Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Combustion Engines

2 2019

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: cetane-detergent additives

Sortuj według:

Ogranicz wyniki do:

The influence of cetane-detergent additives into diesel fuel increased to 10% (V/V) of RME content on energy parameters and exhaust gas composition of a diesel engine

Stanik Winicjusz, Cisek Jerzy

Combustion Engines

2019

R. 58, nr 4

204--209

To avoid the negative effects of increasing the amount of RME in the diesel fuel (to 10%), three different additive packages were used: stabilising, cleaning, and increasing the cetane number with different concentrations. The tests were carried out using a 4-cylinder, turbocharged 1.9 TDI engine from VW. The tests were carried out for 4 fuels (comparative fuel with a content of 7% RME and 3 test fuels with a content of 10% RME, differing in the content of the additive package. It was found that each of the 3 additive packages used does not have a significant impact on fuel consumption. However, a different effect of the tested additives on the composition of exhaust gases was observed. The first package had a slight effect on reducing the NOx concentration in the exhaust, but only for small engine loads. On the other hand, the second additive pack worked more effectively only at higher engine loads (in relation to the reduction of NOx concentration in the exhaust gases). In the third packet, the amount of the cetane additive was doubled (compared to the second packet). Then, the reduction in the NOx concentration in the exhaust gas by 3-8% was obtained with reference to the comparative fuel.

Influence of cetane-detergent additives into diesel fuel with RME content increased to 10% on the parameters of indicator diagrams and rate of heat release in a diesel engine

Stanik Winicjusz, Cisek Jerzy

Combustion Engines

2019

R. 58, nr 4

226--235

This publication is the next part of the article “The influence of cetane-detergent additives in diesel fuel increased to 10% of RME content on energy parameters and exhaust gas composition of a diesel engine”. The cause-effect analysis of the phenomena related to the impact of 3 additive packages used in diesel oil with RME content increased to 10% (compare to standard diesel fuel with 7% of RME) was described. The basis for the analysis of the impact of the tested fuels on energy parameters and composition of exhaust gases were the parameters of indicator diagrams and heat release parameters. It was found that the first set of additives affects the delay of auto-ignition of fuel and kinetic fuel combustion speed only at low engine loads. In this range of engine operation the NOx concentration in the exhaust gas is low and besides there is a large of EGR. The second additive package was operated at high engine loads but its impact on the lower self-ignition delay was quantitatively small. Therefore, in the third packet of additives, the amount of additives used in the second packet was doubled. Then a satisfactory shortening of the self-ignition delay and reduction of the max rate of kinematic heat release was achieved as a reason of a reduction of NOx concentration in the exhaust up to 8% (compared to the reference fuel).