Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Metallurgy and Materials

2 2019

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: Hastelloy

Sortuj według:

Ogranicz wyniki do:

Effect of Powder Shape and Sintering Temperature on the Preparation of Ni-Based Porous Metal

Yi Yu-Jeong, Lee Min-Jeong, Kim Hyeon-Ju, Yang Sangsun, Park Man-Ho, Kim Byoung-Kee, Yun Jung-Yeul

Archives of Metallurgy and Materials

2019

Vol. 64, iss. 3

917--920

Usually porous metals are known as relatively excellent characteristic such as large surface area, light, lower heat capacity, high toughness and permeability for exhaust gas filter, hydrogen reformer catalyst support. The Ni alloys have high corrosion resistance, heat resistance and chemical stability for high temperature applications. In this study, the Ni-based porous metals have been developed with Hastelloy powder by gas atomization and water atomization in order to find the effects of powder shape on porous metal. Each Hastelloy powder is pressed on disk shape of 2 mm thickness with 12 tons using uniaxial press machine. The specimens are sintered at various temperatures in high vacuum condition. The pore properties were evaluated using Porometer and microstructures were observed with SEM.

A Study on Pore Properties of Hastelloy Powder Porous Metal Fabricated by Electrostatic Powder Coating

Lee Min-Jeong, Yi Yu-Jeong, Kim Hyeon-Ju, Park Man-Ho, Kim Byoung-Kee, Yun Jung-Yeul

Archives of Metallurgy and Materials

2019

Vol. 64, iss. 2

547--550

Porous metals show not only extremely low density, but also excellent physical, mechanical and acoustic properties. In this study, Hastelloy powders prepared by gas atomization are used to manufacture 3D geometries of Hastelloy porous metal with above 90% porosity using electrostatic powder coating process. In order to control pore size and porosity, foam is sintered at 1200~1300°C and different powder coating amount. The pore properties are evaluated using SEM and Archimedes method. As powder coating amount and sintering temperature increased, porosity is decreased from 96.4 to 94.4%. And foam density is increased from 0.323 to 0.497 g/cm3 and pore size is decreased from 98 to 560 μm. When the sintering temperature is increased, foam thickness and strut thickness are decreased from 9.85 to 8.13 mm and from 366 to 292 μm.