Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 13

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  cellular systems
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
Przewiduje się, że w najbliższych latach systemy piątej generacji (5G) będą szybko rozwijającą się i dominującą technologią sieci komórkowych. Nieuniknione jest przy tym zagęszczenie sieci stacji bazowych, aby sprostać oczekiwaniom w zakresie jakości usług. Pojawiają się obawy społeczne dotyczące nowych zakresów częstotliwości oraz wypadkowego poziomu promieniowania pola elektromagnetycznego, pochodzącego od wszystkich źródeł tego promieniowania łącznie. Jednocześnie trwają już prace nad systemami 6G, które jeszcze bardziej będą się różnić od obecnych systemów pod względem wykorzystywanych zakresów częstotliwości (w tym subterahercowych) oraz szybkozmiennych charakterystyk promieniowania anten mMIMO. Będzie je cechować również inne zarządzanie widmem częstotliwości i łączami radiowymi, nieprzypominające systemów 1G/2G/3G/4G/5G, np. terminale będą się komunikować jednocześnie z wieloma punktami nadawczo-odbiorczymi (Transmit/Receive Points – TRP). Prawdopodobnie przestanie być używany termin stacja bazowa i komórka – systemy 6G bywają określane jako bezkomórkowe (Cell-Free). Użycie pasm subterahercowych i ich własności propagacyjne będą implikowały konieczność stosowania inteligentnych powierzchni odbijających (Intelligent Reflecting Surface – IRS) zarówno na zewnątrz, jak i wewnątrz budynków. To znacznie zmieni scenariusze propagacyjne i wpłynie na analizę ekspozycji. W artykule przedstawiono niektóre techniczne uwarunkowania w systemach 5G i 6G, które mogą wpływać na ocenę ekspozycji na promieniowanie pola elektromagnetycznego. Ocena wpływu fal radiowych na organizmy żywe jest domeną medycyny i nie będzie tu bezpośrednio omawiana.
EN
Fifth-generation (5G) systems are expected to be a rapidly growing and dominant mobile network technology in the coming years. It is inevitable that the network of base stations will become denser to meet expectations in terms of quality of service. As a result, there are public concerns about the new frequency ranges and the total level of electromagnetic field radiation from all sources of this radiation combined. At the same time, work is already underway on 6G systems that will differ even more from current systems in terms of the frequency ranges used (including sub-Terahertz) and the rapidly varying radiation characteristics of mMIMO antennas. They will also feature a different management of frequency spectrum and radio links that will not resemble 1G/2G/3G/4G/5G systems, e.g. terminals will be able to communicate simultaneously with multiple Transmit/Receive Points (TRPs). It is likely that the terms "base station" and "cell" will no longer be used - 6G systems are sometimes referred to as Cell-Free. The use of sub-terahertz bands and their propagation properties will imply the need for Intelligent Reflecting Surfaces (IRS) both outdoors and indoors. This will significantly change propagation scenarios and affect exposure analysis. This article presents some of the technical considerations in 5G and 6G systems that may affect the assessment of exposure to electromagnetic field radiation. Assessment of the effects of radio waves on living organisms and is the domain of medicine and will not be directly discussed here.
PL
W artykule przedstawiono koncepcję systemu do rozpoznania i zakłócania łączności radiowej, opartej na systemach komórkowych, umieszczonego na bezzałogowym statku powietrznym (BSP). Zaproponowana koncepcja, jej wstępna implementacja, wyniki z przeprowadzonych badań oraz przedstawione wnioski składają się na treść opracowania.
EN
The article presents the concept of a system for recognizing and jamming radio communication, based on cellular systems, located on an unmanned aerial vehicle (UAV). The proposed concept, its initial implementation, the results of the conducted research and the presented conclusions constitute the content of the study.
EN
The market of consumer goods requires nowadays quick response to customer needs. As a consequence, this is transferred to the time restrictions that the semi-finished product manufacturer must meet. Therefore the cost of manufacturing cannot determine how production processes are designed, and the main evaluation function of manufacturing processes is the response time to customers’ orders. One of the ideas for implementing this idea is the QRM (Quick Response Manufacturing) production organization system. The purpose of the research undertaken by the authors was to develop an innovative solution in the field of production structure, allowing for the implementation of the QRM concept in a Contract Manufacturer, which realizes its tasks according to engineering-to-order (ETO) system in conditions defined as High Mix, Low Volume, High Complexity. The object of the research was to select appropriate methods for grouping products assuming that certain operations will be carried out in traditional but well-organized technological and/or linear cells. The research was carried out in one of the largest producers of sheet metal components in Europe. Pre-completed groupings for data obtained from the company had indicated that – among the classical methods – the best results had been given by the following methods: King’s Algorithm (otherwise called: Binary Ordering, Rank Order Clustering), k-means, and Kohonen’s neural networks. The results of the tests and preliminary simulations based on the data from the company proved that the implementation of the QRM concept does not have to be associated with the absolute formation of multi-purpose cells. It turned out that the effect of reducing the response time to customer needs can be obtained by using hybrid structures that combine solutions characteristic of cellular systems with traditional systems such as a technological, linear, or mixed structure. However, this requires the application of technological solutions with the highest level of organization.
EN
The article introduces a method of performing a radio link quality assessment based on the Link Quality Indicator (LQI) which will be calculated for every system that is available. The method presented has been developed during the netBaltic project completed in Poland and generally applies to the so-called maritime zone A, i.e. the sea area where ships are still within the range of shore-based radio communication systems, particularly 3G/LTE cellular networks. The algorithm was developed based on the results of measurements obtained during two separate campaigns. That measurement data served as a basis for the method’s initial assumptions and was utilized during the method’s verification.
PL
W pierwszej czesci referatu dokonano teoretycznej analizy zasiegów uzyskiwanych przez systemy UMTS i LTE w warunkach morskich. W tym celu wyznaczono odpowiednie bilanse łacza, a nastepnie wykonano obliczenia z użyciem modeli propagacyjnych. W drugiej czesci referatu podsumowano kampanie pomiarowa zrealizowana na Bałtyku, której celem była weryfikacja zasiegów teoretycznych.
EN
In the first section of the paper, the theoretical analysis of the LTE and UMTS ranges in maritime condition has been carried out. To do so, the link budgets have been calculated and the ranges have been estimated using the relevant propagation models. In the second part of the article, the authors described a measurement campaign which was organized to verify those theoretical ranges in maritime conditions.
EN
Research of modeling urban environment channel has been presented in this paper. Measurements were performed for 2.2 GHz band. Test environment was based on existing 3G sites. Elevation, delay and azimuth spreads were analyzed. Both theoretical channel modeling and similar tests campaign were subject for analysis in this paper. Based on radio channel modeling further investigations are presented and the adaptive antenna implementation was proposed.
PL
Przedstawiono metody zwiększenia przepustowości tacza w górę w systemie komórkowym WCDMA z transmisją pakietową HSUPA. Zbadano dwie koncepcje: zastosowanie dodatkowej liczby kanałów danych E-DPDCH przez użycie dodatkowych kodów rozpraszających OVSF i optymalizację położenia wszystkich zastosowanych kodów na drzewie kodów OVSF oraz propozycję zastosowania drugiego dodatkowego ciągu skramblującego, służącego wyłącznie do transmisji kanałów E-DPDCH. Przedstawiono wyniki symulacyjne wskazujące, że w sprzyjających warunkach propagacyjnych jest możliwe zwiększenie przepustowości łącza nawet o ponad 28%, czyli około 3,2 Mbit/s.
EN
In the paper, two methods of increasing the up-link throughput in the WCDMA system with high speed packet transmission (HSUPA) has been considered. The first method relies on application of additional spreading OVSF codes used for transmission of new E-DPDCH channels and joint optimization of the use of all OVSF codes in the OVSF code tree. In the second method, an additional spreading sequence is applied used exclusively for transmission of E-DPDCH channels with spreading factor SF=1. Selected simulation results have been reported which indicate that in convenient propagation conditions the throughput gain up to around 28% equivalent to about 3.2 Mbit/s can be expected.
PL
Celem artykułu jest promocja nowych metod i narzędzi syntezy logicznej w projektowaniu układów cyfrowych dla potrzeb telekomunikacji. Omawiana jest aktualnie badana na świecie metoda dekompozycji funkcjonalnej, a w szczególności metoda dekompozycji zrównoważonej. Zgodnie z obiecującymi wynikami eksperymentów, można przypuszczać, że metody te zdominują projektowanie układów cyfrowych strukturach FPGA. Podano wiele przykładów potwierdzających skuteczność dekompozycyjnych metod syntezy w projektowaniu układów cyfrowego przetwarzania sygnałów.
EN
The main goal of this paper is to promote new logic synthesis methods and tools in digital design for needs of the telecommunications. The paper discusses functional decomposition techniques, which are currently being investigated, with special attention to the balanced decomposition method. Since technological and computer experiments with application of these techniques produce promising results, this kind of logic synthesis will probably dominate the development of digital circuits in FPGA structures. A lot of examples which confirm effectiveness of application of the decomposition method for digital signal processing systems designing are presented.
PL
Człowiek zawsze odczuwał potrzebę przesyłania wiadomości na odległość. Początkowo jednak możliwości realizacji tej potrzeby były znikome. Dopiero w XIX wieku pojawił się telegraf elektromagnetyczny (1837) i telefon (1876). Ten ostatni wynalazek, dokonany przez Grahama Bella, uważa się za pierwszy przełom w rozwoju telekomunikacji. Drugi przełom jest związany z wynalezieniem przez Guglielmo Marconiego i Aleksandra Popowa radia (lata 1895-1897). Trzeci przełom w rozwoju telekomunikacji autor tego artykułu wiąże z upowszechnieniem Internetu i systemów komórkowych.
EN
The need of sending information on distance was always present between human beings. At the beginning the possibility of practical realisation of this need was, however, very slight. The optical telegraph, invited by Chapp at end of XVIII century, was the first important achievement in the progress of telecommunications. In the years 1835-1838 Samuel Morse constructed electromagnetic telegraph. But really fast development of telecommunications started with invention of telephone by Graham Bell in the year 1876. This date is treated as the first breakthrough in telecommunications evolution. The second breakthrough is connected with invention of radio by Guglielmo Marconi and Alexander Popov (years 1895-1897). The author of his paper is convinced that the symbols of the third breakthrough in the development of telecommunications are: Internet and the cellular systems.
PL
Przedstawiono koncepcję algorytmu przydziału zasobów w bezprzewodowych systemach OFDMA wykorzystującego tzw. funkcje użyteczności do minimalizacji opóźnień przesyłanych pakietów oraz optymalizację przydziału zasobów ze względu na stan kanału w oparciu o kryterium SB (ang. Score-Based). Omówiono kryteria optymalizacji podziału zasobów ze względu na maksymalizację efektywności wykorzystania dostępnego pasma oraz wymagania dotyczące opóźnień. Zaproponowano rozwiązanie łączące oba kryteria w celu uzyskania elastycznego algorytmu. Przedstawiona koncepcja została zaproponowana jako metoda podziału zasobów w adaptacyjnym systemie komórkowym nowej generacji WINNER.
EN
In the paper a proposal of scheduling algorithm for wireless adaptive OFDMA system has been presented. The idea of utility functions has been employed to fulfill the delay requirements of transmitted data. Selected resources allocation criteria has been described and a scheduling algorithm maximizing the system spectral efficiency and minimizing the delay has been proposed for use in next generation wireless system - WINNER. The presented scheduler is based on modified Score-Based criterion to optimize the spectral efficiency and fairness of considered system.
PL
Opisano proponowane modyfikacje systemu komórkowego trzeciej generacji UMTS, które zostaną wprowadzone w perspektywie kilku następnych lat, znane pod nazwą 3GPP LTE (Long Term Evolution). Po przedstawieniu procesu standaryzacji systemu UMTS opisano zasadę działania i strukturę warstwy fizycznej systemu LTE zarówno w łączu "w dół" jak i w łączu "w górę." Przedstawiono również proponowane modyfikacje architektury sieciowej.
EN
The paper is devoted to description of modifications of 3GPP UMTS system which are going to be introduced in the perspective of a few years. They are known as 3GPP LTE (Long Term Evolution). After presentation of the UMTS standardization process, the LTE physical layer and its functioning are described both for downlink and uplink. Proposed modifications of the system architecture (SAE - System Architecture Evolution) are also tackled.
12
Content available Modelling of CDMA systems
EN
This paper describes a model of a system with wideband CDMA that is a proposal of user access for future UMTS. This model has been implemented using OPNET tool. The model enables network architecture, radio interface, mobile station motion, call generation, signalling, etc. The examples of simulation results of call and handover blocking probability are also presented in this paper.
13
Content available remote Modelling of wideband DS-CDMA system
EN
This paper describes a model of a system with widebands DS-CDMA technique that is a proposal of user access for future UMTS. This model has been implemented using OPNET simulation tool. The model consists of following elements: network architecture, radio interface, mobile station motion and call generator signalling procedures, etc. The examples of simulation results covering calls and handover probabilities versus incoming traffic are presented in this paper.
PL
W pracy przedstawiono model szerokopasmowego systemu radiokomunikacyjnego z roapraszaniem widma DS-WCMA zaimplementowany z wykorzystaniem profesjonalnego narzędzia symulacyjnego OPNET. Zbudowany model składa się między innymi z takich elementów jak: moduły architektury sieci i interfejsu radiowego, moduły generacji mobilności abonentów ruchomych, generatora ruchu, procedur sygnalizacyjnych, algorytmów alokacji kanałów. W pracy przedstawiono także przykładowe wyniki symulacji symulacji pokazujace zależności prawdopodobieństwa blokady wywołań oraz przełączeń (handover) w funkcji natężenia ruchu w komórce.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.