Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 100

Liczba wyników na stronie
first rewind previous Strona / 5 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  balkon
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 5 next fast forward last
PL
W artykule przedstawiono temat kompleksowego remontu i modernizacji balkonów i loggii w budynkach wykonanych w technologii prefabrykowanej wielkopłytowej. Poruszono kwestię zużycia technicznego i funkcjonalnego oraz kwestię konieczności prowadzenia właściwej polityki remontowej dotyczącej tych charakterystycznych zewnętrznych części budynków. Zwrócono uwagę na problem braku dostępności do balkonów i loggii dla osób poruszających się na wózku. Przeanalizowano możliwości i sposoby prowadzenia działań naprawczych i modernizacyjnych przy zachowaniu istniejącego ustroju nośnego, a także możliwości i sposoby wprowadzenia nowej konstrukcji dostawnej lub podwieszanej.
EN
The article presents the topic of comprehensive renovation and modernization of balconies and loggias in buildings made using prefabricated large-panel technology. The issue of technical and functional wear and tear was raised, as well as the need to conduct an appropriate renovation policy regarding these characteristic external parts of buildings. Attention was drawn to the problem of inaccessibility to balconies and loggias for people in wheelchairs. The possibilities and methods of carrying out repair and modernization activities while maintaining the existing load-bearing structure were analyzed, as well as the possibilities and methods of introducing a new add-on or suspended structure.
PL
W artykule opisano wyniki analizy i optymalizacji wybranych parametrów węzła połączenia płyty balkonowej ze ścianą na podstawie modeli matematycznych. Wyniki opierają się na poprzednim badaniu – ocena istotności wpływu 15 różnych czynników, charakteryzujących parametry tego węzła, z których sześć zostały zakwalifikowane jako istotne. W niniejszym badaniu dla istotnych czynników opracowano modele matematyczne zależności temperatury ϑimg (funkcja Y1) w miejscu występowania najniższej temperatury w analizowanym węźle oraz liniowego współczynnika przenikania ciepła ψim (funkcja Y2) mostka termicznego, występującego w tym miejscu, od czynników: X1 – grubość izolacji termicznej górnej części płyty balkonowej; X2 – grubość izolacji termicznej dolnej części płyty balkonowej; X3 – grubość izolacji termicznej górnej części stropu wewnątrz budynku; X4 – grubość izolacji termicznej ściany zewnętrznej; X5 – współczynnik przewodzenia ciepła izolacji termicznej ściany zewnętrznej; X6 – grubość płyty balkonowej. Na podstawie wyników eksperymentu obliczeniowego, uzyskanych na drodze symulacji z wykorzystaniem oprogramowania THERM 7.6 opracowano deterministyczne modele matematyczne tych zależności. Modele pozwoliły oszacować stopień i charakter wpływu badanych czynników na temperaturę ϑimg i liniowy współczynnik przenikania ciepła ψim oraz przeprowadzić optymalizację parametrów. Informacja może być przydatna dla naukowców, inżynierów i decydentów, przy podejmowaniu prawidłowych decyzji na etapie projektowania nowych budynków mieszkalnych.
EN
The article describes the results of the analysis and optimization of selected parameters of the junction between the balcony slab an he wall based on a mathematical model. The results are based on a previous study after assessing the significance of the influence of 15 different factors characterizing the parameters of this node, from which 6 significant ones were selected. In this study, mathematical models of the dependence of the temperature ϑimg (function Y1) at the location of the lowest temperature in the analyzed node and the linear heat transfer coefficient ψim (function Y2) of the thermal bridge occurring in this location on the following factors were developed for important factors: X1 – thermal insulation thickness the upper part of the balcony slab; X2 – thickness of thermal insulation of the lower part of the balcony slab; X3 – thickness of thermal insulation of the upper part of the ceiling inside the building; X4 – thickness of thermal insulation of the external wall; X5 – thermal conductivity coefficient of external wall thermal insulation; X6 – thickness of the balcony slab. Based on the results of the computational experiment obtained by simulation using THERM 7.6 software, deterministic mathematical models of these relationships were developed. The models made it possible to estimate the degree and nature of the influence of the studied factors on temperature ϑimg and linear heat transfer coefficient ψim, and optimize the parameters. The information may be useful for scientists, engineers and decision-makers when making correct decisions at the stage of designing new residential buildings.
3
Content available remote Balkony z warstwą użytkową z powłok żywicznych
Izolacje
|
2024
|
T. 29, nr 5
135--138, 140--144
PL
W artykule opisano specyfikę projektowania i wykonania balkonów z warstwą użytkową wykonaną z powłok żywicznych. Na ilustracjach pokazano przykładowe balkony z warstwą żywiczną. Zwrócono uwagę na detale wykonawcze. Wymieniono najważniejsze cechy i właściwości powłok żywicznych.
EN
The article describes the specifics of designing and constructing balconies with a top layer made of resin coatings. Illustrations showcase sample balconies with resin layers, emphasizing the execution details. The article lists the key characteristics and properties of resin coatings.
PL
Balkony, w eksploatowanych 60-letnich budynkach wielorodzinnych, znajdujących się pod ochroną konserwatorską budzą zastrzeżenia, a wiele z nich, według okresowych przeglądów budynków, jest w stanie awaryjnym [1]. Straciły funkcjonalność, gdyż się zużyły [2], choć większego znaczenia nabrały w czasie izolacji społecznej wynikającej z pandemii. Zaproponowano schemat zakresu badań przedprojektowych dotyczący oceny stanu zachowania balkonów w budynkach będących pod opieką konserwatorską i określono wariant dalszego działania naprawczego dla zarządcy.
EN
Balconies in operated 60-year-old multi-family buildings under conservation protection raise concerns, and many of them, according to periodic inspections of buildings, are in a state of emergency [1]. They lost their functionality as they wore out [2], although they became more important during social isolation resulting from the pandemic. A scheme of the scope of pre-design research was proposed for assessing the state of preservation of balconies in buildings under conservation care, and an option further corrective action for the manager was identified.
PL
W artykule przedstawiono wyniki analizy istotności wpływu parametrów węzła połączenia płyty balkonowej ze ścianą na pole temperatur w strefie powstającego mostka termicznego. Węzeł składa się z dużej liczby elementów, które mają zróżnicowane wartości współczynnika przewodzenia ciepła, wymiary geometryczne i lokalizację odnośnie do wewnętrznej powierzchni ściany zewnętrznej. Najbardziej zagrażającymi miejscami są górne i dolne narożniki, utworzone ze stropem i ścianą zewnętrzną. Po analizie charakterystyk fizyko-technicznych i geometrycznych elementów wybranego węzła wyodrębniono 12 czynników (X i ), które mogą mieć wpływ na pole temperatur ściany zewnętrznej. Oceniono istotność wpływu wybranych czynników (X i ) na temperaturę powierzchni wewnętrznej w narożniku górnym, przyjętej jako funkcja celu Y1, oraz w narożniku dolnym, przyjętej jako funkcja celu Y2. Do oceny istotności zastosowano eksperyment obliczeniowy z planowaniem Placketta-Burmana na N=16 prób. Na podstawie wyników obliczeń temperatur Y1, Y2 określono współczynniki istotności dla wybranych czynników. Po analizie istotności czynników ustalono, że temperatura Y2 (ϑimd) na wewnętrznej powierzchni ściany zewnętrznej na styku z dolną częścią stropu jest krytyczna w rozpatrywanym węźle. Okazało się, że wśród wybranych 12 czynników istotny wpływ na temperaturę Y2 (ϑimd) wykazuje sześć czynników, a pozostałe czynniki mają wpływ nieistotny. Przy optymalizacji parametrów rozpatrywanego węzła według kryterium temperaturowego należy uwzględniać wytypowane czynniki istotne. Informacja może być przydatna dla naukowców, projektantów i technologów w budownictwie.
EN
The article presents the results of the analysis of the significance of the influence of the parameters of the connection node of the balcony slab with the wall on the temperature field in the zone of the emerging thermal bridge. The node consists of a large number of elements that have different values of the heat conduction coefficient, geometric dimensions and location relative to the inner surface of the outer wall. The most threatening places are the upper and lower corners, formed by the ceiling and the outer wall. After analyzing the physical, technical and geometric characteristics of the selected node, 12 factors (X i ), were identified that can affect the temperature field of the outer wall. The significance of the influence of selected factors (X i ), on the internal surface temperature in the upper corner, taken as a function of the target Y1, and in the lower corner, taken as a function of the target Y2 was assessed. A computational experiment with Plackett-Burman planning on N=16 samples was used to assess the significance. Based on the results of calculations of temperatures Y1, Y2 the significance factors for the selected factors are determined. After analyzing the significance of the factors, it was determined that the temperature Y2 (ϑimd) on the inner surface of the outer wall in contact with the ceiling from the bottom of the ceiling is critical at the node under consideration. It turned out that among the selected 12 factors, six factors have a significant effect on the temperature of Y2 (ϑimd) the remaining factors have an insignificant effect. When optimizing the parameters of the node under consideration according to the temperature criterion, the selected important factors should be taken into account. The information can be useful for scientists, designers and technologists in construction.
6
Content available remote Odprowadzanie wody z połaci balkonów i tarasów. Wybrane zagadnienia
PL
Artykuł porusza kwestię prawidłowego odprowadzania wody z połaci balkonów i tarasów. Autor omawia różne warianty: w układzie drenażowym, z tarasów naziemnych. Podpowiada też jak zapobiegać przeciekom z balkonów i tarasów.
EN
The article deals with the issue of proper drainage of water from the slopes of balconies and terraces. The author discusses various variants: in a drainage system, from above-ground terraces. He also suggests how to prevent leaks from balconies and terraces.
7
Content available remote Naprawa balkonu – etapy prac i materiały
PL
Artykuł porusza kwestie naprawy balkonu. Autor omawia etapy prac naprawczych. Zwraca uwagę na konieczność ustalenia przyczyn uszkodzeń, ponieważ tylko dokładne oględziny umożliwią dobranie właściwych metod naprawczych.
EN
The article deals with the issues of repairing a balcony. The author discusses the stages of repair work. He draws attention to the need to determine the causes of damage, because only a thorough inspection will enable the selection of appropriate repair methods.
8
Content available remote Balkony z warstwą użytkową z powłok żywicznych
PL
W artykule opisano specyfikę projektowania i wykonania balkonów z warstwą użytkową wykonaną z powłok żywicznych. Na ilustracjach pokazano przykładowe balkony z warstwą żywiczną. Zwrócono uwagę na detale wykonawcze. Wymieniono najważniejsze cechy i właściwości powłok żywicznych.
EN
The article describes the specifics of designing and constructing balconies with a top layer made of resin coatings. Illustrations showcase sample balconies with resin layers, emphasizing the execution details. The article lists the key characteristics and properties of resin coatings.
EN
The expected intensification of thermal modernizations due to the European Union requirements related to the reduction of CO2 emissions is a chance to reflect on potentiality of adaptation apartments in tenements to the current users’ needs and expectations. One of the elements improving living quality is a properly designed access to private outdoor space such as balconies. Urban typology potentially allows extending tenements’ backyard elevations with balconies. Nevertheless, these actions are not taken due to numerous limitations, i.a. because of an irregular elevations’ building line inside the quarters. The research aims to indicate the spatial conditions that would allow adding balconies to backyard elevations within the context of Polish technical regulations. The article focuses on regulations regarding obscuring and overshadowing the building and the impact of balconies’ additions on apartments’ indoor daylight. The research was conducted based on following methods: the desktop study of relevant regulations about minimal distances regarding obscuring and overshadowing the buildings, urban analysis presenting the typologies of inner-quarter elevation building line and daylight simulations of Daylight Factor and illuminance unveiling the balcony addition’s impact on interior daylight were conducted to reply these questions. The results are schedules of situations in tenements’ courtyards, where an addition would be difficult or impossible indicating minimal distances requirements and of balconies’ impact on indoor daylight depending on their forms and solar orientations. The study demonstrates that the Polish requirements are insufficient tool for indoor daylight preservation. The simulations conducted on the cases demonstrate that adding a balcony to the South, West and East elevations the illuminance does not lower the interior daylight below 300 lux, what is considered as a minimum level. What’s more, balcony may reduce daylight illuminance, where it exceeds 3000 lux and may cause an unwelcome glare effect. However, further research is necessary to investigate the Polish insolation regulations and proper add-on balcony design as an element enhancing apartment adaptability to different climate seasons.
PL
Spodziewana intensyfikacja termomodernizacji wynikająca z wymogów Unii Europejskiej dotyczących ograniczenia emisji CO2 jest okazją do podjęcia refleksji nad potencjałem dostosowania lokali mieszkalnych w kamienicach do aktualnych potrzeb i oczekiwań użytkowników. Jednym z elementów architektonicznych wpływających pozytywnie na jakość przestrzeni mieszkalnej jest dostęp do dobrze zaprojektowanej prywatnej przestrzeni zewnętrznej takiej jak np. balkon. Kwartałowa zabudowa kamienic potencjalnie umożliwia dostawienie zewnętrznych balkonów do tylnych elewacji. Niemniej działania takie nie są podejmowane ze względu na liczne ograniczenia m.in. przestrzenne związane z nieregularną linią zabudowy wnętrz kwartałów. Celem badania jest wskazanie, na przykładzie Wrocławia, jakie warunki przestrzenne muszą być spełnione, aby umożliwić dostawienie balkonów do podwórkowej elewacji kamienic w ramach polskich przepisów prawa budowlanego. W artykule skupiono się na przepisach dotyczących przesłaniania i zacieniania budynków oraz na wpływie dostawienia balkonów na doświetlenie mieszkań światłem dziennym. Badania przeprowadzono na podstawie analizy warunków technicznych pod względem minimalnych odległości wynikających z zacieniania i przesłaniania budynków, analiz urbanistycznych systematyzujących typologię linii zabudowy elewacji kamienic wewnątrz kwartału oraz komputerowych symulacji pomiaru Daylight Factor i natężenia światła dziennego pokazujących wpływ dostawienia balkonu na zacienianie mieszkania. Rezultatem jest zestawienie typologii sytuacji w kwartałach kamienic, gdzie dobudowanie byłoby utrudnione lub niemożliwe, ze wskazaniem wymaganych minimalnych odległości, oraz przedstawienie wpływu dostawienia balkonu na doświetlenie mieszkania w zależności od kierunków świata i formy balkonu. Badania potwierdzają, że polskie warunki techniczne nie są wystarczającym narzędziem do zapewnienia odpowiedniego poziomu światła dziennego. Symulacje przeprowadzone na przykładach wykazały, że dodanie balkonu do południowej, zachodniej i wschodniej elewacji nie zaniża średniego poziomu natężenia światła poniżej poziomu 300 luksów, który jest uważany za minimalny. Ponadto balkon może niwelować poziom natężenia światła powyżej 3000 luksów, który może wywołać niechciany efekt olśnienia. Wymagana jest dalsza analiza biorąca pod uwagę polskie wymogi nasłonecznienia oraz badania mające na celu określenie odpowiedniego projektu balkonów, który wspomoże adaptację mieszkań do pór roku.
10
Content available remote Uszkodzenia i naprawy balkonów i galerii wspornikowych
PL
W artykule przedstawiono przyczyny uszkodzeń oraz sposoby naprawy balkonów i galerii wspornikowych o różnej konstrukcji i różnym okresie użytkowania. Na podstawie badań stwierdzono, że głównymi przyczynami uszkodzeń były błędy wykonawcze oraz projektowe, a także niewłaściwe użytkowanie i zaniedbania remontowe. Podano sposoby napraw umożliwiające poprawę stanu technicznego i bezpieczne użytkowanie balkonów i galerii.
EN
In the paper the causes of damage and the repair methods of cantilever balconies and galleries are presented. Based on the research, it was found that the main causes of damage were poor workamanship and design errors as well as improper use and neglect of renovation. The repair methods to enable the improvement of the technical condition and safe use of cantilever balconies and galleries were given.
11
Content available remote Możliwości modernizacji części zewnętrznych budynków wielkopłytowych
PL
W artykule poruszono temat modernizacji części zewnętrznych budynków wykonanych w technologii prefabrykowanej wielkopłytowej. Zwrócono uwagę na słabe miejsca występujące w konstrukcji obiektów oraz w ich układzie funkcjonalnym. Omówiono techniczne możliwości przeprowadzenia remontu i przebudowy elementów zewnętrznych. Przedstawiono przykłady rozwiązań modernizacyjnych.
EN
The article deals with the modernization of external parts of buildings made in the prefabricated large-panel technology. Attention was paid to the weaknesses in the structure of the facilities and their functional arrangement. Technical possibilities of renovation and reconstruction of external elements were discussed. Examples of modernization solutions are presented.
12
PL
W artykule omówione zostały różnego rodzaju systemy i technologie służące do odprowadzenia wody z tarasów i balkonów. Autor omawia bardzo szczegółowo dostępne na rynku rozwiązania. Opisuje je i przedstawia wymogi techniczne, jakie należy spełnić przy ich zastosowaniu. Podaje szereg porad związanych z wykonawstwem tych systemów.
EN
The article discusses various types of systems and technologies for draining water from terraces and balconies. The author discusses the solutions available on the market in great detail. He describes them and presents the technical requirements to be met when using them. He provides a number of tips related to the implementation of those systems.
13
PL
W artykule omówione zostały różnego rodzaju systemy i technologie służące do odprowadzenia wody z tarasów i balkonów. Autor omawia bardzo szczegółowo dostępne na rynku rozwiązania. Opisuje je i przedstawia wymogi techniczne, jakie należy spełnić przy ich zastosowaniu. Podaje szereg porad związanych z wykonawstwem tych systemów.
EN
The article discusses various types of systems and technologies for draining water from terraces and balconies. The author discusses the solutions available on the market in great detail. He describes them and presents the technical requirements to be met when using them. He provides a number of tips related to the implementation of those systems.
14
Content available remote Detale tarasów i balkonów – wybrane zagadnienia
PL
W artykule autor omawia istotne detale związane z uszczelnianiem tarasów i balkonów, uwzględniając potencjalny wpływ czynników, które należy wziąć pod uwagę w prezentowanym zagadnieniu. Szczegółowo pokazuje problematyczne kwestie związane z uszczelnianiem, takie jak dylatacja brzegowa czy montaż okapu i progu drzwiowego oraz podaje pomocne przykłady w omawianej problematyce.
EN
In the article, the author discusses important details related to waterproofing of terraces and balconies, taking into account the potential influence of factors that should be taken into account in the presented issue. He shows in detail problematic issues related to sealing, such as edge dilatation or the installation of eaves and door thresholds, and provides relevant examples.
15
Content available Przeglądy i diagnostyka balkonów
PL
W pracy przedstawiono tematykę związaną z wykonywaniem przeglądów i diagnostyki balkonów o konstrukcji żelbetowej. W sposób zwięzły przypomniano wybrane warunki stawiane tego typu konstrukcjom. Następnie omówiono, co należy ocenić w czasie przeglądu. W sytuacjach wymagających przeprowadzania diagnostyki zostały omówione typowe badania oraz stosowana aparatura. Na podstawie doświadczeń własnych autorzy przedstawili przykłady typowych stanów technicznych od mających naturę estetyczno-użytkową aż po zagrażające bezpieczeństwu konstrukcji nośnej.
EN
The paper presents the subjects related to inspections and diagnostics of balconies with a reinforced concrete structure. Selected conditions for this type of construction are briefly mentioned. Then the paper discusses what should be assessed during the review. Typical tests and equipment used are discussed for situations requiring diagnostic procedures. Based on their own experience, the authors present examples of typical technical states, from those of an aesthetic and functional nature to those that threaten the safety of the load-bearing structure.
17
Content available remote Kompleksowy remont budynków wielkopłytowych
PL
Pierwsze budynki wielkopłytowe w Polsce powstały na przełomie lat 50. i 60. XX wieku i nic nie wskazywało na to, że będzie to technologia dominująca – z tendencją wzrostową – w następnych trzech dekadach. Z ostatniego raportu ITB wynika, że w kraju użytkuje się obecnie ok. 60 000 budynków wielokondygnacyjnych zamieszkałych przez 10 – 12 mln mieszkańców. Podobnie jak w innych zaawansowanych technologicznie krajach przygotowywane są wielokierunkowe plany rządowe dotyczące utrzymania i modernizacji wielkiej płyty. Autorzy artykułu, po wykonaniu wielu ekspertyz poznańskich budynków wielkopłytowych, przedstawiają swoje uwagi nawiązujące do tej problematyki.
EN
The first large-panel buildings in Poland were built at the turn of the 1950s and 1960s, and nothing indicated that it would be the dominant technology – with an upward trend - in the next three decades. According to the latest ITB report, there are currently around 60,000 multi-storey buildings inhabited by 10 – 12 million inhabitants in the country. As in other technologically advanced countries, multi-directional government plans are being prepared for the maintenance and modernization of the large panel. The authors of the article, after making many expert opinions of Poznań large-panel buildings, present their comments on this issue.
18
Content available remote Nowoczesne rozwiązania balkonów w realizowanych inwestycjach
PL
Przedmiotem artykułu są nowoczesne rozwiązania balkonów w realizowanych inwestycjach. Autor omawia takie zagadnienia jak projektowanie płyty balkonowej i jej prefabrykowane warianty, konstrukcja połączenia balkonu ze stropem, ograniczanie działania wody opadowej i wahań temperatury oraz zalety produkcji balkonu w zakładzie prefabrykacji.
EN
The subject of the article are modern solutions for balconies in ongoing investments. The author discusses such issues as designing a balcony slab and its prefabricated variants, construction of the connection between balcony and the ceiling, limiting the influence of rainwater and temperature fluctuations, as well as advantages of balcony production in a prefabrication plant.
PL
W artykule poruszono temat możliwości modernizacji budynków wykonanych w prefabrykowanej technologii wielkopłytowej, obejmującej remont albo całkowitą wymianę balkonów lub loggii. Zwrócono uwagę na problem braku lub niewłaściwego prowadzenia remontów elementów zewnętrznych w tego typu budynkach. Przedstawiono przykłady balkonów oraz loggii wykazujących oznaki zniszczenia, omówiono sposoby prowadzenia działań naprawczych i modernizacyjnych przy użyciu nowoczesnych rozwiązań konstrukcyjnych i materiałowych.
EN
The article discusses the possibility of modernization of buildings constructed in prefabricated large-panel technology, including renovation or complete replacement of balconies or loggias. Attention has been paid to the problem of lack or improper renovation of external elements in this type of buildings. The article presents examples of balconies and loggias showing signs of damage and discusses the ways of carrying out repair and modernization activities using modern construction and material solutions.
first rewind previous Strona / 5 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.