W artykule przedstawiono podstawowe właściwości geopolimerów z dodatkiem miału ceramicznego, tj.: wytrzymałość na zginanie i ściskanie, nasiąkliwość wagową, gęstość objętościową. Wykonano analizę SEM kompozytów i badania chemiczne surowców. Przyjęto stałą zawartość dodatku odpadowego, zmienną temperaturę wygrzewania i zawartość aktywatora. Wyniki wskazują na korzystny wpływ dodatku miału ceramicznego na badane cechy kompozytów.
EN
The article presents the basic properties of geopolymers with the use of ceramic fines, i.e. flexural and compressive strength, water absorption, bulk density. SEM analysis of composites and chemical tests of research raw materials were performed. A constant content of waste additive, a variable curing temperature and activator content were assumed. The results show a beneficial effect of the addition of ceramic fines on the examined properties of the composites.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
W artykule przedstawiono opisane w instrukcji WTA nr 7-1-18/D zasady oceny istniejących konstrukcji murowych w kontekście prowadzenia prac renowacyjnych i konserwatorskich (w tym wykonania hydroizolacji wtórnych). Opisano sposób określenia i oceny stanu istniejącego (diagnostyki budynku), jak również określenia wymaganych działań oraz dokumentacji planowanych działań renowacyjnych.
EN
The article presents the principles of assessment of existing masonry structures in the context of renovation and conservation work (including secondary waterproofing) as described in WTA Instruction No. 7-1-18/D. The method of determining and assessing the existing condition (building diagnostics) as well as determining the required actions and documentation of planned renovation activities is described in the article.
Przedstawiono metody badań, nieniszczących i mało niszczących. Szczególną uwagę zwrócono na metodę badań opartą na wykorzystaniu próbek rdzeniowych pobieranych ze ścian i filarów murowych. Sformułowano wytyczne, które mogą być wykorzystane w praktyce.
EN
Non-destructive and minor-destructive test methods were presented. Particular attention was paid to the testing methods based on the use of core samples collected from the masonry walls and pillars. Recommendations that can be useful in practice were formulated.
Za pomocą wykresów CTPc opisano kinetykę przemian fazowych przechłodzonego austenitu w nowej stali bainityczno-martenzytycznej zawierającej 0,11% węgla. Badania wykonano metodą dylatometryczną dla dwóch wybranych temperatur austenityzowania. Określono temperatury Ms i Bs, hartowność stali oraz struktury uzyskane po ciągłym chłodzeniu z różnymi szybkościami z zakresu jednorodnego austenitu. Ponadto, wyznaczono temperatury krytyczne oraz oceniono zmiany struktury i twardości z temperaturą austenityzowania nowej stali. Uzyskane wyniki będą podstawą do zaprojektowania obróbki cieplnej, która pozwoli uzyskać żądane własności mechaniczne tej stali.
EN
The kinetic of the phase transformations of undercooled austenite of a new bainitic-martensitic steel containing 0.11% C was described by giving Continuous-Cooling-Transformation (CCT) diagrams. Investigations were carried out by means of dilatometric method for two austenitizing temperatures. Temparatures Ms, Bs and hardenability were calculated as well as microstructures were examined after continuous cooling with different rates from austenitizing temperature. In addition, the effect of austenitizing temperature of the steel on its critical temperatures, microstructural development and hardness were established. On the basis of obtained results it is possible to apply adequate heat treatment for desired mechanical properties of this steel.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.