Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 8

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  SERS
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Nowadays, surface-enhanced Raman spectroscopy (SERS) is being considered as a rapid and powerful vibrational spectroscopy technique for chemical analysis of materials. The Very high incensement in the intensities of the Raman signal allows for application of that method for chemical analysis of nanostructured surfaces covered with suitable enhancing substrates. For SERS measurements, the substrate plays an essential role because it provides a localized metal surface plasmon resonance enhancement of analyte molecules. Moreover, the use of SERS has a great potential to overcome the Raman spectroscopy weaknesses connected with intensity problems and, therefore, can be applied to the field of heterogeneous catalysts. This article reviews the application of nanoparticles substrates as a ground for SERS enhancement. The article also focuses on the recent progress in SERS characterization of catalytic materials. Recent developments in the field of catalytic material characterization for selected tested molecules allow for performing valuable and reproducible SERS experiments on working catalysts in the reaction environment.
2
Content available Preparatyka materiałów SERS-aktywnych
PL
W artykule opisano opracowane metody preparatyki różnego typu materiałów zawierających nanocząstki srebra na potrzeby Wzmocnionej Powierzchniowo Spektroskopii Ramana (SERS). W pracy przedstawiono preparatykę koloidów srebra stabilizowanych za pomocą PVP (poliwinylopirolidon) oraz preparatykę koloidu srebra umieszczonego w materiale polimerowym.
PL
W artykule zaprezentowano metody otrzymywania nanomateriałów wykorzystywanych we wzmocnionej powierzchniowo spektroskopii Ramana (SERS). Scharakteryzowano powierzchnie zsyntetyzowanych materiałów oraz ich efektywność we wzmacnianiu sygnału Ramana substancji referencyjnej, rodaminy 6G. Przedstawiono dotychczasowe dane bibliograficzne dotyczące zastosowania wzmocnionej spektroskopii Ramana do detekcji związków będących markerami chorób nowotworowych oraz substancji, które potencjalnie mogą służyć jako markery w stanach chorobowych.
EN
Gold nanoparticles are emerging as promising agents for various areas of material science as well as nanotechnology, electronics and medicine. The interest in this material is provided due to its unique optical, electronic and molecular-recognition properties. This paper presents results of preparation, characterization and biofunctionalization of gold nanoparticles. Nanoparticles have been conjugated with the cholesterol oxidase enzyme in order to prepare the active element for biosensors. Cholesterol oxidase is one of the most important analytical enzyme, used for cholesterol assay in clinical diagnostics, and there is still a necessity in improvement of existing analytical techniques, including bio-nanotechnological approaches based on modern nanosystems. The prepared bio-nanosystem was characterized by the enzyme activity test. Obtained results showed a stable binding of the enzyme with nanoparticles and preserved the bioactivity approves which gives possibility to use the prepared bio-nanosystems for analytical purposes. The Surface Plazmon Resonance and the Surface Enhanced Raman Scattering as specific for nanocurriers effects were observed what enable us to research the oscillation spectra of enzyme. These spectra were compared with ones obtained by IR-spectroscopy. The vibrational lines are attributed to chemical functional groups existing in enzyme, for example, amino acids, amide groups as well as flavin – adenine dinucleotide cholesterol oxidase prosthetic group. By this way the identified spectral lines can be used as a distinguishing mark of enzyme.
PL
Nanocząstki złota zdają się być niezwykle obiecującym materiałem, który z powodzeniem może być wykorzystywany w różnych dziedzin inżynierii materiałowej, nanotechnologii, elektroniki czy medycyny. Zainteresowanie tym materiałem wynika z posiadanych przez niego unikatowych właściwości optycznych, elektronicznych i identyfikacji na poziomie molekularnym. W artykule przedstawiono wyniki prowadzonych badań dotyczących przygotowania, charakterystyki i biofunkcjonalizacji nanocząstek złota. Celem wytwarzania i łączenia nanocząstek złota z enzymem oksydazą cholesterolową było opracowanie aktywnego biologicznie elementu biosensora. Oksydaza cholesterolowa jest jednym z najważniejszych enzymów analitycznych, stosowanych w diagnostyce klinicznej do oznaczenia stężenia cholesterolu. Istnieje potrzeba doskonalenia istniejących metod analitycznych, między innymi poprzez wykorzystanie nowoczesnych nanomateriałów. Przeprowadzono badania aktywności enzymu immobilizowanego, jak również dokonano charakterystyki danego bionanosystemu za pomocą wybranych metod optycznych. Na podstawie uzyskanych wyników można stwierdzić, że wiązanie enzymu z nanocząstkami jest stabilne, a aktywność biologiczna została zachowana, co pozwala na przygotowanie bio-nanosystemu do celów analitycznych. Zaobserwowano również wystąpienie dwóch efektów optycznych charakterystycznych w przypadku zastosowania odpowiednich nanonośników: Powierzchniowego Rezonansu Plazmonów oraz Powierzchniowo Wzmocnionego Rozproszenia Ramanowskiego. Uzyskane widma były porównywane z widmami w podczerwieni. Zaobserwowane linie przypisano do charakterystycznych grup funkcyjnych, aminokwasów, wiązań peptydowych, jak również dinukleotydu flawinoadeninowego czyli grupy prostetycznej oksydazy cholesterolowej. Zidentyfikowane linie mogą być wykorzystywane jako marker analityczny dla danego enzymu.
EN
The first surface-enhanced Raman scattering (SERS) spectra were reported in 1974. A few years after discovery SERS became a well established surface analytical technique, which is widely used to study electrochemical and catalytic processes under in situ conditions. Recently one can observe a large increase in the interest in SERS. It is due to two very important developments in the field of SERS spectroscopy, which have been made in the last decade. The first very important achievement is the observation of SERS spectra of single molecules. The second development, having an enormous potential for surface Raman spectroscopy, is the tip-enhanced Raman scattering (TERS): an AFM or STM tip made of the SERS active metal is used to increase the Raman scattering from molecules adsorbed at a surface located underneath the tip. In this approach, a very significant increase in the spatial resolution of SERS measurements is possible. This review is an attempt to provide an overview of the state of the art and further possibilities of these two recently developed SERS techniques.
6
EN
Spherical silica powders with uniform, submicron grain diameter have been obtained using the sol -gel technology. Subsequently, metallic silver nanoparticles have been produced on the surfaces of the grains. Raman scattering spectra of such SiO2-Ag0 powders impregnated in ethanol solutions of tris(2,2' -bipyridyl)ruthenium(II) can be recorded for solutions four orders of magnitude more diluted than the lowest possible concentration detectable for complex liquid solutions in the same experimental conditions (the SERS effect). Also, such silver-doped silica powders display anti-microbial capabilities and can be used to obtain doped thin-film coatings, e.g. for the production of bacteriostatic textiles.
EN
The adsorption of 4-phenylpyridine (4-PhPy) on silver was examined using conventional electrochemical techniques: cyclic voltammetry, impedance measurements and surface enhanced Raman spectroscopy (SERS) in a wide range of electrode potentials. Electrochemical results indicate a weaker adsorption of 4-PhPy molecules on Ag than on Au electrode, but considerably stronger than adsorption of pyridine. For saturated solutions the Raman results point out the reorientation of the 4-PhPy molecules from more flat configuration at potentials more positive than -0.7 V vs SCE, to more perpendicular one at more negative potentials. This reorientation may be connected with the formation of stable surface complexes at potentials more positive than -0.7 V and of molecular stacks at more negative electrode potentials.
EN
The application of in situ surface enhanced Raman scattering (SERS) spectroscopy to aspects of mineral processing is discussed. In the study of flotation systems, SERS has been used to characterise the species formed on coinage metal surfaces over a range of controlled potentials for ethyl, i-propyl, i-butyl and i-amyl xanthates, for O-isopropyl-N-ethylthionocarbamate (IPETC), for 2-mercaptobenzothiazole (MBT), and for diisobutyl dithiophosphinate (DIBDTPI). For each collector, adsorption occurs via charge transfer to form a metal-sulfur bond and, in situations in which the reversible potential for the formation of the bulk phase is known, at underpotentials. The dissolution of silver in basic solutions containing cyanide has been shown to be inhibited by MBT and by DIBDTPI as a result of the chemisorption of the collector species. In hydrometallurgy, SERS has been applied to the investigation of gold leaching. Changes in the surface species that occur during gold cyanidisation as the potential is varied have been identified from SERS spectra recorded in real time on voltammograms. In electrometallurgy, SERS investigations of copper electrodeposition from sulfuric acid solutions have shown that a transient surface sulfate species is involved in the plating process.
PL
W pracy przedyskutowano zastosowania spektroskopii rozproszenia ramanowskiego (ze wzmocnieniem sygnału wskutek odbicia promieniowania od powierzchni - SERS) w badaniach związanych z procesami przeróbki minerałów w których widmo wykonywane jest in situ. W układach flotacyjnych zastosowano SERS do charakterystyki pokryć na metalach z grupy miedzi, powstających w wyniku oddziaływania na te metale w warunkach kontrolowanego potencjału roztworów ksantogenianów: etylowego, izopropylowego, izobutylowego i izoamylowego, a także o-izopropylo-Netylotionocarbaminianu, 2-merkaptobenzotiazolu oraz dwuizobutylo dwutiofosfonianu. W przypadku wszystkich kolektorów adsorpcja następuje w wyniku przeniesienia ładunku z wytworzeniem wiązania metal-siarka, a jeśli znany jest odwracalny potencjał tworzenia fazy objętościowej to można stwierdzić, że wiązanie z powierzchnią następuje przy potencjale niższym niż dla reakcji w fazie objętościowej. Zaobserwowano, że roztwarzanie srebra w zasadowych roztworach cyjankowych jest silnie spowalniane w wyniku chemisorbcji 2-merkaptobenzotiazolu i dwuizobutylo dwutiofosfonianu. W zakresie hydrometalurgii zastosowano SERS do badania ługowania złota. Stosując rejestrację widm SERS w trakcie wykonywania woltamperogramów przy zmieniającym się potencjale obserwowano zmiany w składzie warstw powierzchniowych na złocie w wyniku traktowania powierzchni złota cyjankami przy różnych potencjałach. SERS zastosowano również do badania procesów elektrometalurgicznych, stwierdzając że w procesach osadzania miedzi z kwaśnych roztworów siarczanowych bierze udział przejściowy produkt zawierający grupę siarczanową.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.