Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 2022

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: abrasive treatment

Sortuj według:

Ogranicz wyniki do:

Ocena przyczepności włókien stalowych do matrycy betonowej po ich obróbce mechanicznej

Krystosik Dorota

Materiały Budowlane

2022

nr 11

1--5

W artykule podjęto próbę oceny przyczepności stalowych włókien do matrycy cementowej po ich obróbce mechanicznej, która polegała na rozwinięciu powierzchni pobocznicy przez obróbkę ścierną przy użyciu elektrokorundu. W pierwszym etapie badań dokonano oceny powierzchni włókien (przed i po obróbce ściernej) za pomocą technik metalografii. Wykonano, a następnie porównano obrazy powierzchni włókien w skali mikro, jak również określono chropowatość powierzchni włókien. Drugi etap badań dotyczył bezpośredniej oceny przyczepności włókien do matrycy betonowej metodą pull-out.

In the article was attempt to evaluate the adhesion of steel fibers to the concrete matrix after their mechanical treatment. The processing of the fibers consisted of developing on of their surface by an abrasive treatment with the use of electrocorundum. In the first stage of the research, the surface of the fibers was assessed (before and after abrasion treatment) using the selected metallographic techniques. A micro scale images of the fibers surface were made and compared, as well as the surface roughness of the fibers was determined. The second stage of the research concerned the direct evaluation of adhesion using the pull-out test.

Effect of Surface Abrasive Treatment on the Strength of Galvanised Steel Sheet Adhesive Joints

Miturska-Barańska Izabela, Rudawska Anna Rudawska

Advances in Science and Technology. Research Journal

2022

Vol. 16, no 1

75--84

The aim of this study was to determine the effect of abrasive treatment as a method of surface preparation on the strength of adhesive joints made of galvanised steel sheet. The subject of experimental investigations were adhesive joints of samples made of galvanised steel sheet DX51, 0.7 mm thick. The surfaces of the samples were abraded with coated abrasive tools of grain sizes P120, P180, P220, P400 and P600, and then degreased with PIKKO extraction solvent. The surface properties in terms of roughness and 3D surface topography were examined using a Hommel-Etamic T8000 RC120-400. The adhesive joints were made using Epidian 53 epoxy resin adhesive composition and IDA curing agent in a 100:40 weight ratio. Samples of single-lap adhesive joints were tested for strength on a Zwick/Roell Z150 testing machine, in accordance with the PN - EN 1465:2009 standard. The tests showed that the samples mechanically processed with an abrasive tool of P220 gradation show the best strength properties. Adhesive joints, in which the surface of the joined elements was mechanically processed with an abrasive tool of P120 gradation, obtained negative results. The obtained test results were subjected to further statistical analysis. The Shapiro-Wilk test was used to assess the normality of the distribution. Then, the non-parametric Kruskal-Wallis test and the median test were applied, which showed that there were no significant differences in the results obtained between the adhesive joints whose surfaces were prepared with P220 and P400 abrasive paper, i.e. both methods of surface preparation can be considered as the most favourable among those analysed during the adhesive bonding of DX51 galvanised sheets.