Wyniki wyszukiwania - BazTech

1

Effect of vacuum conditions on stability and crystallization of cobalt based amorphous alloy

Yazici Ziya Ozgur

Materials Science Poland

|

2020

|

Vol. 38, No. 1

181--188

EN

The aim of this work was to investigate the effects of moderate vacuum conditions (10 Pa, 1 × 103 Pa and 2 × 104 Pa) on glass forming ability, thermal stability and aging behavior of Co42Cu1Fe20Ta5:5B26:5Si5 amorphous samples in terms of size and distribution of crystalline precipitates. The thinnest parts (300 μm) of the wedge-shaped samples were amorphous for all vacuum conditions, and they had similar compositional, structural and thermal characteristics. However, they represented different microstructural features after heat treatments at 950 K and 1100 K. The same phases precipitated in all samples but the amount and the size of the precipitates increased as the pressure was raised to the normal atmospheric value. The differences in the glass forming ability and the microstructure due to aging are considered to originate from lower thermal characteristics, such as relaxation and reduced glass temperature as well as γ parameter, resulting from the poor vacuum pressure used in the production process. The differences in the microstructures and hardness values caused by heat treatments have been observed.

2

The effect of N,N’-bis(benzoyl)dodecanedihydrazide on enhancing the crystallization rate of poly(L-lactic acid)

Cai Y.-H., Zhao L.-S.

Polimery

|

2018

|

T. 63, nr 11-12

815--820

EN

The effect of N,N’-bis(benzoyl)dodecanedihydrazide (BADH) as a newly-developed organic nucleating agent on the crystallization process of poly(L-lactic acid) (PLLA) was examined in this study. Non-isothermal crystallization results indicated that BADH had excellent acceleration effects on the melt-crystallization of PLLA, and a larger proportion of BADH promoted more powerful crystallization. However, BADH inhibited the crystal growth of PLLA during the cold-crystallization process, and an increase of BADH concentration caused the non-isothermal crystallization peak to shift towards a higher temperature and become much wider. Although increased cooling rates might decrease nuclei density, it was surprising to see that BADH contents of 2 wt % to 3 wt % were able to accelerate the crystallization of PLLA upon fast cooling at 20 °C/min or even higher cooling rates. Besides, the effect of the final melting temperature on the melt-crystallization process of PLLA was not negligible, the relevant results implied that 190 °C was the optimal blending temperature of PLLA and BADH. Isothermal crystallization showed that, in the best case of the PLLA/3% BADH sample, the half-time of crystallization has a minimum value of 22.9 s at 115 °C. The calculation of frontier molecular orbital energies confirmed that the interaction between PLLA and BADH could form more easily during the melting blend than PLLA itself, indicating that the probable nucleating mechanism was chemical nucleation.

PL

Oceniano wpływ nowo opracowanego organicznego środka zarodkującego – N,N’-bis(benzoilo)dodekanodihydrazydu (BADH) – na krystalizację poli(kwasu L-mlekowego) (PLLA). Wyniki badania nieizotermicznej krystalizacji PLLA wskazują, że dodatek BADH silnie przyspiesza krystalizację w stopie, a zwiększenie ilości BADH w stopionym PLLA skutkuje jego efektywniejszą krystalizacją. Dodatek BADH w takim samym stężeniu opóźnia jednak zimną krystalizację PLLA, pik temperatury krystalizacji poszerza się i przesuwa w kierunku większych wartości temperatury. Chociaż zwiększenie szybkości chłodzenia może zmniejszać gęstość zarodkowania, to dodatek 2–3 % mas. BADH do PLLA w tych warunkach zwiększa szybkość krystalizacji, przy szybkości chłodzenia nawet do 20 °C/min. Wpływ końcowej temperatury topnienia stopu na szybkość krystalizacji był istotny; stwierdzono, że optymalną temperaturą topnienia PLLA z BADH jest 190 °C. Badania kinetyki izotermicznej krystalizacji wykazały, że próbka PLLA/3% BADH charakteryzuje się najmniejszą wartością t 1/2 w temperaturze 115 °C. Obliczenia w programie DMol³ granicznej molekularnej energii orbitalnej potwierdziły, że podczas topienia mieszanki PLLA i BADH łatwiej dochodzi do interakcji niż podczas topienia czystego PLLA, co wskazuje, że prawdopodobnym mechanizmem zarodkowania jest zarodkowanie chemiczne.

3

Investigations of crystallization behaviour of Co80Si9B11 amorphous alloy

Lesz S., Nowosielski R., Zajdel A., Kostrubiec B., Stokłosa Z.

Archives of Materials Science and Engineering

|

2007

|

Vol. 28, nr 2

91-97

EN

Purpose: This paper describes crystallization kinetics and changes of magnetic properties involved by process of crystallization of the amorphous Co80Si9B11 alloy. Design/methodology/approach: The following experimental techniques were used: X-ray diffraction (XRD), electrical resistivity in situ measurements (four-point probe), static and dynamic measurements of magnetic properties (magnetic balance, fluxmeter, Maxwell-Wien bridge). Findings: In this work has been performed influence of thermal annealing on crystallization kinetics and magnetic properties amorphous Co80Si9B11 alloy. Practical implications: The attractive properties of Co-Si-B alloy are of special interest for basic research on the materials as well as for their potential applications, like magnetic sensors. The Co soft magnetic material is used in noise filters, saturable reactors, miniature inductance elements for abating spike noise, mains transformers, choke coils, zero-phase current transformers, and magnetic heads etc., i.e., devices which are expected to exhibit high levels of permeability at high frequencies. Originality/value: It has been shown that thermal annealing at temperature close to the crystallization temperature leads to a significant increase of the initial magnetic permeability. The maximum permeability for examined alloy in as quenched state is about 11300.