Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Powiadomienia systemowe

Sesja wygasła!

Znaleziono wyników: 3

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: NaOH concentration

Sortuj według:

Ogranicz wyniki do:

Effect of NaOH Molar Concentration on Microstructure and Compressive Strength of Dolomite/Fly Ash-Based Geopolymers

Azimi Emy Aizat, Mohd Salleh M. A. A., Al Bakri Abdullah Mohd Mustafa, Aziz Ikmal Hakem A., Hussin Kamarudin, Chaiprapa Jitrin, Vizureanu Petrica, Yoriya Sorachon, Nabiałek Marcin, Wyslocki Jerzy J.

Archives of Metallurgy and Materials

2022

Vol. 67, iss. 3

993--998

Dolomite can be used as a source of aluminosilicate to produce geopolymers; however, this approach is limited by its low reactivity. This study analyzes the viability of producing geopolymers using dolomite/fly-ash with sodium silicate and NaOH solutions (at multiple concentrations) by determining the resultant geopolymers’ compressive strengths. The dolomite/fly-ash-based geopolymers at a NaOH concentration of ~22 M resulted in an optimum compressive strength of 46.38 MPa after being cured for 28 days, and the SEM and FTIR analyses confirmed the denser surface of the geopolymer matrix. The synchrotron micro-XRF analyses confirmed that the Ca concentration exceeded that of Si and Mg, leading to the formation of calcium silicate hydrate, which strengthens the resulting geopolymers.

Synthesis of single-crystalline Pb(Zr0.52Ti0.48)O3 nanocrystals by hydrothermal method

Deng Chunyu, Qin Chaoran, Li Xinyi, Li Shaoqing, Huang Zhixiong, Zhang Lianmeng, Zhou Xuedong, Guo Dongyun, Ju Yang

Materials Science Poland

2019

Vol. 37, No. 3

473--481

PbZr0.52Ti0.48O3 nanocrystals were synthesized by a hydrothermal method. The effect of NaOH concentration, reaction temperature and time on nucleation and growth of PbZr0.52Ti0.48O3 nanocrystals was investigated. As the 0.05 mol/L PbZr0.52Ti0.48O3 precursors were heated at 200 °C for 21 h with NaOH concentration of 0.5 mol/L, the tetragonal PbZr0.52Ti0.48O3 nanocrystals were formed, and the grain size was more than 20 nm. With increasing the NaOH concentration from 0.5 to 1.5 mol/L, the grain size of PbZr0.52Ti0.48O3 nanocrystals decreased. When the precursors were heated at different temperatures (140 °C to 200 °C) for 21 h with 1.0 mol/L NaOH, single-phase PbZr0.52Ti0.48O3 nanocrystals were obtained at 160 °C to 200 °C. With increasing the reaction temperature from 160 °C to 200 °C, the grains size of PbZr0.52Ti0.48O3 nanocrystals increased from 5 nm to 9 nm. When the precursors were heated at 160 °C in different reaction times from 6 h to 21 h, the evolution from amorphous to crystalline PbZr0.52Ti0.48O3 nanocrystals in correlation with the reaction time was observed. Single crystalline PbZr0.52Ti0.48O3 nanocrystals with narrow size distribution (from 5 nm to 9 nm) were synthesized by controlling the NaOH concentration, reaction temperature and time. The obtained results can find potential application in preparing PbZr0.52Ti0.48O3 thin films on flexible substrates.

Effect of NaOH concentration on optical properties of zinc oxide nanoparticles

Koutu V., Shastri L., Malik M. M.

Materials Science Poland

2016

Vol. 34, No. 4

819--827

In the present work, powder zinc oxide samples were prepared by varying NaOH concentration (0.1 M – 0.4 M) using wet-chemical co-precipitation method. As-synthesized ZnO was characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), photoluminescence (PL) and Raman spectroscopy. Formation of hexagonal wurtzite structure of the ZnO samples has been revealed from XRD studies. This study further suggests reduction in crystallite size from 40 nm to 23 nm with an increase in NaOH concentration which is confirmed by FESEM. PL and Raman spectroscopy studies of these samples show significant peak shift towards the higher and lower energy respectively, with maximum PL emission between 400 nm and 470 nm region of the visible spectrum. Noticeable inverse relationship between optical properties of ZnO nanoparticles and NaOH concentration may be attributed to the rapid nucleation during the synthesis process. With these remarkable properties, ZnO nanoparticles may find applications in nanoelectronic devices, sensors, nanomedicine, GATE dielectrics, photovoltaic devices, etc.