Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 2

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  altimetry
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Several low-Earth orbit (LEO) satellites are equipped with dual-frequency altimeters, theoretically scanning the entire ionosphere in the nadir direction. These two frequencies enable the determination of ionospheric delay and, thus, total electron content (TEC) below the satellite orbit. This information helps in altimetric range determination but is limited to sea and ocean areas. Therefore, global and local ionospheric models are needed for ionospheric corrections over coastal regions and lands. At the same time, altimetry-derived TEC is an important source of validation data for global navigation satellite system (GNSS)-TEC models over the oceans, where the number of GNSS stations is limited. This study compares the application of a high-resolution regional GNSS-TEC model determined from Precise Point Positioning and modeled by least-squares collocation (PPPLSC), and global ionosphere maps (GIMs), in the determination of ionospheric corrections along coastal altimetry tracks. The ionospheric delay values from 5 models are then compared with altimetry-derived TEC from 3 satellites, in the region of southeastern Asia, during a time of moderate TEC values and solar conditions. The reason for the choice of area is that altimetric observations from coastal zones meet difficulties related to atmospheric corrections, e.g., ionospheric correction, which can be affected by the land in the altimeter footprint. For this reason, along with the rapid progress of inland satellite hydrology, we are encouraged to study the consistency of ionospheric delays in coastal regions. The study shows overall discrepancies of 30% of the entire ionospheric delay, which is 2-3 cm even in the case of 35 TEC unit (TECU = 1016 el/m2) values. For this reason, in the case of increased solar activity, the GIMs can have even less TEC consistency with the altimetry-derived TEC, resulting from different orbital altitudes, data gaps, and modeling techniques. The GIMs, modeled by low-order spherical harmonics, have particularly low resolution and do not represent well the equatorial ionization anomaly (EIA).
EN
Marine geoid modelling in the Atlantic coastal region of Argentina is problematic. Firstly, because of the insufficient amount of available shipborne gravity data, which renders a purely gravimetric solution not feasible. Second1y, because of the very strong ocean currents, that affect the quality of satellite altimetry data, so that a purely altimetric model is too noisy, even after low-pass filtering the Sea Surface Heights (SSHs) to remove (part of) the influence of the oceanographic signals. Thus, the recommended solution is to employ a combination method and the use of all the available gravity and altimetry data together. This is a suitable solution since (i) combination methods such as least squares collocation and Input Output System Theory (IOST) inherently low-pass filter and weigh the data, and (ii) will make use of the altimetric heights to fill the gaps of the shipborne gravity data. FolIowing this idea, purely altimetric, gravimetric and combined (using the IOST method) marine geoid models have been estimated for Argentina, employing all available shipborne gravity data, satellite altimetry SSHs and the latest Earth Gravity Models (EGMs) developed from CHAMP and GRACE missions. The new EGMs are especially usefuI to assess the quality of the new geoid models, especially against EGM96, which was used in an older ERSI-onIy solution for the same area. From the comparison of the estimated geoid models with respect to stacked TOPEX/Poseidon SSHs, the authors found that the altimetric model provides the best agreement while the combined one improves the accuracy [...] of the gravimetric solution.
PL
Z modelowaniem geoidy morskiej na obszarze Atlantyku w pobliżu wybrzeży Argentyny wiąże się wiele problemów. Po pierwsze, brak wystarczającej ilości morskich danych grawimetrycznych uniemożliwia modelowanie na tym obszarze czysto grawimetrycznej geoidy. Z drugiej strony, występowanie w tym rejonie bardzo silnych prądów oceanicznych zakłóca dane altimetryczne; czysto altimetryczny model geoidy jest obarczony zbyt dużym szumem, nawet po zastosowaniu wysokości poziomu morza (SSHs), przefiltrowanych przy użyciu nisko-pasmowego filtru, do usunięcia (częściowego) wpływu sygnałów oceanograficznych. Proponowane kombinowane rozwiązanie polega zatem na łącznym wykorzystaniu wszystkich dostępnych danych grawimetrycznych i altimetrycznych. Zastosowana w nim kombinacja metod takich jak metoda kollokacji i teoria wejścia-wyjścia systemów (IOST) umożliwia filtrowanie danych przy użyciu nisko-pasmowego filtru oraz ich odpowiednie wagowanie. W rozwiązaniu tym wykorzystywane są także dane altimetryczne do wypełnienia luk w morskich danych grawimetrycznych. Wszystkie dostępne morskie dane grawimetryczne, dane altimetryczne (SSHs) i najnowsze modele geopotencjału wyznaczone z wykorzystaniem danych z misji CHAMP i GRACE zostały użyte do wyznaczenia czysto altimetrycznego, grawimetrycznego i kombinowanego (z użyciem metody IOST) modeli geoidy morskiej dla Argentyny. Nowe modele geopotencjału, odgrywają istotną rolę w podniesieniu jakości modeli geoidy, w szczególności w odniesieniu do modelu EGM96, który był wykorzystany przy opracowaniu poprzedniego modelu geoidy morskiej na tym samym obszarze przy wykorzystaniu jedynie danych altimetrycznych z satelity ERS l. Z porównania opracowanych przez autorów modeli geoidy z SSHs otrzymanymi z misji TOPEX/Poseidon wynika, że modele altimetryczne charakteryzują się najlepszą zgodnością, zaś model kombinowany charakteryzuje się większą dokładnością aniżeli model czysto grawimetryczny.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.