Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Metallurgy and Materials

2 2019

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

High Cycle Fatigue Performance of Hollow-Extruded 6005A-T6 Aluminum Alloy Characterized by a Layered Microstructure

Ma Zhongwei, Ma Lin, Xu Bo, Dan Chuchen, He Zhaokun, Wang Yue

Archives of Metallurgy and Materials

2019

Vol. 64, iss. 1

285--292

Sound joint of hollow-extruded 6005A-T6 aluminum alloy was achieved by friction stir welding and its high cycle fatigue performance was mainly investigated. As a result, the joint fatigue limit reaches 128.1 MPa which is 55% of the joint tensile strength. The fatigue fracture mainly occurs at the boundary between the stir zone and thermo-mechanically affected zone due to the large difference in the grain size. This difference is caused by the layered microstructure of the base material. The shell pattern with parallel arcs is the typical morphology in the fracture surface and the distance between arcs is increased with the increase of stress level. The specimen with the fracture located in the stir zone possesses a relatively low fatigue life.

Fatigue Behavior of MIG-Welded 7N01-T4 Aluminum Alloy with Different V-Groove Angles

Ma Zhongwei, Li Qinghua, Ma Lin, He Zhaokun, Liang Zhimin

Archives of Metallurgy and Materials

2019

Vol. 64, iss. 4

1577--1584

7N01-T4 aluminum alloy was welded by metal inert gas welding and the influence of V-groove angle on joint fatigue properties was investigated. The results indicate that the volume of fusion zone (FZ) and the grains in FZ become small when the groove angle decreases to 50° from 70°. Most pores distribute at the FZ edge and fewer pores are formed in the small angle joint. The fatigue crack mainly initiates at the transition region between the weld passes due to the pore concentration. The small angle contributes to increasing joint fatigue properties, especially at the low stress level. The fatigue strength of 50° joint is 103.06 MPa which is 15.3% higher than that of 70° joint.