Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: DME+LPG

Sortuj według:

Ogranicz wyniki do:

An influence of correction of the ignition advance angle on the combustion process in SI engine fuelled by lpg with the addition of DME

Kubica Grzegorz, Marzec Paweł

Journal of KONES

2019

Vol. 26, No. 4

285--292

The paper presents the results of tests of the SI engine fuelled by LPG with the addition of DME in the form of a mixture of gaseous fuels. Experimental tests were carried out on a chassis dynamometer in the full range of engine loads, at a fixed rotational speed: 2000, 2500 and 3000 rpm. The use of dimethyl ether (DME) as a fuel component makes it possible to exploit its important advantages. DME can be produced as a renewable fuel, which is important from the point of view of ecology. Another important fact is the presence of oxygen in this fuel, which has a positive effect on the engine volumetric efficiency. During the tests, the ignition timing was also adjusted due to the very good DME flammability. Two additional correction levels were applied, increasing the ignition advance by 3 and 6 CA degrees, compared to the factory settings of the driver. The analysis of the obtained results allowed determining the dependence of the basic engine parameters, in the function of the correction of ignition advance angle. In the summary, attention was also paid to the possibility of determining corrected maps of the ignition advance angle taking into account the variable proportions of fuel components.

The possibilities of using DME (BioDME), as an additive to conventional gaseous fuels in SI engine

Flekiewicz M., Kubica G., Marzec P.

Combustion Engines

2017

R. 56, nr 4

150--155

The results of SI engine fueled with blends of LPG and DME are presented in the paper. The range studies submitted includes measurements at varying engine loads, at selected values of speed. The research was conducted on a chassis dynamometer, specifying the engine load by the degree of throttle opening. Value of the mass fraction of DME in the blend with LPG was determined based on previous analyzes. The selected fuel blends containing from 7 to 17% DME (mass fraction). During the study was also performed a series of comparative measurements with pure LPG. Analyses show that of DME can be used as a partial substitute for LPG in SI engines. Its presence does not a negative impact on performance and emissions of the engine. The obtained results indicate that the amount of addition of DME should be varied depending on the engine load. Moreover, the use of this fuel does not require changes to the design fueling system and storage of LPG.