Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  balistyka przejściowa
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The article presents the results of tests on the temperature of propellant gases shortly after the bullet leaves the barrel. The temperature and movement of these gases were recorded with thermal cameras and a high-speed camera. Weapons with and without muzzle devices (flash suppressor, silencer) were used. The aim of the research was to check the capability to ignite flammable gases located in the vicinity of the propellant gases produced during firing. Comparison of the maximum temperature of the propellant gases and the ignition temperature of the flammable gases makes it possible to determine the probability of fire. The lowest temperature of propellant gases was in the case of shooting with 9 × 19 mm bullets with the lowest kinetic energy (518 J), and the highest temperature of these gases was during shooting with 5.56 × 45 mm HC (SS109) bullets with the highest kinetic energy (1,785 J).
PL
W artykule przestawiono wyniki badań temperatury wylotowych gazów prochowych w krótkim okresie po opuszczeniu pocisku z lufy. Temperaturę i ruch tych gazów rejestrowano kamerami termalnymi i kamerą szybką. Użyto broni z urządzeniami wylotowymi (tłumik płomienia, tłumik dźwięku) oraz bez nich. Celem badań było sprawdzenie zdolności zapalenia gazów łatwopalnych znajdujących się w otoczeniu wylotowych gazów prochowych powstających w czasie strzału. Porównanie maksymalnej temperatury gazów prochowych i temperatury zapłonu gazów łatwopalnych umożliwia określenie prawdopodobieństwa powstania pożaru. Najniższa temperatura wylotowych gazów prochowych była w przypadku strzelania pociskami 9 × 19 mm o najniższej energii kinetycznej (518 J), a najwyższa temperatura tych gazów była podczas strzelania pociskami 5,56 × 45 mm HC (SS109) o najwyższej energii kinetycznej (1 785 J).
PL
Praca stanowi kolejny etap badania balistyki przejściowej układów balistycznych. We wcześniejszych pracach przeprowadzone zostały badania balistyki przejściowej układów balistycznych, których lufy nie są wyposażone w urządzenia wylotowe. W pracy przedstawiono wyniki analizy numerycznej wpływu urządzenia wylotowego na balistykę przejściową armaty 35 mm. Przedstawione zostały wyniki numerycznego modelowania wystrzału 35 × 228 mm naboju z różnymi pociskami z lufy bez urządzenia wylotowego oraz wyposażonej w urządzenie wylotowe. Modelowanie przeprowadzono za pomocą programu ANSYS FLUENT. Wyznaczono zmiany prędkości pocisku, a także ciśnienia i prędkości gazów w lufie i poza lufą. Wyniki symulacji wskazują, że obecność urządzenia wylotowego nie wpływa na przyrost prędkości pocisku w okresie balistyki przejściowej w przypadku pocisku ćwiczebnego. Natomiast w przypadku pocisku podkalibrowego przyrost prędkości pocisku po wylocie z lufy jest mniejszy w przypadku, gdy na lufie zamontowane jest urządzenie wylotowe. Uzyskane wyniki badań zostaną wykorzystane do dalszych badań związanych z modernizacją 35 mm armaty morskiej.
EN
The paper continues the authors’ studies on the influence of intermediate ballistics phenomena on increase in the projectile velocity. In a consecutive stage of investigations, studies of the presence of the muzzle brake on acceleration of the projectile in the transitional period are carried out. In the paper, the results of numerical study of the influence of presence and shape of muzzle brake on the projectile velocity increase in the intermediate ballistics period are presented. Numerical simulations of firing of 35 × 228 mm cartridge, with various bullets from the barrel with and without muzzle brake have been performed using the ANSYS FLUENT code. Changes of projectile velocity and changes of pressure and gas velocity inside and outside the barrel were calculated. The simulations indicate that presence of the muzzle brake only in merely degree affects increase in the projectile velocity in the case of the practise missile, while in the case of FAPSDST projectile, the increment of projectile velocity after the output of the barrel is lower when the muzzle brake is mounted on the muzzle. The results will be used in further research related to the modernization of 35-mm naval cannon.
3
Content available Symulacja ruchu pocisku w pobliżu wylotu lufy
PL
W artykule przedstawione zostały wyniki symulacji ruchu pocisku w lufie oraz po wylocie z lufy. Obliczenia numeryczne przeprowadzono w programie ANSYS Fluent 12.1 dla lufy kalibru 30 mm oraz poruszającego się w niej pocisku amunicji średniokalibrowej 30 × 173 mm TP-T. Policzone zostały zmiany prędkości pocisku oraz ciśnienia i prędkości gazów w lufie i poza lufą. Wyniki symulacji wskazują, że przyrost prędkości w okresie balistyki przejściowej może być istotny.
EN
In the paper results of simulation of motion of a projectile and gases in the barrel and at the outlet of the barrel have been presented. Numerical calculations were performed in the ANSYS Fluent 12.1 for 30 mm caliber gun and TP-T projectile moving in it. Changes of projectile velocity and changes of pressure and gas velocity inside and outside of the barrel were calculated. The simulation has proven that the velocity increase during the intermediate ballistics period can be considerable.
PL
W artykule przedstawiono wyniki symulacji numerycznych wypływu powietrza wypychanego z lufy w wyniku ruchu pocisku podczas strzału na podstawie parametrów przepływu powietrza w lufie przed pociskiem. Stanowi to pierwszy etap symulacji przepływu w okresie balistyki przejściowej. Obliczenia numeryczne przeprowadzono w programie ANSYS Fluent 12.1 dla lufy kalibru 30 mm oraz poruszającego się w niej pocisku TP-T 30 x 173 mm naboju z prochem NC 1316. Porównano wyniki symulacji z publikowanymi w literaturze wynikami badań doświadczalnych i otrzymano jakościową zgodność wyników doświadczalnych z wynikami otrzymanymi na drodze symulacji.
EN
In the paper, the results of numerical simulations of air flow from the barrel of ejectable by the movement of the projectile during the shot on the parameters of air flow in the barrel before the bullet are presented. This represents the first phase flow simulation during the intermediate ballistics. Numerical calculations were performed in the ANSYS Fluent 12.1 to 30 mm caliber gun, and moving in the TP-T projectile 30 x 173 mm round with gunpowder NC 1316. Simulation results were compared with published findings in the literature and experienced qualitative agreement of results obtained with the experimental results obtained through simulation.
PL
W pracy omówiono dane literaturowe dotyczące zjawisk okresu balistyki przejściowej. Na ich podstawie zaproponowano model fizyczny opisu tych zjawisk i sformułowano w sposób matematyczny problem główny balistyki przejściowej. Wskazano na trudności, z jakimi wiąże się sformułowanie warunków granicznych dla tego problemu. Opisano sposób wyznaczania warunku granicznego na wylocie lufy. Przedstawiono przykładowe wyniki obliczeń przebiegu ciśnienia i prędkości przepływu gazodynamicznego na wylocie lufy.
EN
In the paper, experimental observations concerning phenomena of the intermediate ballistics are discussed. Basing on these observations, a physical model of the phenomena have been proposed and the main problem of the intermediate ballistics has been formulated. Some problems have been indicated, that are connected with the formulation of the problem. A method for determination of the boundary condition at the muzzle exit has been described. Some exemplary results of calculations of pressure and flow velocity at the muzzle exit have been presented.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.