Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 12

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This paper outlines a method of determining the deformation and strength parameters for a hypothetical, homogeneous, substitute material which approximates the properties of heterogeneous materials in reinforced concrete elements. The model of the substitute material creates a concrete reference model, in which the static - strength - deformation parameters were modified on the basis of the homogenizing function with the homogenization coefficient assumed as the effective reinforcement ratio of the reinforced concrete structural elements. The results of the comparative analysis of the numerical models using the hypothetical substitute material with experimental results for statically loaded beams and deep beams taken from the literature are presented.
PL
W pracy przedstawiono model hipotetycznego materiału zastępczego do analizy konstrukcji żelbetowych. Model ten opracowano z wykorzystaniem metodyki homogenizacji elementów żelbetowych. Podstawą metodyki homogenizacji elementów żelbetowych jest sposób określenia właściwości odkształceniowo – wytrzymałościowych materiału zastępczego. Sposób ten polega na modyfikacji parametrów dowolnego modelu betonu (tj. tak zwanego modelu referencyjnego), np. powszechnie stosowanego modelu materiału plastycznego zniszczenia opracowanego przez Lublinera i.in., zmodyfikowanego przez Lee and Fenvesa i włączonego do systemu oprogramowania Abaqus, z wykorzystaniem funkcji homogenizacyjnej Ph = Pc + Fh ⋅ Ps.
PL
W pracy przedstawiono analizę rozkładu obciążeń oraz ich wpływu na zginanie dwukierunkowe słupów w układzie płytowo-słupowym. Analizując rozkład reakcji, przedstawiono wyniki uwzględniające sposób podparcia. Przedstawiono wyniki wytężenia słupa środkowego dla różnych kombinacji obciążeń wg EC0, tj. na podstawie wzorów kombinacji globalnych (6.10) oraz lokalnych (6.10a i 6.10b). Analizę dla kombinacji globalnych przedstawiono również dla różnych typów słupów. W ostatnim rozdziale pracy przedstawiono wnioski dotyczące przeprowadzonej analizy.
EN
The paper presents an analysis of load distribution and their impact on the bidirectional flexural columns in a slab columnar system. By analyzing the distribution of the reaction the results showing the way of suport was presented. We presented the results of the effort of the center column for different load combinations by EC0, i.e. based on a combination of the global formulas (6.10) and the local formulas (6.10a i 6.10b). The analysis for the global combination for different types of columns also was presented. In the last chapter we presented analysis conclusions.
PL
Przedstawiono analizę porównawczą wyznaczania fal nadciśnienia procedur własnych z wynikami badań doświadczalnych oraz teoretycznymi innych autorów i procedur. Analizę parametrów wybuchu zewnętrznego przeprowadzono, uwzględniwszy różne masy ładunków i ich odległości od ściany oraz porównano z wynikami doświadczalnymi. Ciśnienie wybuchu wewnętrznego porównano z wynikami przy stałej masie ładunku, ale w przypadku różnych punktów pomiarowych. Podano sposób uwzględnienia zmiennych kątów padania fali nadciśnienia.
EN
The paper presents the comparative analysis of the determination of overpressure waves procedures authors with the experimental and the theoretical other authors and procedures results. We presented the general characteristics of the internal and external impact of the explosion. Analysis has been performed for the external explosion for different mass loads and their distance from the wall, and compared with the experimental results. While the pressure of an internal explosion is compared to a constant weight load, but different measuring points. In the paper included how to take into account the variable angles of arrival overpressure wave.
PL
W pracy zawarto rozważania dotyczące stosowania przypadków normowych obciążenia śniegiem dachów płaskich z attykami według normy Eurokod 1. Przedstawiono sposób wyznaczania obciążeń śniegiem zgodny z normą PN-EN 1991–1-3:2005 wraz z późniejszymi zmianami. Przeprowadzono analizę porównawczą wytężenia stropodachów dla trzech przypadków obciążenia. Analizę porównawczą przeprowadzono numerycznie z wykorzystaniem oprogramowania systemowego ABC 6.15. Analizie poddano płaski stropodach, monolityczny, żelbetowy, krzyżowo-zbrojony. Przedstawiono wyniki momentów zginających dla trzech przypadków obciążenia śniegiem. W pracy odniesiono się również do typowych stosowanych w Polsce stropodachów prefabrykowanych typu TERIVA.
EN
The present work contains considerations related to application of norm cases, related to snow-load on flat roofs with attics, according to the provisions of the Eurocode 1 norm. The snow-load determination method has been presented. The method has been developed in line with the PN-EN 1991-1-3:2005 norm, along with the further amendments. In the further part of the article, the summarizes the comparative stress analysis for flat roofs, for three load cases. The analysis contained in the article has been carried out numerically, with the use of the ABC 6.15 software. A flat monolithic, ferro-concrete crossreinforced roof is the subject of that analysis. The work also presents the results for the bending momentum values, for three snow-load cases. The work also makes a reference to the typical TERIVA flat roofs that are widely and commonly applied in Poland.
PL
W pracy zawarto analizy numeryczne tarczy żelbetowej modelowanej z wykorzystaniem hipotetycznego modelu jednorodnego materiału zastępczego. Wyznaczono parametry statyczno-odkształceniowo-wytrzymałościowe materiału zastępczego dla rozważanej tarczy żelbetowej. W analizach dynamicznych uwzględniono współczynnik dynamiczny wytrzymałości hipotetycznego materiału zastępczego. Przeprowadzono analizę numeryczną w zakresie obciążeń statycznych oraz dynamicznych. Wyniki analizy numerycznej pod obciążeniem statycznym porównano z wynikami doświadczalnymi Leonhardta i Walthera oraz innymi wynikami numerycznymi. Wyniki analizy numerycznej pod obciążeniem dynamicznym porównano również z wynikami innych analiz teoretycznych Cichorskiego i Stolarskiego.
EN
This paper contains the numerical analysis of reinforced concrete deep beam modelled using a hypothetic model of the homogeneous substitute material. The static-strain-strength parameters of the substitute material for the considered reinforced concrete deep beam were determined. The dynamic strength coefficient for hypothetic substitute material was taken into account in the dynamic analyzes. Numerical static and dynamic analysis is presented in this work. Solution of the numerical static analysis was compared with Leonhardth’s and Walther’s experimental results and other numerical results taken from literature. Solution of the numerical dynamic analysis was compared with numerical results by Cichorski and Stolarski.
PL
W pracy zawarto analizy numeryczne belek żelbetowych modelowanych z wykorzystaniem hipotetycznego modelu jednorodnego materiału zastępczego. Wyznaczono parametry statyczno-odkształceniowo-wytrzymałościowe materiału zastępczego dla rozważanych belek żelbetowych. Przeprowadzono analizę numeryczną w zakresie obciążeń statycznych oraz dynamicznych. Wyniki analizy numerycznej pod obciążeniem statycznym porównano z wynikami doświadczalnymi Buckhouse’a oraz innymi wynikami numerycznymi. Wyniki analizy numerycznej pod obciążeniem dynamicznym porównano z wynikami doświadczalnymi Emricha, Hertera i Puffera oraz wynikami innych analiz teoretycznych. W analizach dynamicznych uwzględniono stały współczynnik dynamiczny wytrzymałości hipotetycznego materiału zastępczego.
EN
This paper contains the numerical analysis for reinforced concrete beam modelled with using a hypothetical model of the homogeneous substitute material. The static-strain-strength parameters of the substitute material for considered reinforced concrete beams were determined. Numerical static and dynamic analysis is presented in this work. Solution of the numerical static analysis was compared with the experimental Buckhouse’s (1997) results and other numerical results taken from literature. Solution of the numerical dynamic analysis was compared with experimental Emrich’s, Herter’s and Puffer’s (1982) results and other numerical results. The constant dynamic strength coefficient for hypothetical substitute material was taken into account in the dynamic analyzes.
PL
W pracy zawarto rozważania dotyczące wykorzystania kombinacji obciążeń zgodnie z normą PN-EN 1990:2004 [1] oraz przedstawiono analizę wpływu zastosowania współczynników zmniejszających obciążenie na przykładzie budynku 7-kondygnacyjnego. W pierwszej części pracy rozważono stany graniczne nośności dla kombinacji globalnych. W dalszej części pracy zawarto wyznaczenia kombinacji lokalnych dla stanów granicznych nośności oraz kombinację obciążeń stosowaną dla stanu granicznego użytkowalności. Następnie przedstawiono przykład wyznaczania wartości współczynników dla kombinacji globalnych oraz stanu granicznego użytkowalności.
EN
The present work includes deliberations related to combination of loads, in accordance with the PN-EN 1990:2004 [1] norm. The article presents an analysis of the impact of the coefficients, which decrease the load. The example used is a 7-storey building. The first section of the work considers the limit loads for the global combination. Further part includes calculations regarding the local combinations for the limit loads used in case of the limit state of usability. Next, an example of determining the coefficient values for the global combinations and the usability limits has been shown.
PL
W pracy przedstawiono metodykę wyznaczania parametrów wytrzymałościowych i odkształceniowych dla hipotetycznego modelu jednorodnego materiału zastępczego w żelbetowym przekroju poprzecznym poddanym czystemu zginaniu. Parametry te określono na podstawie proponowanej funkcji homogenizacyjnej z wykorzystaniem efektywnego stopnia zbrojenia przekroju żelbetowego. Przeprowadzono analizę porównawczą zależności moment–krzywizna zastępczego przekroju poprzecznego i przekroju żelbetowego zginanego.
EN
The paper presents the methodology for determination of strength and deformation parameters for a hypothetical model of homogeneous substitute material in the reinforced concrete cross section subjected to pure bending. These parameters were determined on the basis of the proposed homogenizing function using the effective reinforcement ratio of a reinforced concrete cross-section. A comparative analysis of the moment–curvature relation for the substitute cross-section and reinforced concrete bent cross-section was carried out.
PL
W pracy przedstawiono sposób określania oddziaływania wybuchu zewnętrznego na przegrody budowlane. W rozważaniach oddziaływania wybuchu zewnętrznego wykorzystano różne procedury znane w literaturze, na podstawie których opracowano stabelaryzowany algorytm postępowania przy wyznaczaniu charakterystyk oddziaływania na przegrody budowlane. Uwzględniono podstawowy podział faz oddziaływania wybuchu na fazę nadciśnienia i podciśnienia. Wyznaczono parametry fali podmuchowej, uwzględniając podział na strefy wybuchu: bliską i daleką. Dla poszczególnych stref przedstawiono sposoby wyznaczania ciśnienia początkowego fali odbitej, czasy trwania nadciśnienia oraz przebieg zmienności obciążenia w czasie.
EN
The paper presents a method for determination of the action of an external explosion on building barriers. We used different procedures, known in the literature, for analysis of action of an external explosion. These procedures were the basis of tabulated algorithm for determination of the characteristics of the explosion action on the building barriers. We considered the basic division of phases of explosion action onto overpressure phase and underpressure phase. We determined blast wave parameters considering the division of explosion zone onto the close zone and distant zone. For each zone, we presented the methods of determination of the initial pressure of the reflected wave, time durations of overpressure phase, and the load variation in time.
PL
W pracy rozważono oddziaływanie wybuchu wewnętrznego na przegrody budowlane. Wyznaczenie maksymalnej wartości ciśnienia szczytowego na czole fali wybuchu wewnętrznego przedstawiono na podstawie analizy fal odbitych. Zmienność wczasie oddziaływania wybuchu wewnętrznego opisuje wyłącznie fazę nadciśnienia. Analizę obciążenia od detonacji ładunku wewnętrznego przeprowadzono dla warunków niezaburzonej atmosfery standardowej (MAS). Opracowano stabelaryzowany algorytm wyznaczania obciążeń uwzględniający charakterystyki geometryczne przegród budowlanych i pomieszczeń, w których następuje detonacja, oraz parametry ośrodka wybuchu.
EN
In this paper we considered the action of an internal explosion onto building barriers. Determination of the maximum peak pressure on the forehead of an internal wave explosion was presented on the basis of the analysis of reflected waves. Variability in time of the action of an internal explosion describes overpressure phase only. Load analysis of internal cargo detonation was carried out for the standard atmosphere undisturbed conditions. We developed the tabulated algorithm for determination of loadings taking into account the geometric characteristics of the building barriers and rooms in which the detonation occurs and parameters of explosion environment.
PL
Przedstawiono założenia i rozwiązania projektowe do kompleksowej modernizacji kotła oraz instalacji przyjęcia, magazynowania biomasy wraz z przygotowaniem i dystrybucją pyłu biomasowego do niskoemisyjnych palników wirowych kotła OKPG-60. Po ponad rocznej eksploatacji zmodernizowanego kotła OKPG-60 opisano wyniki doświadczeń eksploatacyjnych i wprowadzone zmiany konstrukcyjn w Zakładzie Elektroenergetycznym H. Cz. ELSEN S.A. w Częstochowie.
EN
Presented are project assumptions and solutions for a complex boiler modernization as well as for the biomass reception and storage, including preparation and distribution of biomass dust for the low NO, dust swirl burners of the boiler OKPG-60. Described are experience results gathered during more than one year of boiler operation and construction changes introduced by Zakład Elektoenergetyczny H.Cz.ELSEN S.A. in Częstochowa.
12
PL
Celem pracy jest opracowanie modeli numerycznych budynków oraz przeprowadzenie analizy wytężenia budynków pod wpływem działania obciążeń wyjątkowych. Na podstawie naziemnego skaningu laserowego, dokumentacji archiwalnej oraz przeprowadzonej inwentaryzacji budowlanej opracowano dyskretne modele obliczeniowe konstrukcji budynków, wykorzystując możliwości programu metody elementów skończonych. Przeprowadzono analizę stanu wytężenia konstrukcji budynków pod działaniem obciążeń wybuchowych. Praca zawiera również analizę zachowania konstrukcji po usunięciu elementów uszkodzonych w wyniku oddziaływania wybuchu ładunku materiału wybuchowego.
EN
The elaboration of the numerical models of building objects is the aim of the paper as well as execution of the analysis of effort of the buildings under the influence of the accidental loadings. Using the possibilities of the program of the finite element method, the discreet computational model of the buildings construction were worked out on the basis of ground-based laser scanning, archival documentation and conducted inventory control. The analysis of the effort state of the construction of buildings for explosive loadings was conducted. The paper also contains the analysis of the construction behaviour after removal of elements damaged in the result of the explosion action of the explosive material charge.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.