Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 50

Liczba wyników na stronie
first rewind previous Strona / 3 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 3 next fast forward last
PL
Promieniowanie słoneczne oprócz swoich pozytywnych efektów jest ważną przyczyną licznych zagrożeń. Może wpłynąć negatywnie na nasze zdrowie, jak również na materiały konstrukcyjne i użytkowe. Zatem ekspozycja na słońce powinna być umiarkowana i w pełni kontrolowany. Wpływ promieniowania słonecznego i czynników atmosferycznych na materiały polimerowe jest szeroko badany na świecie. Poznanie i zrozumienie wpływu, jaki wywiera na materiały pozwala je zaprojektować jako trwałe i funkcjonalne przez długi czas użytkowania. Przedstawiono badania nad wpływem sztucznego promieniowania słonecznego na stabilność termiczną materiałów polimerowych. Wybrane do badań najczęściej i najszerzej stosowane polimery: poliamidy i polipropylen. Polimerów powszechnie prawie nie stosuje się w postaci czystej, w zastosowaniach są często wypełnione dodatkami. Modyfikuje się je przez wprowadzenie dodatków w skali mikrometrycznej. Dodatki w postaci perełek szklanych, talku, węglanu wapnia, sadzy lub nanomateriałów jak nanorurek węglowych lub glinokrzemianów poprawiają zdolność procesu i modyfikują większość właściwości materiałów polimerowych. W niniejszej pracy użyto polimerów z różnymi dodatkami. Działanie dodatków w znacznym stopniu wpływa na trwałość polimerów, hamuje ich degradację.
EN
Solar radiation in addition to its positive effects, is an important cause of numerous threats. It may influence negatively our health as well as construction and utility materials. Thus, exposure to sun should be moderate and fully controlled. The influence of solar radiation and atmospheric factors on polymeric materials is a widely studied subject around the world. To know and understand the influence that the environment exerts on materials, allows to design durable and functional for a long time of use. The paper presents research on the influence of artificial solar radiation on the thermal stability of polymeric materials. Selected for the study three most common and most widely used polymers: polyamides and polypropylene. Polymers commonly called plastics, are hardly used in their pure form in applications, they are often filled with additives. The modification of polymers, through the incorporation of additives in the micrometer range like: glass beads, talc, calcium carbonate, carbon black or in nanometer range like carbon nanotubes or aluminosilicates, improve their process ability and modify most of the polymer material properties. In this paper polymers with various additives were used. The effects of additives largely affects the stability of polymer materials as well as to prevent harmful influence of solar radiation and their degradation.
PL
W przedstawionym artykule badano wpływ temperatury i promieniowania UV na strukturę poliamidu 6 oraz jego nanokompozytów z wielościennymi nanorurkami węglowymi. Kompozyty PA6 z MWNT otrzymano przez mieszanie w stopie nanorurek węglowych osadzonych na nośniku polimerowym w postaci masterbacza z bazowym PA6 a następnie badano ich krystalizacje i proces topnienia. Wyniki różnicowej kalorymetrii skaningowej (DSC), pokazują dwa piki egzotermiczne krystalizacji w przypadku nanokompozytów PA6/MWNT podczas gdy, dla matrycy PA6 obserwuje się pojedynczy, egzotermiczny pik. Próbki zawierające wielościenne nanorurki węglowe charakteryzowały się ponadto wyższym stopniem krystaliczności i brakiem widocznego na krzywych DSC przegięcia egzotermy topnienia, wskazującej na obecność mniej stabilnej termicznie fazy γ, wyraźnej na krzywych PA6.
EN
In the paper, the effect of UV radiation and temperature on the structure of nylon 6 and it's nanocomposites with multi-walled carbon nanotubes was shown. PA6 composites prepared by a simple melt-compounding of multi-walled carbon nanotubes in a polymer supported as the master batch with the base of PA6 and then their crystallization and melting behavior were studied. Differential scanning calorimetry (DSC), indicate the presence of two exothermic crystallization peaks in the case of PA6/MWNT nanocomposites while, in the case of the PA6 matrix, a single exothermic peak was observed. Samples containing multi-walled carbon nanotubes were also characterized by a higher degree of crystallinity and the lack of visible DSC curves inflection of the exotherm point, indicating the presence of the less thermally stable γ phase, which was clearly visible on PA6 curves.
3
Content available remote Modeling of the lamellar structure of ethylene-1-octene copolymers
EN
The parameters of the lamellar structure of melt crystallized ethylene-1-octene copolymers were determined with the usage of model calculations. Two models were employed: classical model of Hosemann and a variable local structure model. In the second model it was assumed that the crystallinity of stacks varies from stack to stack according to some distribution function P(j). Theoretical SAXS curves related to the assumed models were best fitted to the experimental curves and the parameters of stacks were determined. It was found that the second model gave much better fits then the model of Hosemann. Generally, the distribution function P(j) is asymmetric and positively skewed but its shape changes for the stacks crystallized at various temperatures. At higher temperatures, starting from the melting point, the crystallinity distribution can be well approximated by the Reinhold function. At lower temperatures, closer to the final solidification, the split Gauss function is a better approximation.
PL
Badano strukturę lamelarną kopolimerów etylen-1-okten podczas ich chłodzenia od temperatury topnienia do temperatury pokojowej. Parametry struktury wyznaczano na podstawie obliczeń modelowych, polegających na optymalnym dopasowywaniu teoretycznej krzywej rozpraszania SAXS, odpowiadającej założonemu modelowi struktury, do krzywej eksperymentalnej. W obliczeniach stosowano klasyczny model Hosemanna, zgodnie z którym wszystkie stosy lamelarne występujące w polimerze są statystycznie identyczne, oraz model zakładający niejednorodność struktury polimeru. Ten ostatni model zakładał, że stopień krystaliczności stosów jest zróżnicowany, a jego występowanie w objętości polimeru opisuje pewna funkcja rozkładu P(j). Badania wykazały, że nie jest możliwe uzyskanie dobrego dopasowania krzywych teoretycznych, opisanych zależnościami podanymi przez Hosemanna, do krzywych eksperymentalnych, co tym samym świadczy o nieadekwatności tego modelu w odniesieniu do badanych struktur. Zastosowanie drugiego modelu pozwoliło na uzyskanie bardzo dobrego dopasowania w całym zakresie rejestracji krzywych SAXS. Otrzymane wyniki świadczą o niejednorodnej strukturze stosów lamelarnych w badanych kopolimerach oraz o asymetrycznym charakterze rozkładu stopnia krystaliczności w stosach. W zakresie wysokich wartości temperatury, rozkład ten może być bardzo dobrze opisany za pomocą funkcji Reinholda. W zakresie niższych wartości temperatury, bliskich temperaturze końcowego zestalenia się kopolimeru, lepszym przybliżeniem jest tzw. składana funkcja Gaussa.
EN
Polymer degradation is a change in the properties of a polymer under the influence of one or more environmental factors such as heat, light, humidity or chemicals. These changes may be undesirable, such as changes during use, or desirable, as in biodegradation or deliberately lowering the molecular weight of a polymer. A series of composites of isotactic polypropylene (iPP) has been obtained by the melt intercalation by introducing certain additive into the molten polymer matrix using a twin-screw extruder. The effect of additives (multi-wall carbon nanotubes as nanofiller, montmorillonites, pigments) on the process of isotactic polypropylene degradation, thermal stability, the characteristic temperatures (of melting and crystallization) during the aging process were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). A additives affect the degradation mechanism and consequently change thermal stability of iPP (the most stable are samples with addition of carbon nanotubes). The additives also affect the crystallization of polypropylene and thus the crystallization temperature and crystallinity index of the base material.
PL
Degradacja polimeru to proces prowadzący do zmian właściwości polimeru, następujących pod wpływem jednego lub kilku czynników takich, jak: ciepło, światło, wilgotność lub chemikalia. Zmiany takie mogą być niepożądane, np. w czasie użytkowania, lub pożądane — celowe zmniejszenie ciężaru cząsteczkowego polimeru podczas biodegradacji. Serię kompozytów polipropylenu izotaktycznego (iPP) otrzymano na drodze interkalacji w stopie, wprowadzając określone dodatki do matrycy roztopionego polimeru, przy użyciu wytłaczarki dwuślimakowej. Wpływ dodatków (wielościennych nanorurek węglowych, montmorylonitów, pigmentów) na proces degradacji, stabilność termiczną, charakterystyczne wartości temperatury (topnienia i krystalizacji) izotaktycznego polipropylenu badano metodami analizy termograwimetrycznej (TGA) i różnicowej kalorymetrii skaningowej (DSC). Dodane napełniacze wpływają na mechanizm degradacji, a tym samym na stabilność termiczną iPP (najbardziej stabilne są próbki z dodatkiem nanorurek węglowych), a także na proces krystalizacji polipropylenu, a zatem i temperaturę krystalizacji oraz stopień krystaliczności.
PL
W pracy przedstawiono wyniki badań właściwości mechanicznych dla próbek wykonanych z poliamidu 6 z 30-procentową zawartością włókna szklanego PA6GF30 oraz jego mieszanin z regranulatem pochodzenia poprodukcyjnego. Badania prowadzono w celu scharakteryzowania wpływu dodatku regranulatu na udarność, wytrzymałość na zginanie, moduł Younga, wydłużenie oraz wytrzymałość na rozciąganie. Charakterystykę zmian zachodzących w materiale na poziomie cząsteczkowym oceniano przy zastosowaniu spektroskopii w podczerwieni z transformacją Fouriera (FTIR). Otrzymane wyniki jasno wskazują na istnienie negatywnego wpływu dodatku przemiału poprodukcyjnego na właściwości mechaniczne nowo otrzymanego materiału.
EN
In this work, the results of mechanical properties for test samples made of polyamide 6 with 30-percent glass fiber content and its compounds with regranulated origins of post-production. The study was conducted to characterize the influence of regrinding on impact strength, flexural strength, Young’s modulus, elongation and tensile strength. The changes which occurred in materials at the molecular level was monitored using FTIR spectroscopy. The results clearly indicate negative effect of the addition of milling post-production on the mechanical properties of the obtained material.
EN
It was investigated how the chemical structure of polylactide and the molecular characteristics of the polymer affect the deformability and strength properties of wet-spun fibres. Following a two-stage drawing process, a higher strength value of 396 MPa was recorded for fibres made from a copolymer of L-lactide with glycolide (PGLA), compared with poly-L-DL-lactide (PLDLA) fibres, whose value was 142 MPa. For both polymers it was found to be possible to perform an additional (third) stage of drawing, which was associated with an increase in their strength properties. For both polymers used, under previously optimised conditions of coagulation and plasticisation drawing, the extreme possible as spun draw ratio values at the spinning nozzle were established. This value, as well as the orientation of structural elements in the still liquid stream, determine the achievable value of the total draw ratio in the successive deformation processes, and the related strength properties of the fibres.
PL
W pracy zbadano wpływ budowy chemicznej polilaktydu i charakterystyki molekularnej polimeru na podatność na deformację i właściwości wytrzymałościowe włókien formowanych metodą z roztworu na mokro. Stwierdzono, iż po dwuetapowym procesie rozciągu wyższą wytrzymałością na poziomie 396 MPa odznaczają się włókna, których tworzywo stanowi kopolimer L-laktydu z glikolidem (PGLA) w porównaniu do włókien poli-L-DL-laktydowych (PLDLA) o wytrzymałości 142 MPa. Dla obu polimerów stwierdzono możliwość realizacji dodatkowego (trzeciego) etapu rozciągu, z czym związany był wzrost ich właściwości wytrzymałościowych. Dla obu stosowanych polimerów we wstępnie dobranych warunkach zestalania i rozciągu plastyfikacyjnego określono krańcowe warunki możliwego do stosowania wyciągu filierowego. Od jego wartości i orientacji elementów strukturalnych w jeszcze płynnej strudze, uzależniona jest maksymalna wartość rozciągu całkowitego w kolejnych procesach deformacyjnych i związane z tym właściwości wytrzymałościowe włókien.
PL
W artykule przedstawiono wpływ dadatków (nanorurki węglowe, montmorylonit oraz pigment) na proces degradacji polipropylenu. Kompozyty otrzymano poprzez wprowadzenie do matrycy polimerowej wybranego dodatku o różnym stopniu rozdrobnienia. Przeprowadzone badania miały na celu scharakteryzowanie wpływu zarówno promieniowania UV, podwyższonej temperatury jak i udziału wilgoci na proces degradacji polipropylenu. Charakterystykę przebiegu procesu starzenia prowadzono w określonych odstępach czasu ekspozycji na zadane warunki symulujące starzenie atmosferyczne. Badano zmiany zachodzące na powierzchni w skali makroskopowej i mikroskopowej oraz wizualnie oceniano stan badanych próbek pod względem estetycznym i użytkowym. Oceniano także zmianę barwy próbek. Otrzymane wyniki przedstawiają wpływ zastosowanych dodatków na tempo starzenia polipropylenu jak i rozmiar zniszczenia materiału pod wpływem synchronicznego działania promieniowania UV, temperatury i wilgoci, na własności wyrobów polipropylenowych oraz prezentują przykładowe sposoby kontroli trwałości polimerów w czasie ich eksploatacji w warunkach atmosferycznych.
EN
The paper presents influence of additives (carbon nanotubes, montmoryllonite, pigment) on the process of degradation of polypropylene. The composites were obtained by introduction of the selected additive to the polymer matrix with varying degree of refining. The study aimed in characterization the effect of UV radiation, elevated temperature and moisture on the degradation process of polypropylene. The characterization of the aging process was carried out at defined intervals of exposure time to the given factors, simulating atmospheric conditions. The changes were tested on the surface of samples in macro-and microscopic scale. The condition of tested samples was visually assessed in terms of aesthetic qualities, functionality and changes in their color. Results of these investigations show the effect of the additives on the rate of aging of polypropylene and degree of material damage due to synchronous operation of UV radiation, temperature and moisture on the properties of polypropylene and present the methods of polymer durability control during exploitation in outdoor conditions.
PL
W artykule przedstawiono wpływ dodatków (nanorurki węglowe jako nanonapełniacz, montmorylonit oraz pigment) na proces starzenia izotaktycznego polipropylenu (iPP). Kompozyty otrzymano metodą interkalacji w stopie poprzez wprowadzanie określonego dodatku do stopionej matrycy polimerowej. Badania prowadzono w celu scharakteryzowania wpływu wybranych napełniaczy na proces starzenia, pod kątem zmian w barwie i strukturze cząsteczkowej materiału. Charakterystykę przebiegu procesu starzenia prowadzono w określonych odstępach czasu ekspozycji na zadane warunki symulujące starzenie atmosferyczne. Dokonano także porównania zmian zachodzących w polipropylenie i kompozycie polipropylenu z glinokrzemianem przy różnych parametrach starzenia. Instrumentalną zmianę barwy prowadzono w celu oszacowania stopnia zniszczenia powierzchni (wpływ na estetykę wyrobów z iPP), a zmiany zachodzące w materiałach na poziomie cząsteczkowym (zanik pierwotnej struktury i pojawienie się nowych ugrupowań) kontrolowano przy zastosowaniu spektroskopii w podczerwieni z transformacją Fouriera (FTIR).
EN
The paper presents effect of additives (carbon nonotubes as nanofiller, montmoryllonites, pigment) on the process of isotactic polypropylene degradation. The composites were obtained by the melt intercalation by introducing certain additive into the molten polymer matrix. The study was conducted to characterize the influence of selected fillers on the aging process for changes in color and molecular structure of the material. The characteristic of the aging process was carried out at defined intervals of exposure, the answer to aging simulating atmospheric conditions. The changes in polypropylene and polypropylene composite with aluminosilicate that have occured at different parameters of aging was also compared. Instrumental color change was carried out to estimate the degree of surface damage (impact on the aesthetics of the iPP), and the changes occuring in materials at the molecular level (loss of the original structure and the emergence of new groups) was monitored using FTIR spectroscopy.
EN
In outdoor applications, all polymer materials weather which causes deterioration of their mechanical properties and has a negative influence on their appearance. In this article, the influence of UV irradiation and high temperature on polyamides PA6, PA6.6 and polypropylene PP and influence of aging parameters on their appearance (the state of surface) and chemical crystal structure have been shown. Microscopic examination of samples has shown that the biggest destruction in the surface of PP occurred in a short time after the beginning of the exposure. The examination of the surface and crystal structure of the materials clearly indicated that during exposure to UV irradiation and temperature degradation in PP materials occurred. Polyamides showed longer reaction time but after some time they also underwent radical changes in their supermolecular structure and they lost their esthetic appearance.
EN
Polymers, due to their versatility, have become indispensable in human life. In outdoor applications, all polymers degrade, resulting in a change in the properties of most polymers. Symptoms of polymer degradation include changes in esthetic appearance (e.g. discoloration, changes in gloss, chalking) and alteration of some specific polymer properties. In this study, polyamides 6 and 6.6 and polypropylene were subjected to UV irradiation and high temperature. The degradation was monitored using colour measurement and FTIR spectroscopy. The effect of deterioration in the material surface due to aging can be seen in its changes in colour (by altering its chemical structure), gloss and transparency. The colour measurement was performed in CIELAB system in tristimulus colour value L', a', b". FTIR spectroscopy measurements made it possible to show in a systematic way the changes in molecular structure of tested materials according to the process of aging, as well as possible mechanism of degradation.
EN
A computer program SAXDAT for the analysis of small angle X-ray scattering (SAXS) curves of semicrystalline polymers is described. The program is based on a lamellar stack model of polymer structure. In the program, the parameters of stacks can be determined from one-dimensional correlation function calculated as a Fourier transform of intensity distribution or by model calculations which consist in fitting of a theoretical intensity distribution function to the experimental curve. The program can be applied to single curves as well as to big sets of curves obtained from time resolved experiments. Both point and slit collimation recording systems are acceptable.
PL
W pracy opisano możliwości opracowanego przez autorów programu komputerowego SAXSDAT przeznaczonego do analizy krzywych małokątowego rozpraszania promieniowania rentgenowskiego (SAXS) otrzymanych podczas badań polimerów semikrystalicznych. Algorytmy programu wykorzystują zależności znane z teorii rozpraszania promieniowania rentgenowskiego przez polimery semikrystaliczne, opracowane przy założeniu lamelarnego modelu ich struktury wewnętrznej. Program może być stosowany do analizy pojedynczych krzywych SAXS otrzymanych w eksperymentach statycznych, przy użyciu klasycznych kamer małokątowych typu kamera Kratky'ego, jak też do wieloelementowych zbiorów krzywych otrzymywanych w eksperymentach dynamicznych prowadzonych z zastosowaniem promieniowania synchrotronowego. Jego istotną zaletą jest to, że może być używany do opracowania krzywych zarejestrowanych przy użyciu zarówno punktowego jak i szczelinowego systemu kolimacji wiązki pierwotnej. Jednym z głównych zadań programu jest wyznaczenie tzw. jednowymiarowej funkcji korelacyjnej charakteryzującej strukturę warstwowych domen wypełniających objętość polimeru. Na podstawie przebiegu tej funkcji, obliczane są wszystkie parametry charakteryzujące strukturę tych domen: grubość lamel krystalicznych i warstw amorficznych, wielki okres, objętościowy stopień krystaliczności domen, grubość obszaru przejściowego na granicy faz, inwariant idealny i rzeczywisty.
12
Content available remote Zinc Alginate Fibres with a Silica (SiO2) Nanoadditive
EN
Conditions were found for the manufacture of zinc alginate fibres with a silica (SiO2) nanoadditive based on earlier studies involving nanocomposite zinc alginate fibres with a TCP nanoadditive. In this study, we determined the effect of the basic parameters of the forming process, such as the as-spun draw ratio and associated deformation at the drawing stage, on the porous and supramolecular structure as well as sorption and strength properties of zinc alginate fibres with nanoadditive SiO2. A comparative analysis was made of the structure and properties of fibres containing nanoadditives tricalcium phosphate (TCP) and SiO2. The effect of the type of nanoadditive on the structure and properties of the fibres studied was determined.
PL
Opracowano warunki wytwarzania nanokompozytowych włókien z alginianu cynku z nanododatkiem krzemionki (SiO2) w oparciu o wcześniejsze badania nanokompozytowych włókien z alginianu cynku z nanododatkiem TCP. Określony został wpływ podstawowych parametrów procesu formowania, takich jak np. wyciąg filierowy i związana z tym deformacja w etapie rozciągu na strukturę porowatą, nadmolekularną, właściwości sorpcyjne oraz właściwości wytrzymałościowe włókien z alginianu cynku z nanododatkiem SiO2. Dokonano analizy porównawczej struktury i właściwości włókien zawierających nanododatki TCP i SiO2. Określono wpływ rodzaju wprowadzonego nanododatku na strukturę i właściwości badanych włókien.
EN
An investigation was made into the influence of the temperature of a coagulation bath and value of the as-spun draw ratio on the porous structure and strength properties of PAN fibres containing two nanoadditives. With the presence of hydroxyapatite in nanocomposite fibres, the transformation of paracrystalline regions, existing in fibers without nanoadditives in a crystalline structure, is connected. Carbon fibres were obtained from nanocomposite fibres. The mechanical properties of the carbon fibres obtained are good enough for medical applications. Based on SEM and EDX analyses, it was found that both nanoadditives are evenly distributed on the surface of precursor and carbon fibres.
PL
W pracy zbadano wpływ temperatury kąpieli koagulacyjnej oraz wartości wyciągu filierowego na strukturę porowatą i właściwości wytrzymałościowe włókien PAN zawierających w tworzywie układ dwóch nanododatków. Z obecnością hydroksyapatytu we włóknach nanokompozytowych związana była przebudowa obszarów parakrystalicznych, obecnych we włóknach bez nanododatku, w strukturę krystaliczną. Z włókien nanokompozytowych otrzymano włókna węglowe. Właściwości mechaniczne otrzymanych włókien węglowych są wystarczające do zastosowań medycznych. Na podstawie analizy SEM+EDS stwierdzono, iż oba nanododatki są dość równomiernie rozmieszczone na powierzchni włókien prekursorowych i węglowych.
PL
Rozwojowi zastosowań tworzyw sztucznych w różnych dziedzinach gospodarki i życia codziennego towarzyszy dyskusja na temat wynikających z tego faktu korzyści i potencjalnych zagrożeń. Przybierała ona na sile w miarę opracowywania i wdrażania nowych tworzyw z powodzeniem zastępujących używane do tej pory tradycyjne materiały, takie jak: metale, drewno, szkło czy ceramika.
EN
This work was dedicated to the investigation of the influence of the effect of carbon nanotubes on the porous and supramolecular structure of precursor polyacrylonitrile (PAN) fibres. A relationship was found between the structure of the fibers produced in a two-stage and three-stage drawing process and the strength properties of those fibres. The structural parameters and properties of PAN fibres modified with carbon nanotubes were compared with corresponding values for the fibres without nanoadditives. It was found that the introduction of carbon nanotubes into the material of PAN fibres increases their deformability at successive stages of drawing to a degree depending on the type of nanotube. This was the main reason for their higher strength properties in comparison with the fibres without a nanoadditive.
PL
W pracy zbadano wpływ rodzaju nanorurek węglowych na strukturę porowatą i nadmolekularną prekursorowych włókien poliakrylonitrylowych. Ustalono związek pomiędzy strukturą wytworzoną po dwu i trójetapowym procesie rozciągania, a właściwościami wytrzymałościowymi tych włókien. Parametry strukturalne i właściwości włókien PAN modyfikowanych nanorurkami węglowymi porównano z odpowiednimi wskaźnikami dla włókien niezawierających nanododatku. Stwierdzono, iż z wprowadzeniem do tworzywa włókien PAN nanorurek węglowych związane jest zwiększenie podatności na deformację w kolejnych etapach rozciągu w stopniu uzależnionym od rodzaju nanorurek. Stanowi to główną przyczynę ich wyższych właściwości wytrzymałościowych w porównaniu do włókien bez nanododatku.
PL
Praca zawiera wyniki badań wpływu promieniowania UV oraz temperatury na strukturę cząsteczkową wybranych materiałów polimerowych. Przyspieszone starzenie poliamidów oraz polipropylenu prowadzono przy użyciu komory klimatycznej Atlas Xsenon Weather Ometer serii Ci4000, stosując jako źródło promieniowania filtrowaną lampę ksenonową. Zachodzące zmiany w czasie procesu fotoutleniania monitorowano za pomocą metod FTIR i DSC. W badanych próbkach nastąpiły wyraźne zmiany w obszarach grup: hydroksylowej, karbonylowej a także w obszarze pasm krystalicznych poliamidów.
EN
In this work, the influence of UV radiation and temperature on the molecular structure of chosen polymeric materials was investigated . Accelerated weathering of polyamides and polypropylene was performed by means of the Atlas Xsenon Weather Ometer series Ci4000 climatic chamber, using filtered xenon lamp as a light source. The effects of photo-oxidation were studied by FTIR spectroscopy and DSC method . A clear changes were observed in the investigated samples in hydroxyl and carbonyl regions as well as in the crystalline regions of polyamide
18
Content available remote Wykorzystanie energii słonecznej w obiektach infrastruktury komunalnej
PL
Omówiono wykorzystanie kolektorów słonecznych do produkcji ciepłej wody, szczególnie na potrzeby budownictwa indywidualnego, także nowobudowanych obiektów rekreacyjno - sportowych na EURO 2012 oraz w ramach programu tworzenia zaplecza sportowego w gminach.
EN
The paper discusses the use of solar collectors for hot water production, especially for the construction of individual, newly built and recreational facilities - sports for EURO 2012 and also sports facilities in communes. The paper discusses the use of solar collectors for hot water production, especially for the construction of individual, newly built and recreational facilities - sports for EURO 2012 and also sports facilities in communes.
19
Content available remote Proekologiczne przedsięwzięcia w gospodarce paliwowo - energetycznej
PL
Artykuł ma charakter przeglądowy. Są w nim omówione, na podstawie oceny globalnych zagrożeń środowiska, możliwości zastosowania niektórych proekologicznych przedsięwzięć w gospodarce paliwowo - energetycznej z odniesieniami do warunków polskich.
EN
The article is a review. There are discussed the possibilities to apply some undertakings of the green fuel and energy economy with references to the polish conditions taking into account the evaluation of the threat to the global environment.
PL
Atak z użyciem broni masowego rażenia, w szczególności broni jądrowej, można przeżyć. Dlatego należy się do niego przygotować. Metody działania w warunkach skażeń spowodowanych użyciem różnych rodzajów broni masowego rażenia są na ogół odmienne, natomiast sposoby ochrony przed każdą z nich mają elementy wspólne.
first rewind previous Strona / 3 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.