Al-4.5Cu alloys are widely used in aerospace industries due to their low weight and high mechanical properties. This group of aluminium alloys is known as 2xx series and exhibits the highest mechanical properties however this alloy is known to suffer from feedability and high tendency for hot tearing. Al-Si alloys (3xx) have improved fluidity and better feedability particularly by several modifications such as Ti, B or Sr. Eutectic temperature is decreased and mechanical properties can be enhanced. Yet, the strength values of this alloy group cannot reach the values of 2xx series. Therefore, in this study, the effect of Ag addition on the fluidity of Al-4.5Cu alloy has been investigated. Standard size spiral mould was used. The casting temperature was selected to be 770oC. Five castings were made and Weibull statistical approach was used to evaluate the results. In addition, coating of the die with BN was also investigated. It was found that Ag addition and BN coating of the die revealed the most reproducible, reliable and high fluidity values.
The mechanical properties of flax and jute woven fabrics were investigated and compared with each other. Mechanical properties of the yarns and fabrics were characterised and compared for each scale. The fabric structure, yarn physical properties, fibre cross-section, and fibre molecular structure parameters of the fabric were investigated. FTIR and TGA thermogram analyses were applied to the fabrics to characterize them. The fabric tensile strength was attributed to the composite tensile strength, but there was not a direct relation. The tensile strength of natural fibre fabrics was determined as significantly reduced depending on the temperature increase. This condition should be considered as an important limitation for composite applications.
PL
Badano i porównywano mechaniczne właściwości tkanin z lnu i juty. Badano właściwości zarówno przędz jak i wykonanych z nich tkanin. Brano pod uwagę strukturę tkanin, fizyczne właściwości przędz, przekroje włókien i molekularną strukturę włókien. Stosowano metodę FTIR i analizy TGA. Porównywano wytrzymałość na rozciąganie tkanin i wykonanych z nich kompozytów, nie stwierdzając bezpośrednich zależności. Stwierdzono znaczny spadek wytrzymałości przy wzroście temperatury. Powinno to być brane pod uwagę jako istotny warunek ograniczający zastosowanie kompozytów z włókien naturalnych przy pracy w podwyższonych temperaturach.
The most popular method to produce composites for ballistic applications is to use aramid and ultra high molecular weight polyethylene (UHMWPE) fibers as reinforcement materials in different matrices. The composite materials used in this type of application, especially those used as armoring materials for explosions, are subjected to a very high level of energy. In this study, the effect of the reinforcement material type and cross-plied condition of reinforcement were examined using high-level impact tests. The impact tests were performed at low speed but high energy, and thus the behaviour of the composite materials that were exposed to high-level impact energy could be examined. According to the results, the UD aramid composite produced the best results with respect to high-level impact tests. In addition, mass optimisation could be achieved without the loss of the high-level impact energy by preparing a hybrid composite with UD UHMWPE and UD aramid fibers.
PL
Powszechną metodą produkcji kompozytów dla zastosowań balistycznych jest użycie jako wzmocnienia włókien aramidowych oraz włókien polietylenowych o super wysokim ciężarze cząsteczkowym i różnych materiałach matrycy. Materiały kompozytowe stosowane w tego typu rozwiązaniach, specjalnie te stosowane jako materiał wzmacniający w przypadku eksplozji są poddawane testom o bardzo wysokim poziomie energii. W przedstawionej pracy badano efekty zastosowania różnego typu materiałów wzmacniających i ich konfiguracji w strukturze. Badania prowadzono stosując testy udarowe o bardzo wysokiej energii lecz małej prędkości udaru. Dzięki temu można było sprawdzić zachowanie różnych zastosowanych materiałów. W efekcie stwierdzono, że najlepsze wyniki uzyskuje się używając włókna aramidowe. Dodatkowo można było przeprowadzić optymalizacje masy poprzez przygotowanie kompozytów hybrydowych.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.