Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 3

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  chłodzenie ciągłe
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The goal of the research was to analyze the acoustic emission signal recorded during heat treatment. On a special stand, samples prepared from 27MnCrB5-2 steel were tested. The steel samples were heated to 950°C and then cooled continuously in the air. Signals from phase changes occurring during cooling were recorded using the system for registering acoustic emission. As a result of the changes, Widmanstätten ferrite and bainite structures were observed under a scanning microscope. The recorded acoustic emission signal was analyzed and assigned to the appropriate phase transformation with the use of artificial neural networks.
EN
The method of interpretation of cooling dilatograms of undercooled austenite during its transformation into upper and lower bainite (UB and LB) and into martensite (M), applied in the Laboratory of Phase Transformations of AGH University of Science and Technology in Krakow, is presented in the hereby paper. The relation of the mechanism of the mentioned above transformations to places on the dilatometric curve where transformations start and where they are continued was indicated. An appeal for the unified, correct interpretation of dilatograms of phase transformations, in all laboratories of the world, was formulated. This will allow the formation of equally accurate diagrams of the kinetics of phase transformation of undercooled austenite at its continuous cooling (CCT). In consequence, this could provide a development of more advanced heat treatment technologies. Such approach will also allow for the correct assessment of the influence of the alloying elements on the stability of austenite and phase transformation temperatures at its cooling.
PL
W pracy opisano sposób interpretacji dylatogramów oziębiania przechłodzonego austenitu w zakresie przemiany w bainit górny (UB) i dolny (LB) oraz w martenzyt (M), stosowany w Laboratorium Przemian Fazowych Akademii Górniczo-Hutniczej w Krakowie. Wskazano na związek mechanizmu każdej z ww. przemian z miejscem na krzywej dylatometrycznej (temperatura), gdzie przemiany startują i miejscem gdzie są kontynuowane. Sformułowano apel o jednolitą, poprawną interpretację dylatogramów przemian fazowych we wszystkich laboratoriach świata. Umożliwi to tworzenie jednakowo precyzyjnych wykresów kinetyki przemian fazowych przechłodzonego austenitu przy chłodzeniu ciągłym (CTPc) i w konsekwencji - tworzenie bardziej doskonałych technologii obróbki cieplnej. Pozwoli także na poprawną ocenę wpływu pierwiastków stopowych na stabilność austenitu i temperatury przemian fazowych przy jego oziębianiu.
3
Content available remote Kształtowanie struktury żeliwa sferoidalnego podczas ciągłego chłodzenia
PL
Niestopowe żeliwo sferoidalne austenityzowano w temperaturze 875 lub 1000 °C, a następnie chłodzono w sposób ciągły. Prędkość chłodzenia V800-500 mieści się w zakresie 0,026-8,82 °C/s. Sporządzono wykresy CTPc. Określono ilościowy skład strukturalny osnowy żeliwa w zależności od prędkości chłodzenia. Zinterpretowano zależność kinetyki przemiany eutektoidalnej od temperatury austenityzowania.
EN
Plain ductile cast iron first was austenitizing in temperature of 875 or 1000 °C and next it was cooling in continuous way. Coolin speeds V800-500 were in the range from 0,026 to 8,82 /s. CCT diagrams were plotted. Qualitative structural composition of cast iron matrix in the function of cooling speed was temperature of austenitizing was discussed.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.