Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 17

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  chimney cap
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Adequately designed natural ventilation is the cheapest and easiest way to effectively remove indoor pollutants and keep the air inside a building fresh. A prediction of the performance and effectiveness of ventilation in order to determine the design of a ventilation system can provide real and long-term cost savings. The worst time in terms of the efficiency of natural ventilation is the spring-autumn transition period [7]. In order to improve the efficiency of natural ventilation, chimney caps are used, among others. They are designed to improve the chimney effect described in colloquial language as a chimney draft. The chimney effect is a physical phenomenon of the formation of a spontaneous flow of a warmer gas, e.g. air, from the bottom up in stem channels [12]. The article analyses the influence of the chimney cowl on the improvement of the chimney effect in an apartment of a multi-family building with natural ventilation. Long-term tests of the chimney draft were carried out for the case without and with a chimney cap. The paper presents the results of the performance (air change rate, ACH) of natural ventilation for a building with an inlet gap measured for the transitional season (between the heating and the summer season). The measurements were performed during a windy period.
2
Content available remote Badania porównawcze nasad kominowych na przykładzie TRN-150 i T-22 -160
PL
W artykule przedstawiono porównanie wyników badań dwóch nasad kominowych: jednej z najczęściej stosowanych obecnie nasad kominowych TRN oraz wywietrzaka nowego typu T-22. Zaprezentowano schematy wywietrzaków, zakres przeprowadzonych badań oraz schemat i opis stanowiska badawczego. W opracowaniu przedstawiono metodę przeprowadzonych testów. Badania wywietrzaków przeprowadzono w płaszczyźnie pionowej i poziomej. Zaprezentowano wykresy podciśnienia w funkcji strumienia objętości powietrza wentylacyjnego. Przedstawiono również wyniki badań współczynników oporów miejscowych wywietrzaków. Wyniki pomiarów omówiono we wnioskach.
EN
The article presents the comparison of the test results of two chimney caps: one of the most commonly used TRN chimney cap and the new chimney cap type T-22. The schemas of the chimney caps, range of the tests and the scheme with description of the test stand are presented. The study presents the method of tests carried out. The research of chimney caps was carried out in the vertical and horizontal planes. Charts were constructed and negative pressure was applied as a function of the volume of ventilation air. The results of tests of the chimney caps resistance coefficients are also presented. The measurements results are discussed in the conclusions.
PL
W artykule porównano wyniki aerodynamicznych badań wywietrzaka typu T (trójnik wentylacyjny) oraz jego modyfikacji. Modyfikacja polegała na dodaniu do znanej konstrukcji wywietrzaka typu T ekranów ochronnych. W opracowaniu zaprezentowano schematy wywietrzaków, zakres badań oraz schemat i opis stanowiska badawczego. Omówiono metodę wykonywanych badań laboratoryjnych. W artykule przedstawiono tylko wyniki badań wywietrzaka z poziomym nawiewem powietrza. Wyniki pokazano w formie wykresów i podsumowano wnioskami.
EN
The article presents the comparison of the results of aerodynamic tests of the T type chimney cap (ventilation tee) and its modification. The modification is addition protective aerodynamic screens to the known T type chimney cap. In this paper presents schemes of the chimney caps, the range of the tests and the scheme of the test stand. The method of laboratory tests was discussed. In the article the authors presents the results of tests only for the horizontal plane of air flow on the chimney cap. The results of the tests are shown in the form of charts and summarized by conclusions.
PL
W artykule przedstawiono porównanie wyników badań aerodynamicznych wywietrzaków typu DUO-150 firmy „Uniwersal” oraz dobrze znanej konstrukcji typu T. Zaprezentowano schematy wywietrzaków, ich zakres badań oraz schemat i opis stanowiska badawczego. Omówiono metodę przeprowadzonych badań. Wyniki przedstawiono w formie wykresów i podsumowano wnioskami.
EN
The article presents the aerodynamic test results of the DUO-150 type chimney cap of the „Uniwersal” company and a well-known T-type construction. The chimney cap’s schema, the range of the tests and description and schema of the test stand are presented. The methodology of the research are described. The results of the test are presented in the form of charts and summarized with conclusions.
PL
Celem stosowania nasad kominowych jest zwiększenie strumienia powietrza wentylacyjnego dzięki wykorzystaniu energii kinetycznej wiatru oraz ograniczenie negatywnego wpływu zawirowań wynikających z geometrii dachu na działanie wentylacji budynku. Działanie nasad kominowych zależy od kierunku i siły wiatru. Jednym z przykładów tej zależności jest nasada typu H. Ma ona bardzo dobre właściwości, ale tylko przy kierunku wiatru prostopadłym do jej ramion. Zmiana kierunku wiatru o kąt 90° powoduje duży spadek wytwarzanego podciśnienia. Celem badań opisanych w artykule było określenie wpływu zmiany kierunku wiatru w płaszczyźnie poziomej i pionowej na charakterystykę nasady kominowej o zwichrowanych przeciwbieżnie ramionach pionowych. Badania przeprowadzono na oryginalnym stanowisku badawczym umożliwiającym zmianę kierunku działania strugi powietrza w stosunku do charakterystycznych wymiarów nasady kominowej. Pomiary wykonano w warunkach izotermicznych. Zwichrowanie ramion poziomych spowodowało polepszeniem parametrów nasady przy kierunku wiatru równoległym do ramienia poziomego nasady. Zmodernizowana nasada wykazuje także lepsze właściwości przy większości kierunków wiatrów wstępujących i zstępujących, dzięki czemu ma większą tolerancję w razie wystąpienia zawirowań. Zmiana ukształtowania ramion pionowych spowodowała pewne zmniejszenie wytwarzanego podciśnienia dla najkorzystniejszego kierunku wiatru, jednak skompensowane to zostało bardziej jednorodnymi właściwościami aerodynamicznymi.
EN
The purpose of using chimney caps is to increase the air flow due to the use of kinetic energy of the wind as well as to limit the negative impact of turbulences from the roof geometry on the gravity ventilation. This result chimney caps have high dependency on wind direction and strength. One example of this dependency is the H-type chimney cap. It has very good properties, but when the wind flows perpendicularly to its arms. The change of the wind direction by 90° causes a large decrease in the generated sub-pressure. The purpose of the research presented in this article was to determine the influence of the change of the wind direction in the horizontal and vertical planes on chimney cap characteristics. The research was carried out on the original test stand which enabled us to change the air flow direction to change in relation to the characteristic dimensions of the chimney cap. The measurements were made under isothermal conditions. A chimney cap with twisted counter-rotating horizontal arms has better work parameters if the wind direction is parallel to the horizontal duct of the chimney cap. The upgraded chimney cap has also better characteristics for the majority of horizontal and vertical winds. The chimney cap is less sensitive to wind turbulences. The change of the shape of the vertical arms caused some reduction of the generated sub-pressure for the most favorable wind direction, but that was compensated by more permanent aerodynamic properties.
PL
W artykule przedstawiono wyniki badań aerodynamicznych wywietrzaka nowego typu DUO-150 firmy „Uniwersal”. Zaprezentowano schemat wywietrzaka, zakres jego badań oraz schemat i opis stanowiska badawczego. Omówiono także metodę przeprowadzonych badań, wyniki których przedstawiono w formie wykresów. Podano również wnioski z badań.
EN
The article presents the aerodynamic test results of the DUO- 150 type chimney cap of the „Uniwersal” company, another construction from all tested. The chimney cap’s schema, the range of the tests and description and schema of the test stand are presented. The methodology of the research are described. The results of the test are presented in the form of charts and summarized with conclusions.
PL
Zaparowane szyby w domu, wilgoć, a także złe samopoczucie mieszkańców mogą świadczyć o niewłaściwie działającym systemie wentylacji grawitacyjnej (naturalnej) w budynku. Przyczyn osłabienia wydajności tego typu wentylacji może być wiele. Do najczęstszych zaliczamy niesprzyjające warunki atmosferyczne, okresowy wzrost zanieczyszczenia powietrza w pomieszczeniach, zbyt mały lub wręcz brak nawiewu powietrza do pomieszczenia oraz za małe pole przekroju kanału wywiewnego. Wychodząc naprzeciw problemom związanym z niekorzystnymi warunkami klimatu zewnętrznego, producenci galanterii budowlanej proponują zastosowanie między innymi nasady kominowej w celu poprawy sprawności wentylacji grawitacyjnej. Jest to rozwiązanie popularne, w szczególności w przypadku występowania ciągu wstecznego.
EN
Steamed up window panes in the house, dampness and bad physical state of occupants may constitute a sign of improperly working gravity (natural) ventilation system in the building. Causes of weakened efficiency of this type of ventilation may be numerous. The most frequent include non-favourable atmospheric conditions, periodic increase of air pollution in rooms, too weak or even absent supply of air to the room as well as excessively small section area of the exhaust channel. In order to address the problems connected with non-favourable conditions of the outside climate, manufacturers of construction accessories suggest, among other things, using a chimney pot in order to improve the efficiency of gravity ventilation. This is a popular solution, especially in the case of occurrence of reverse thrust.
PL
Celem stosowania nasad kominowych jest zwiększenie strumienia powietrza wentylacyjnego dzięki wykorzystaniu energii kinetycznej wiatru oraz ograniczenie negatywnego wpływu zawirowań wynikających z geometrii dachu na działanie wentylacji budynku. Nasady kominowe wykazują dużą zależność od kierunku i siły wiatru. Jednym z przykładów tej zależności jest nasada typu H. Ma ona bardzo dobre właściwości, ale tylko przy kierunku wiatru prostopadłym do jej ramion. Zmiana kierunku wiatru o kąt 90° powoduje duży spadek wytwarzanego podciśnienia. Celem badań przedstawionych w artykule było określenie wpływu zmiany kierunku wiatru w płaszczyźnie poziomej i pionowej na charakterystykę nasady kominowej o zwichrowanych przeciwbieżnie ramionach pionowych. Badania przeprowadzono na oryginalnym stanowisku badawczym umożliwiającym zmianę kierunku działania strugi powietrza w stosunku do charakterystycznych wymiarów nasady kominowej. Pomiary wykonano w warunkach izotermicznych. Poznanie charakterystyki nasad kominowych umożliwia ich lepsze wykorzystanie przez optymalny dobór do istniejących warunków klimatycznych (róża wiatrów) i budowlanych (geometria budynku, charakter zabudowy) oraz właściwy montaż.
EN
Chimney caps increase the air flow due to the use of the kinetic energy of wind. They also limit the negative impact of turbulences that result from the roof geometry on the gravity ventilation. Chimney caps show high dependency on wind direction and strength. One example of this dependency is the H-type chimney cap. It has very good properties, but only when the wind flows perpendicularly to its arms. The change of the wind direction by 90° causes a large decrease in the generated sub-pressure. The purpose of the research presented in this article was to determine the influence of the change of the wind direction in the horizontal and vertical planes on the characteristic of a chimney cap. The research was carried out on the original test stand which enabled us to change the air flow direction in relation to the characteristic dimensions of the chimney cap. The measurements were made under isothermal conditions. The knowledge of the characteristics of chimney caps makes it possible to select a chimney cap optimal for existing climatic (wind rose) and building conditions (building geometry, the nature of the building) which enables correct installation of the device.
PL
W pracy przedstawiono wpływ działania wiatru na pracę wybranych, spośród obecnych na rynku, nasad kominowych. Przedstawiono wnioski dotyczące doboru nasad w wentylacji naturalnej, perspektywy rozwoju tych urządzeń, zaproponowano ich klasyfikację.
EN
The article presents the influence wind action on few of chosen chimney caps, from available on the marketplace. The article has presented also the concluded about methodology of correct choice chimney caps to natural ventilation systems, and presented the opportunities of progress chimney caps. In the end proposed the new methodology of classification of chimney caps.
PL
W artykule przedstawiono wpływ działania wiatru na pracę wybranych, spośród obecnych na rynku, nasad kominowych. Przedstawiono wnioski dotyczące doboru nasad w wentylacji naturalnej, perspektywy rozwoju tych urządzeń, zaproponowano ich klasyfikację.
EN
The article presents the influence wind action on few of chosen chimney caps, from available on the marketplace. The article has presented also the concluded about methodology of correct choice chimney caps to natural ventilation systems, and presented the opportunities of progress chimney caps. In the end proposed the new methodology of classification of chimney caps.
PL
W artykule przedstawiono wyniki z kontynuacji wcześniej przeprowadzonych badań wywietrzaka typu „C”. Część wyników z badań tego wywietrzaka opublikowano w jednym z poprzednich artykułów [4]. Ponadto opisana została metodyka przeprowadzonych badań aerodynamicznych wywietrzaka, przedstawiono schematy stanowiska badawczego i wywietrzaka. Wyniki z badań opracowano w formie graficznej i całość podsumowano wnioskami.
EN
The article presents the results of continuing research on C-type chimney cap. Part of results from research has been published in one of previous articles [4]. The methodology of the research for aerodynamic chimney cap, diagram of the bench and schema of chimney cap are also described. The results of the research are presented in graphic form and whole research is concluded.
PL
W artykule przedstawiono wyniki z kontynuowanych badań wywietrzaka typu „A”. Część wyników z badań tego wywietrzaka opublikowano w jednym z poprzednich artykułów [4]. Ponadto opisano metodykę przeprowadzonych badań aerodynamicznych wywietrzaka, przedstawiono schemat stanowiska badawczego i schemat wywietrzaka. Wyniki z badań opracowano w formie wykresów.
EN
The article presents the results of continuing research on A-type chimney cap. Part of results from research has been published in one of previous articles [4]. The methodology of the research for aerodynamic chimney cap, diagram of the bench and schema of chimney cap are described. The results of the research are presented in graphic form and concluded.
PL
W artykule przedstawiono wyniki z badań wywietrzaka nowego typu. Jest to kontynuacja poprzednich badań prowadzonych w Katedrze Techniki Ogrzewczej i Wentylacyjnej Politechniki Łódzkiej. Opisano metodykę i zakres przeprowadzonych badań aerodynamicznych wywietrzaków, zakresy kątów napływu strugi powietrza na badany wywietrzak w płaszczyźnie pionowej i płaszczyźnie poziomej oraz zakresy prędkości strugi powietrza działającej w obrębie badanego wywietrzaka. Ponadto przedstawiono schemat stanowiska badawczego wraz z jego oprzyrządowaniem. Wyniki z badań zamieszczono w formie wykresów wraz z ilustracjami napływu strugi powietrza na badany wywietrzak. Całość opracowania podsumowano wnioskami.
EN
The article presents the results of reaserch on chosen new types of chimney caps. This is continuations of previous researches conducting at Heating Technique and Ventilation Catedry of Technical University of Lodz. The methodology and scope of research for aerodynamic chimney cap. Angle band of air jet gust for researched chimney cap in vertical and horizontal plane and scope of air jet velocity working in researched chimney area. Additionaly diagram of the bench including equipment. The results of the research are presented in graphic form including instructions on every diagram of air jet gust with right angles for researched chimney cap. Full elaboration is finished with conclusion.
14
Content available remote Badania aerodynamiczne wywietrzaków grawitacyjnych nowych typów - uzupełnienie
PL
W artykule przedstawiono wyniki z badań dwóch wywietrzaków nowych typów będących uzupełnieniem badań opublikowanych w poprzednim artykule [4]. Opisano metodykę przeprowadzonych badań aerodynamicznych wywietrzaków, schemat stanowiska badawczego i przedstawiono schematy obu typów wywietrzaków. Wyniki z badań opracowano w formie wykresów.
EN
The article presents the results of research on two chimney caps of new types, witch are supplement to published research in previous article [4]. The methodology of the aerodynamic chimney caps research, diagram of the bench and schemes of both types of chimney are described. The results of the research are presented in graphic form.
PL
W artykule przedstawiono uzupełnienie wyników z badań dwóch wywietrzaków nowych typów. Część wyników z badań opublikowano w jednym z poprzednich artykułów [4]. Ponadto opisano metodykę przeprowadzonych badań aerodynamicznych wywietrzaków, przedstawiono schemat stanowiska badawczego i schematy obu typów wywietrzaków. Wyniki z badań opracowano w formie wykresów.
EN
The article presents the results supplement of research on two new types of chimney caps. Part of results from research has been published in one of previous articles [4]. The methodology of the research for testing aerodynamic chimney caps, diagram of the bench and schemes of both types of chimney caps are described. The results of the research are presented in graphic form.
PL
W artykule przedstawiono wyniki z kontynuacji badań wywietrzaka typu "E". Część wyników z badań tego wywietrzaka opublikowano w jednym z poprzednich artykułów [5]. Ponadto opisano metodykę przeprowadzonych badań aerodynamicznych wywietrzaków, przedstawiono schematy stanowiska badawczego i wywietrzaka. Wyniki z badań opracowano w formie wykresów i podsumowano wnioskami.
EN
The article presents the results of continuing research on E-type chimney cap. Part of results from research has been published in one of previous articles [5]. The methodology of the research for aerodynamic chimney caps, diagram of the bench and schema of chimney cap are described. The results of the research are presented in graphic form and concluded.
17
Content available remote Badania aerodynamiczne wywietrzaków grawitacyjnych nowych typów
PL
W artykule przedstawiono wyniki z badań wybranych wywietrzaków nowych typów dostępnych na polskim rynku. Opisano metodykę badań aerodynamicznych wywietrzaków, schemat stanowiska badawczego oraz schematy poszczególnych rodzajów wywietrzaków. Wyniki z badań przedstawiono w formie graficznej.
EN
The article presents the results of research on chosen new types of chimney caps available on the Polish market. The methodology of the research for testing aerodynamic chimney caps, diagram of the bench and schemes of various types of chimney caps are described. The results of the research are presented in graphic form.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.