima (Cleve) Heiden. Silicate concentrations were statistically significantly correlated with total phytoplankton. A total of 220 phytoplankton species were recorded during the study period (117 diatoms, 99 dinoflagellates and four cyanophytes). Diatoms dominated in the phytoplankton abundance (75%) and were followed by dinoflagellates (20%), while cyanophytes accounted for a minimal proportion. Of all phytoplankton species observed during the study, 21 diatom and four dinoflagellate species were considered as new records for the Red Sea, and two diatom and 14 dinoflagellate species were listed as harmful algal species worldwide.

15

Historical review of Dutch Pectinariidae with Pectinaria belgica as a new taxon for the Netherlands (Annelida: Polychaeta: Pectinariidae)

van Haaren Ton

Oceanological and Hydrobiological Studies

|

2021

|

Vol. 50, No. 3

278--298

EN

Two trumpet worms (Pectinariidae), which do not resemble the two known species: Lagis koreni Malmgren, 1866 and Amphictene auricoma (Müller, 1776), have recently been collected in the Dutch North Sea (Oyster Grounds). Their characteristics match those of Pectinaria belgica (Pallas, 1766), a species with a northern distribution. This paper summarizes the current state of knowledge of Dutch Pectinariidae and describes in detail the historical records of trumpet worms recorded in the Netherlands, along with the confusion around the species epithet belgica. Pectinaria belgica is reported here for the first time from the Dutch North Sea.

16

Distribution of Didymosphenia, Gomphonema and Gomphosphenia diatoms (Bacillariophyta) in Turkish inland waters

Solak Cüneyt Nadir, Wojtal Agata Z., Rybak Mateusz, Yılmaz Elif

Oceanological and Hydrobiological Studies

|

2021

|

Vol. 50, No. 2

198--219

EN

In this study, a total of 53 taxa were identified from 13 catchments in Turkey. Gomphonema affine var. rhombicum E.Reichardt, G. angusticephalum E.Reichardt & Lange-Bertalot, G. calcifugum Lange-Bertalot & E.Reichardt, G. elegantissimum E.Reichardt & Lange-Bertalot, G. exilissimum (Grunow) Lange-Bertalot & E.Reichardt, G. graciledictum E.Reichardt, G. italicum var. densistriatum Levkov, Mitic-Kopanja & E.Reichardt, G. linearoides Levkov, G. megolobrebissonii D.A.Chudaev, Kociolek & M.A.Golobova, G. minusculum Krasske, G. minutum f. syriacum Lange-Bertalot & Reichardt, G. reediae Levkov, Mitic-Kopanja & E.Reichardt, G. sarcophagus W.Gregory, G. subcapitatum (Grunow) E.Reichardt & Levkov and Gomphosphenia holmquistii (Foged) Lange-Bertalot were recorded for the first time in Turkey. Of the identified taxa, Didymosphenia geminata (Lyngbye) M.Schmidt, Gomphonema acuminatum Ehrenberg, G. affine Kützing, G. angustatum (Kützing) Rabenhorst, G. augur Ehrenberg, G. micropus Kützing, G. minutum (C.Agardh) C.Agardh, G. olivaceum (Hornemann) Brébisson, G. parvulum (Kützing) Kützing and G. truncatum Ehrenberg are common in the waters. G. angustius E.Reichardt, G. insignaffine Reichardt, G. insigne W.Gregory, G. italicum Kützing, G. laticollum E.Reichardt, G. pumilum var. rigidum E.Reichardt & Lange-Bertalot, G. stonei E.Reichardt, G. supertergestinum E.Reichardt and G. vibrio Ehrenberg have been recently recorded from the Turkish waters. The genus Gomphosphenia in Turkey has so far been represented only by G. grovei (M.Schmidt) Lange-Bertalot.

17

A review of research on the Lemanea genus in Serbia

Mitrović Aleksandra B., Đorđević Nevena B., Simić Snežana B.

Oceanological and Hydrobiological Studies

|

2021

|

Vol. 50, No. 1

47--59

EN

The first data on the Lemanea genus in Serbia come from the late 20th century. Only one species, L. fluviatilis, was reported from 10 localities in Serbian riverine ecosystems between 1991 and 2017. Extensive research on this genus was performed in April–November 2017–2019, surveying 150 localities in 97 upland and mountain rivers. During this study period, the Lemanea genus was recorded at 14 localities in 12 rivers, while it disappeared from five previously reported localities. A total of four taxa were identified: Lemanea fucina, L. rigida, Lemanea sp. and L. fluviatilis. Lemanea fucina and L. rigida were recorded in Serbia for the first time. L. fluviatilis was the most common taxon. Our research confirmed that Lemanea species prefer similar specific environmental conditions. These species were found in temperate, soft or moderately hard, well-oxygenated and weakly alkaline waters, with low, moderate or high conductivity, and in waters with low content of inorganic nutrients. Due to their sensitivity to changes in environmental conditions, Lemanea species are exposed to negative anthropogenic impact leading to the degradation of their habitats. Intensive construction of small hydropower plants has threatened most habitats of the Rhodophyta species in the last few years.

18

Exploring the process of aqua logistics in the Malaysian aquaculture industry - a qualitative study

Aziz Zuraimi Abdul, Hussin Nik Syuhailah Nik, Aziz Nurul Ashykin Abd, Latif Mohd Nasrulddin Abd

LogForum

|

2021

|

Vol. 17, no. 2

287--298

EN

Background: The production of freshwater aquaculture fish has developed quickly and being important activity. An intensive logistics system is required to handle the shipment since the aquaculture products especially aquaculture fish are perishable. The process begins right after fish farming to final consumption. It involves a large number of stakeholders as the significant effort is required to build an efficient supply chain. However, little is known about process faced by the Malaysian aquaculture entrepreneurs during the aqua logistics activities. Therefore, this study aims to address this gap by exploring this phenomenon. Methods: For methodology part, a series of 12 aquaculture companies through focus group discussion (FGD) with the entrepreneurs were done across aqua logistic business. This was done to explore the topic and refine the research questions. Results: The present study discovers that there were linkages along the value chain of aqua logistics in aquaculture industry, which provides a specific recommendation to stakeholders in managing day-to-day logistics operations. Also, the findings show four main process emerging from the qualitative study, which led to the following themes, namely: [i] procurement; [ii] production; [iii] order fulfillment; and [iv] transport and distribution. Conclusion: The adopted qualitative methodology provided rich information that will lead the future research. In brief, this study has contributed new knowledge to the existing literature in aqua logistics and will benefit the future studies.

PL

Wstęp: Produkcja ryb słodkowodnych rozwija się szybko i zyskuje coraz większe znaczenie. Intensywny system logistyczna wymaga dobrej obsługi dostaw ze względu na łatwą podatność na psucie się oferowanych produktów. Proces zaczyna się od momentu połowu aż do dostawy do końcowego konsumenta. Obejmuje swoim zasięgiem wielu uczestników, budujących wydajny łańcuch dostaw. Aczkolwiek nadal jest mało dostępnej wiedzy na temat procesu realizowanego przez malezyjskich przedsiębiorców tej branż podczas czynności w obrębie całego łańcucha logistycznego. Celem pracy jest pogłębienie i rozszerzenie wiedzy w tym obszarze. Metody: Do badania wykorzystano grupy fokusowe 12 przedsiębiorstw związanych z badaną działalnością w celu analizy problemu. Wyniki: Prezentowane badania wykazały powiązania wartościowe pomiędzy uczestnikami łańcucha dostaw w obrębie aqua-przemysłu, które dostarczają specyficznych rekomendacji uczestnikom łańcucha w codziennych operacjach logistycznych. Dodatkowo wyodrębniono cztery główne procesy związane z następującymi obszarami: zakupy, produkcja, realizacja zamówień oraz transport i dystrybucja. Wnioski: Zastosowana metodologia jakościowa dostarczyła obfitej informacji, które będzie wykorzystana w kolejnych pracach. Rozszerza ona istniejący stan wiedzy na temat aqua-logistyki i stanowi bazę dla przyszłych badań.

19

Energetyczne liczniki z wysokim IQ

Kowalczyk Artur

Energia i Recykling : gospodarka obiegu zamkniętego

|

2021

|

nr 11

28--30

PL

Już wkrótce wszystkie budynki, także te komunalne, wyposażane będą w najnowsze rozwiązanie, czyli inteligentne liczniki energetyczne, a ich stosowanie stanie się obowiązkiem prawnym. Ta zmiana wiązać się będzie prawdopodobnie z nieprzeciętnymi korzyściami – tak dla odbiorców energii, jak i dla jej dystrybutorów.

20

Effect of heat transfer correlation on wet cylinder liner temperature distribution when converting an old engine into a turbocharged engine

Trung Kien Nguyen

Archives of Thermodynamics

|

2021

|

Vol. 42, no 3

159--172

EN

For conventional diesel engines, two of the most widely used global correlations are due to Woschni and Hohenberg. Besides, the modern diesel engines used a new heat transfer coefficient correlation was proposed by Finol and Robinson. In Vietnam, improving engine power density is a trend of improving non-turbocharged base engines by using a supercharging system with exhaust gas energy recovery. Increasing engine power by the turbocharger is limited for two reasons: mechanical stress and thermal stress of the components surrounding the combustion chamber. In general, the heat transfer coefficient has a major effect on heat transfer rate, especially during the combustion process. So, the purpose of this study is to compare the cylinder distribution results from the simulation using the equations of Woschni and Hohenberg and compare to the experiment results when converting an old heavy-duty engine into a turbocharged engine. Results show that the cylinder distribution using Hohenberg’s correlation has a good agreement with the experiment results, especially in the case of a turbocharged engine.