Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 6

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  SG
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The electrical network is a man-made complex network that makes it difficult to monitor and control the power system with traditional monitoring devices. Traditional devices have some limitations in real-time synchronization monitoring which leads to unwanted behavior and causes new challenges in the operation and control of the power systems. A Phasor measurement unit (PMU) is an advanced metering device that provides an accurate real-time and synchronized measurement of the voltage and current waveforms of the buses in which the PMU devices are directly connected in the grid station. The device is connected to the busbars of the power grid in the electrical distribution and transmission systems and provides time-synchronized measurement with the help of the Global Positioning System (GPS). However, the implementation and maintenance cost of the device is not bearable for the electrical utilities. Therefore, in recent work, many optimization approaches have been developed to overcome optimal placement of PMU problems to reduce the overall cost by providing complete electrical network observability with a minimal number of PMUs. This research paper reviews the importance of PMU for the modern electrical power system, the architecture of PMU, the differences between PMU, micro-PMU, SCADA, and smart grid (SG) relation with PMU, the sinusoidal waveform, and its phasor representation, and finally a list of PMU applications. The applications of PMU are widely involved in the operation of power systems ranging from power system control and monitor, distribution grid control, load shedding control and analyses, and state estimation which shows the importance of PMU for the modern world.
PL
Celem przeprowadzonych badań była ocena wykorzystania biotestu Phytotoxkit do określenia wpływu zmiennych dawek preparatu wapniowo-organicznego Biocal na próby gleb – próchniczną i mineralną. Dla weryfikacji przeprowadzono analizę oddziaływania nawozu na właściwości fizykochemiczne gleb. Stwierdzono wzrost zasobności obydwu gleby w związki wapnia, spadek kwasowości hydrolitycznej i wzrost pojemności sorpcyjnej. Badanie wskaźnika inhibicji kiełkowania SG wykazało, że tylko małe dawki nawozu (do 0,5 g) wpłynęły korzystnie na rośliny testowe. W porównaniu z glebami nienawożonymi dawka Biocalu do 0,5 g dla gleby próchnicznej i 0,25 g dla mineralnej była korzystna w stosunku do stymulacji wzrostu korzeni roślin, gdyż wskaźnik RI osiągał wartości ujemne.
EN
The aim of the present study was to evaluate the use of Phytotoxkit biotest to determine the effect of humic and mineral soils fertilization with variable doses of calcium-organic Biocal preparation. To verify the effect of fertilizer the analysis of Biocal impact on physicochemical properties was executed. An increase of calcium content, decrease of hydrolytic acidity and increase of sorption capacity in both soil samples was ascertained. The research of seed germination index SG showed that only small doses of fertilizer (up to 0,5 g) had a positive effect on the test plants. In comparison to non-fertilized soils the 0,5 g dose of Biocal in humic soil and 0,25 g in mineral soil was beneficial with respect to root growth stimulation, as RI index reached negative values.
3
Content available remote Renewable Energy Sources Intrusion into Smart Grids - Selected Problems
EN
The aim of the paper are selected problems resulting from Renewable Energy Sources (RES) intrusion into Smart Grids (SG) presentation. Upon considerations there are: wind turbines influence on power system operation, RES and microgrids operation with a Power System, new Energy Market for islanded and connected to power system microgrid, Energy Management System and ICT after intrusion RES. Conclusion presents perspective of RES development.
PL
Celem artykułu jest przedstawienie wybranych problemów spowodowanych dołączeniem odnawialnych źródeł energii (OZE) do sieci inteligentnej. Rozważono: wpływ turbin wiatrowych ma eksploatację systemu elektroenergetycznego, Współpracę OZE I mikrosieci z tym systemem, nowy rynek energii dla pracy wyspowej i mikrosieci współpracującej z systemem, Energy Management System i ICT po dołączeniu OZE. W zakończeniu przedstawiono perspektywy rozwoju OZE.
PL
Od kilku lat można zaobserwować zainteresowanie spółek dystrybucyjnych smart meteringiem (SM) - czyli inteligentnymi systemami pomiarowymi oraz zaawansowanymi technologicznie elektronicznymi licznikami. Masowe zainstalowanie takich urządzeń i systemów stwarza nowe możliwości dla sprzedawcy, spółki dystrybucyjnej oraz odbiorcy.
EN
The paper presents results of trade-off studies on the effectiveness of internal cylindrical grinding by the use of grinding wheels made of microcrystalline aluminiumoxid type SC and conventional abrasive material type 99A.
PL
W pracy podano wyniki badań porównawczych efektywności szlifowania wewnętrznych powierzchni walcowych ściernicami z mikrokrystalicznego korundu spiekanego typu SC oraz ścierniwa konwencjonalnego 99A.
EN
Summary The paper presents the results of investigations on the dynamic strength of vitreous bond grinding wheels made of microcrystalline alumina type sol-gel subject to a bursting test. A developed statistical model, giving consideration to the effect of abrasive-grain size, structure, hardness and concentration of microcrystalline sintered alumina SC in the binder material of these tools, has been discussed.
PL
W pracy przedstawiono wyniki badań wytrzymałości dynamicznej ściernic ceramicznych z mikrokrystalicznego korundu spiekanego typu SC, poddawanych próbie rozrywania. Do opracowania wyników wykorzystano model statystyczny, uwzględniający wpływ rozmiarów ziarna ściernego, struktury, twardości oraz zawartości korundu SC w ścierniwie tych narzędzi na ich prędkość graniczną. Na podstawie analizy wyników badania stwierdzono, że wytrzymałość dynamiczna na rozrywanie ściernic z mikrokrystalicznego korundu spiekanego SC zależy w sposób statystycznie istotny od wszystkich uwzględnionych parametrów budowy narzędzi. Największą jednak i jednoznaczną tendencję oddziaływania obserwowano tylko dla rozmiarów ziarna ściernego. Im mniejszy rozmiar ziarna ściernego, tym większą wytrzymałością dynamiczną charakteryzuje się ściernica.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.