Wyniki wyszukiwania - BazTech

1

Influence of the stator current reconstruction method on direct torque control of induction motor drive in current sensor postfault operation

Adamczyk Michal, Orlowska-Kowalska Teresa

Bulletin of the Polish Academy of Sciences. Technical Sciences

|

2022

|

Vol. 70, nr 1

art. no. e140099

EN

Modern induction motor (IM) drives with a higher degree of safety should be equipped with fault-tolerant control (FTC) solutions. Current sensor (CS) failures constitute a serious problem in systems using vector control strategies for IMs because these methods require state variable reconstruction, which is usually based on the IM mathematical model and stator current measurement. This article presents an analysis of the operation of the direct torque control (DTC) for IM drive with stator current reconstruction after CSs damage. These reconstructed currents are used for the stator flux and electromagnetic torque estimation in the DTC with space-vector-modulation (SVM) drive. In this research complete damage to both stator CSs is assumed, and the stator current vector components in the postfault mode are reconstructed based on the DC link voltage of the voltage source inverter (VSI) and angular rotor speed measurements using the so-called virtual current sensor (VCS), based on the IM mathematical model. Numerous simulation and experimental tests results illustrate the behavior of the drive system in different operating conditions. The correctness of the stator current reconstruction is also analyzed taking into account motor parameter uncertainties, especially stator and rotor resistances, which usually are the main parameters that determine the proper operation of the stator flux and torque estimation in the DTC control structure.

2

Model predictive control of NPC three-level grid-tied converter based on reconstructed current

Li Yanyan, Xiao Han, Jin Nan, Yan Guanglu

Archives of Electrical Engineering

|

2022

|

Vol. 71, nr 2

363--377

EN

The neutral point clamped (NPC) three-level grid-tied converter is the key equipment connecting renewable energy and power grids. The current sensor fault caused by harsh environment may lead to the split of renewable energy. The existing sensor fault-tolerant methods will reduce the modulation ratio index of the converter system. To ensure continuous operation of the converter system and improve the modulation index, a model predictive control method based on reconstructed current is proposed in this paper. According to the relationship between fault phase current and a voltage vector, the original voltage vector is combined and classified. To maintain the stable operation of the converter and improve the utilization rate of DC voltage, two kinds of fault phase current are reconstructed with DC current, normal phase current and predicted current, respectively. Based on reconstructed three-phase current, a current predictive control model is designed, and a model predictive control method is proposed. The proposed method selects the optimal voltage vector with the cost function and reduces time delay with the current reconstruction sector. The simulation and experimental results show that the proposed strategy can keep the NPC converter running stably with one AC sensor, and the modulation index is increased from 57.7% to 100%.

3

Sterowanie polowo-zorientowane silnikiem indukcyjnym bez pomiaru prądów fazowych

Adamczyk Michał, Orłowska-Kowalska Teresa

Przegląd Elektrotechniczny

|

2019

|

R. 95, nr 8

151--155

PL

W artykule zaproponowano metodę sterowania polowo-zorientowanego silnikiem indukcyjnym przy wykorzystaniu tylko pomiaru napięcia w obwodzie pośrednim falownika napięcia oraz pomiaru prędkości. Przeprowadzono badania symulacyjne wpływu błędnej identyfikacji parametrów na działanie algorytmu odtwarzania prądów uzwojenia stojana oraz pokazano działanie tego algorytmu w różnych stanach pracy układu.

EN

In this article field-oriented-control method for the induction motor (IM) is proposed using only voltage measurement in the intermediate circuit of the voltage inverter and rotor speed measurement. Simulation studies of the impact of incorrect identification of the IM parameters on the accuracy of the stator phase current reconstruction are carried out and the algorithm accuracy is analyzed in various operating conditions of the drive system.