Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 18

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  blood pressure
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
W artykule przedstawiono wybrane parametry życiowe człowieka wraz z urządzeniami umożliwiającymi ich pomiar. Następnie przedstawiono systemy przesyłania informacji wokół systemu badania parametrów życiowych człowieka. Zwrócono uwagę na potrzebę zastosowania wielu technologii w celu zapewnienia kompatybilności na wielu poziomach. W dalszej części przedstawione zostały przykładowe anteny które znajdą zastosowanie wokół sieci sensorycznej, po czym został przedstawiony projekt anteny tekstylnej mogącej zostać użytej na poziomie sensor-centrala wraz z charakterystykami opisującymi jej parametry.
EN
The paper presents selected human vital parameters along with devices that enable their measurement. Then, the information transmission systems around the human vital parameters study system are discussed. The need for multiple technologies to ensure compatibility at multiple levels has been highlighted. Further on, examples of antennas that will be used around the sensory network are presented, and then a design of a textile antenna that can be used at the sensor-control panel level was presented, along with the characteristics describing its parameters.
PL
W artykule opisano podstawowe parametry życiowe człowieka takich jak: tętno, temperatura ciała, poziom napięcia mięśniowego, oddech i ciśnienie krwi. W artykule przedstawiono schemat blokowy oraz ideowy systemu monitorującego parametry życiowe wraz z algorytmem oprogramowania urządzenia. Przedstawiono przykładowe wyniki pomiarów.
EN
The article describes basic human life parameters such as: heart rate, body temperature, muscle tension, breathing and blood pressure. The article presents a block diagram and electrical diagram system for monitoring vital parameters along with the device software algorithm. Sample measurement results are presented.
PL
Sztuczne sieci neuronowe stanowią obszerny zbiór zagadnień, które mogą być użyte w wielu dziedzinach nauki. Bardzo popularnym ich zastosowaniem jest przetwarzanie i kategoryzacja obrazów. W artykule tym opisano w jaki sposób wykonano i przebadano praktyczną realizację klasyfikatora obiektów z użyciem tychże sieci. Opisany został problem klasycznego detektora obiektów, który następnie posłużył do przygotowania bazy treningowej, ale również jako składowa ostatecznej implementacji algorytmu. Przedstawiono również w jaki sposób przygotowane zostały dane treningowe użyte do wyszkolenia sieci oraz w jaki sposób została wybrana architektury sieci neuronowej. W ostatniej części przedstawiono wyniki przeprowadzonych badań. Wskazano zaobserwowane wady i zalety takiego podejścia do rozwiązania problemu.
EN
Neural networks are very broad research issue, they find their way into many fields of science. Probably their most popular implementation is met in image processing and classification. This paper describes how to practically implement such classifier based on neural networks. First part describes classical object detector, used later to build a training data set, but also as a part of final product used to process images. Paper describes how aforementioned data set was prepared and how architecture of neural network has been chosen. In the last part there are result of run tests, as well as pros and cons of such solution to the problem.
EN
The aim of the research was to evaluate the occurrence of arrhythmias and heart rate variability during diving in recreational divers. Continuous electrocardiographic (ECG) Holter monitoring was conducted in a group of 50 divers (age 36,8 } 8,7). The recorded data included the duration of the dive, including a period of 60 minutes before the dive and 60 minutes after the dive. Moreover, divers filled in a questionnaire that had been prepared for the purpose of the study and the psychological tests State-Trait Anxiety Inventory (STAI). The ECG recordings were synchronised with dive computers to correlate the ECG changes with diving events and analysed for the heart rate, arrhythmias and conduction disorders. The average heart rate was the highest (M=107.34 beats/minute) before diving, and the lowest after diving (M = 102.00 beats/minute). Supraventricular arrhythmias were recorded in nineteen (38%) of the participants of the study. The number of arrhythmias during diving (M = 14,45) is significantly higher than before (M = 9,93, p < 0,01) and after dive (M = 6,02, p < 0,05). All results were obtained from the continuous ECG Holter monitoring. It seems that using continuous ECG monitoring in conditions similar to diving (physical and psychological stress), brings more benefits than traditional, resting electrocardiogram.
EN
The process of rehabilitation after heart disease is a major problem today. Existing mathematical model is phenomenological. This paper presents a mathematical model of the heart rate and pressure under the influence of physical activity. The identification of the presented model based on the modified gradient Levenberg-Markvadt method supplemented with the procedure of initial ratios choice is introduce for the first time.
PL
Ciśnienie tętnicze krwi to jeden z najważniejszych parametrów charakteryzujących czynność układu sercowo-naczyniowego. Współcześnie stosowanych jest kilka metod pomiaru ciśnienia tętniczego krwi. Polegają one na inwazyjnym (śródtętniczym), ciągłym pomiarze bądź pośrednim zapisie ciśnienia krwi – za pomocą metod nieinwazyjnych. Monitor CNAP 500 (CNAP – Continuous Noninvasive Blood Pressure Monitoring) służy do nieinwazyjnego pomiaru ciśnienia tętniczego krwi. Umożliwia ciągłe – w trybie beat-to-beat (na każdy cykl pracy serca) – monitorowanie ciśnienia krwi i tętna w czasie nawet do 24 godzin. Celem pracy jest krótki przegląd danych literaturowych opisujących zalety nieinwazyjnego monitorowania ciśnienia krwi.
EN
Blood pressure is one of the basic parameters of the cardiovascular system. There are several methods of blood pressure monitoring: non-invasive and invasive ones. CNAP Monitor 500 (CNAP – Continuous Noninvasive Blood Pressure Monitoring) is a standalone device dedicated to non-invasive blood pressure monitoring. The cardiovascular parameters are monitored continuously beat-to-beat up to 24 hours. The aim of this work is a short overview presenting advantages of noninvasive blood pressure monitoring.
EN
Objectives. The aim of this study was to investigate the circadian adaptation of tcr (core body temperature), BP (blood pressure), HR (heart rate) and subjective sleep quality after 7 days of working 12-h night shifts in offshore fleet workers. Methods. Night workers (N = 7) (18:00–6:00) and day workers (N = 7) (6:00–18:00) were recruited from a Norwegian offshore company operating in the North Sea. We measured tcr, BP and HR on days 1 and 7. Results. An increase of 0.6 oC (p = .03) was observed within the group of night workers from day 1 to day 7. Between the night and day workers there was a significant difference of 0.6 oC from day 1 to day 7 (p = .01). Sleep latency and sleep length also showed significant differences between the groups (p = .01 and p = .04). There was an interaction effect in tiredness during the shift (p = .02). Conclusion. The significant increase in tcr indicates an adaptation in the night workers to the new working schedule, and the extended working hours and sleep deprivation are hypothesized to be the main cause of the increased tcr. Light exposure, altered pattern of food availability and physical activity are likely to have contributed as well. Subjective sleep quality showed inconclusive results.
8
Content available remote Wybór metod pomiarowych dla diagnostyki sztucznego serca
PL
W niniejszym artykule zamieszczono analizę metod pomiarowych, możliwych do zastosowania w protezach sztucznego serca POLVAD (Polish Ventricular Assistant Device). Mechaniczne protezy służące do wspomagania serca rozwijane w Fundacji Rozwoju Kardiochirurgii w Zabrzu mają za zadanie wspomagać leczenie mięśnia sercowego u pacjentów ze zdiagnozowanymi chorobami serca i układu krwionośnego. Zastosowanie protezy wspomagającej pracę serca pozwala na znaczne przyspieszenie leczenia. Artykuł opisuje zagadnienia związane z wyborem bezinwazyjnej metody pomiarowej pozwalające na określenie ciśnienia krwi w określonych miejscach protezy sztucznego serca. Warunkiem koniecznym, jaki musi spełnić układ pomiarowy, jest całkowita separacja czujnika od środowiska krwistego. Wynika to z potrzeby unikania destrukcji składników krwi oraz powstawania zakrzepów. W pracy opisano dwie możliwe metody pomiarowe - systemy zbudowane przy wykorzystaniu folii piezoelektrycznej oraz metod optycznych.
EN
Methods for pressure measurement to be used in the POLVAD artificial heart prostheses are described in this paper. The mechanical prostheses used for heart support are developed by the Foundation of Cardiac Surgery Development in Zabrze. Their main purpose is to aid the heart muscle recovery of patients with cardiac problems. Use of the POLVAD prosthesis speeds up the healing process. The paper covers the recent research into the possible pressure sensing methods for use in the noninvasive blood pressure measurement in required places around the prosthesis. The main requirement for the developed methods is lack of contact with blood to avoid the destruction of blood elements and minimise influence on the blood flow. Two sensing methods are presented: one based on a fiber pressure sensor, the other on piezoelectric pressure measurements. The preliminary results are included, and choice of the best method for future development is pointed out.
PL
Wstęp Celem pracy jest określenie mechanizmu zmian ciśnienia tętniczego krwi pod wpływem pola magnetycznego niskiej częstotliwości o parametrach stosowanych w magnetoterapii u zwierząt doświadczalnych. Materiał i metody Materiałem badawczym były zwierzęta - szczury rasy Wistar. Zwierzęta poddane były działaniu pola magnetycznego niskiej częstotliwości o parametrach: częstotliwość 40 Hz, indukcja 7 mT, kształt pola prostokątny, czas ekspozycji 20 min. W celu określenia mechanizmu wpływu pola magnetycznego na ciśnienie tętnicze krwi, badanym zwierzętom (będącym w narkozie) podano dożylnie propranolol (bloker receptorów beta-adrenergicznych), siarczan atropiny (bloker receptorów muskarynowych) oraz indometacynę (inhibitor syntetazy prostaglandynowej PGE2) i wykonano pomiar ciśnienia tętniczego krwi (SP) metodą bezpośrednią w czasie "O" przed rozpoczęciem ekspozycji i w 5. minucie po zakończeniu ekspozycji. Wyniki i wnioski Pole magnetyczne niskiej częstotliwości o parametrach stosowanych w magnetoterapii powoduje znamienne obniżenie ciśnienia tętniczego krwi zwierząt doświadczalnych. Podanie dożylne blokerów receptorów beta-adrenergicznych, muskarynowych i syntetazy prostaglandynowej nie wpływa istotnie na zmianę ciśnienia tętniczego krwi zwierząt podczas stosowania pola magnetycznego niskiej częstotliwości, co sugerować może, że zmiana ciśnienia tętniczego krwi nie odbywa się za pośrednictwem tych receptorów.
EN
Background Main goal of our study was analysis of the mechanism of experimental animals' blood pressure changes due to exposure to low magnetic field. Material and methods The examination was carried out on rats, which were subjected to the activity of low magnetic field: f=40 Hz, B=7 mT, exposure time 20 min. We studied the changes of animals' blood pressure after injection of propranolol, athropine sulfate and indomethacine under influence of low magnetic field. Results and conclusions The low magnetic fields used in magnetotherapy caused the statistically decrease of experimental animals' blood pressure. After application of the beta receptors blocker, the muscarin blocker, the prostaglandin synthetasis blocker and activating of low magnetic field, the blood pressure decreased, but it is not statistically significant. Probably, the blood pressure changes due to magnetic field are not dependent on the activity of these these receptors.
10
Content available remote Metody wyznaczania krzywej oscylometrycznej
PL
W pracy zaprezentowano i porównano kilka metod do wyznaczania obwiedni amplitudowej sygnału reprezentującego oscylacje ciśnienia mankiecie okluzyjnym podczas deflacji. Wykazano, ze proponowana metoda bazująca na interpolacji wielomianem umożliwia wyznaczenie obwiedni badanego sygnału z dużą dokładnością, co w znacznym stopniu wpływa na końcowy wynik pomiaru.
EN
This paper deals with some problems of digital signal processing occurring during arterial blood pressure measurement using the oscillometric method. The amplitude envelope of pressure oscillations was estimated by various methods (i.e. the average energy or the average amplitude, and the Hilbert transform). The polynomial interpolalion was proposed for creating the oscillometric curve. The results suggested that this method was superior in estimating the signal envelope.
EN
This paper evaluates blood pressure measurements by the electronic palpation method (EP) and compares their accuracy to that of the oscillometric method (OSC) using average intra-arterial (IA) blood pressure as a reference. All of these three measurements were made simultaneously for each patient. The EP method, based on noninvasively detecting the amplitude of pressure pulsations in the radial artery, differs from the ordinary palpation method by allowing also diastolic pressure to be determined from the pulse delay produced by cuff pressure. In one test group, measurements were conducted on healthy volunteers in sitting and supine position during increasing and decreasing cuff pressure. Another group, comprising older, cardiac patients, was measured only in the supine position during cuff inflation. The results showed that the EP method was approximately as accurate as the OSC method with the healthy subjects and slightly more accurate with the cardiac patient group. The advantage of the EP method is that also the wave shape and velocity of arterial pressure pulses is available for further analysis like the assessment of arterial stiffness. Keywords: noninvasive, blood pressure, cuff, pulse transit time, pulse wave velocity
12
Content available remote Miernik akwizycji danych przy pomiarze ciśnienia tętniczego
PL
Przedstawiono charakterystykę i możliwości funkcjonalne elektronicznego miernika, opracowanego do pomiarów ciśnienia tętniczego metodą oscylometryczną lub opcjonalnie, do testowania medycznych mierników ciśnienia w zakresie 0-300 mm Hg. Miernik jest wspomagany mikrokontrolerem, współpracującym z komputerem typu PC. Urządzenie można z powodzeniem użytkować w dużych przychodniach, gdzie konieczność pracy z licznymi pacjentami wymaga automatyzacji sporządzania protokołu pomiarowego oraz archiwizacji wyników pomiarowych (bazy danych).
EN
The characterization and functional possibilities of the electronic device, for measurement of blood preasure by oscillometric or for testing medical tonometers in the range 0-300 mm Hg is presented. The device has microcontroller with co-operative wich can work with a computer. It may be used in clinics, where the necessity of the work with numerous patients demands the automatization of preparing of the measuring - official record and archiving of measuring data.
EN
This work presents new possibilities for interpreting blood pressure measurements of children and adolescents with the use of Internet. A dynamic web site allows for such interpreting and archiving blood pressure measurements in developmental age. Stored measurements results can become a basis for national pressure norm considering specificity of development of Polish children and adolescents. The interpretation system of blood pressure measurements in developmental age can be used both at school and home
EN
This study describes an experimental investigation where cardiovascular response was measured for a range of stimuli. The aim was to obtain relationships between stimuli and physiological variables that could be implemented in a general control system where the appropriate stimulus is selected for a desired test. Reaction time (Tr), blood pressure (BP) and heart rate (HR) were measured in 14 first-year aviation students (10 males, 4 females, age 19-23 years) during different types of computer-based tests : visual, auditory, mathematical. For all test responses across all subjects mean BP increased in 95%, HR increased in 66%. Both BP and HR increased concomitantly in 61% of responses. Average Tr was 583msec (visual), 477msec (auditory) and 10.3 sec (math). There was also a positive relation between BP, HR and Tr. A difference in these parameters was also seen between males and females. Findings of this study show that response to stress results in increased BP but not HR for all subjects studied. This indicates that short-term regulatory mechanisms of BP and HR are manifest only in some subjects some of the time for similar stimuli. These results can be used to implement an assessment procedures and test response criteria in an automated system for testing young student pilots.
15
Content available remote Measurement of tissue pressure with symptoms of compartment syndrome
EN
The increase in the tissue pressure (TP) in the compartment can be due to the internal pressure (contusion, swelling, inflammation), or due to the external pressure (tight bandage, pneumatic splint). Injury and a deep thrombosis of a blood vessel lead to the stasis and subsequently to the lowering of arterial-venous gradient just the same as this associated with lowering of arterial medium pressure due to the shock with the excessive positioning of the extremity. Our aim was to establish the value of TP and thus to prevent the symptoms of the compartment syndrome. Tte above-mentioned problem can be solved by measuring the tissue pressure in a real time, where the approximation of an invasive and a non-invasive pressure is proved by a comparative measurement.
EN
The article presents conditions of measurement time optimization during cuff inflation, in oscillometric method of blood pressure measurement, assuring most efficient reading at each measurement attempt. The optimization focuses on setting of final pressure, which value is unknown when the measurement begins. Also the time of cuff deflation is optimized by choosing specific deflation method and forming of oscillometric curve in presence of noise in the signal. Apart from that the article presents the process of finding the criterion used for systolic and diastolic pressure estimation. The criterion refers to maximum oscillation amplitude. In the end there are described statistical requirements for accuracy of pressure measurement and a form in which validation results are presented.
PL
W terapii pacjentów z zespołami bólowymi kręgosłupa stosuje się zabiegi magnetoterapii i magnetostymulacji. Autorzy ocenili wpływ tej terapii na ciśnienie tętnicze krwi w grupie 64 pacjentów z zespołami bólowymi kręgosłupa i współistniejącą chorobą nadciśnieniową. Uzyskane wyniki wskazują na efekt hipotensyjny zabiegów magnetostymulacji.
EN
In therapy patients with back pain syndromes are used measures of magnetotherapy and magnetostimulation. In this study a trial was made to estimate the influence of this therapy in a group of 64 patients with back pain syndromes and hypertensive disease. The obtained data proved that there is a hypotension effect after magnetostimulation.
EN
Computational modelling of stress and strain states in artery walls is realized on an example of aorta, modelled as a cylindric body, consisting of one or two homogeneous coaxial layers with constant thickness, and showing finite distortions under physiologic load. The material of each layer is modelled as an isotropic non-linear elastic continuum with a negligible compressibility. The model solved using finite element method is loaded, in addition to the blood pressure, by axial prestretch according to conditions in a human body, and includes residual stresses, as well.
PL
Komputerowe modelowanie stanów odkształcenia i odkształcenia w ściankach arterii pokazano na przykładzie aorty, zamodelowanej jako walec składający się z jednej lub dwóch jednorodnych, współosiowych warstw o stałej grubości i wykazujących niewielkie zaburzenie pod wpływem obciążenia fizjologicznego. Materiał każdej warstwy zamodelowano jako nieliniowe, izotropowe continuum o pomijalnej ściśliwości. Model rozwiązano wykorzystując metodę elementów skończonych przy obciążeniu ciśnieniem krwi i promieniowymi napięciami wynikającymi z budowy ciała ludzkiego. Uwzględniono również naprężenia resztkowe.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.