Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 6

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This paper presents results from the application of [Cu(TNBI)(NH3)2(H2O)] (CuTNO) to heterogeneous solid rocket propellants based on HTPB/AP, replacing RDX. A series of different compositions of solid heterogeneous rocket propellants based on HTPB and ammonium perchlorate, containing CuTNO or RDX, were prepared and investigated. The ballistic parameters of the examined propellants were determined by combustion in a laboratory rocket motor (LRM). The ballistic properties were evaluated in the pressure range 4-10 MPa and it was found that the linear burning rate at 10 MPa increased by more than 20% for the CuTNO containing propellant, compared to the RDX-based composition. By linear regression of the r = f(p) curves obtained, the burning laws for the investigated propellants were determined. It was found that the CuTNO additive increases the pressure coefficient by over 46%, compared to unmodified propellant. The determination of the sensitivities to friction and impact, the calorific value, hardness and decomposition temperature of the propellants obtained were also investigated.
PL
Przedstawiono wstępną ocenę zastosowania soli kwasu azotowego(V) w stałych heterogenicznych paliwach rakietowych (SHPR) o obniżonej zawartości HCl w produktach spalania, opartych na układzie HTPB/NA (polibutadien zakończony grupami hydroksylowymi/chloran(VII) amonu). Wykorzystując program ICT-Code, określono teoretycznie właściwości termochemiczne i termodynamiczne proponowanych paliw, takie jak izochoryczne ciepło spalania (Q), impuls właściwy (Isp) oraz skład produktów spalania w komorze i dyszy silnika rakietowego. Wybrano 5 kompozycji SHPR o zawartości 0.3-1% HCl w produktach spalania i wykonano je w skali laboratoryjnej. Uzyskane paliwa spalano w mikrosilniku rakietowym w celu wyznaczenia właściwości balistycznych. Metodami eksperymentalnymi wyznaczono właściwości reologiczne i takie parametry, jak izochoryczne ciepło spalania, temperatura rozkładu oraz wrażliwość na bodźce mechaniczne.
EN
Nine solid rocket propellants consisting of a com. rubber binder, NH₄NO₃, NaNO₃, KNO₃, Al/Mg and Al powders, dimeryl diisocyanate and dioctyl adipate were characterized by thermodynamic calculations. Three of the propellants were tested exptl. for friction and impact sensitivities, hardness, calorific value, decompn. temp., and combustion time. The emission of HCl in the combustion product was decreased down to below 1%.
PL
W pracy przedstawiono wpływ kruszących materiałów wybuchowych: heksogenu (RDX), oktogenu (HMX), oraz dinitro diaminoetenu (FOX-7), na właściwości heterogenicznego stałego paliwa rakietowego (HSPR) na bazie HTPB, w którym chloran(VII) amonu (NA) został częściowo zastąpiony azotanem(V) sodu (AS). W wyniku wprowadzenia azotanu(V) sodu zawartość HCl w produktach spalania paliw zmniejszyła się. W programie ICT-Code wyznaczono teoretyczne wartości właściwości termochemicznych i termodynamicznych paliw, takie jak izochoryczne ciepło spalania (Q), impuls właściwy (Isp) i skład produktów spalania w komorze oraz dyszy silnika. Zbadano właściwości reologiczne (lepkość pozorną) zawiesin paliw podczas procesu ich utwardzania, wrażliwość utwardzonych paliw na bodźce mechaniczne (uderzenie, tarcie), temperaturę rozkładu, kaloryczność, twardość oraz właściwości balistyczne paliw zawierających materiały wybuchowe za pomocą laboratoryjnego silnika rakietowego (LSR).
EN
The paper describes an influence of high explosives: hexogene (RDX), octogene (HMX), and dinitro-diaminoethene (FOX-7) on the properties of heterogeneous solid rocket propellant (HSRP) prepared on the base of Hydroxy Terminated Polybutadiene (HTPB) in which ammonium perchlorate (AP) was partially replaced by sodium nitrate (SN). It reduced the content of HCl in combustion products. Theoretical values of thermochemical and thermodynamic properties such as isochoric combustion heat (Q), specific impulse (Isp) and contents of combustion products in motor combustion chamber and nozzle have been identified by using the ICT-Code program. The rheological properties (virtual viscosity) of the propellant slurry during curing process, the sensitivity to mechanical stimuli (impact, friction), decomposition temperature, calorific value and hardness of propellants containing explosive materials were tested by instruments and ballistic properties were investigated by laboratory rocket motor (LRM).
PL
W pracy przedstawiono wpływ takich dodatków jak: glin, magnez, pył aluminiowo-magnezowy (PAM) i boru na właściwości heterogenicznego stałego paliwa rakietowego (HSPR) na bazie HTPB, w którym chloran(VII) amonu został częściowo zastąpiony azotanem(V) sodu. Wprowadzając w skład paliw azotan(V) sodu zawartość chorowodoru (HCl) w produktach spalania zmniejszyła się. Za pomocą programu ICT-Code wyznaczono teoretyczne wartości właściwości termochemicznych i termodynamicznych takie jak izochoryczne ciepło spalania (Q), impuls specyficzny (Isp) i produkty spalania w komorze i dyszy silnika. W celu wyznaczenia właściwości balistycznych otrzymane paliwa spalono w laboratoryjnym silniku rakietowym (LSR). Zbadano właściwości reologiczne (lepkość pozorną) zawiesiny paliwa podczas procesu utwardzania, wrażliwość na bodźce mechaniczne (uderzenie, tarcie), temperaturę rozkładu, ciepło spalania i twardość.
EN
The paper presents influence of additives like aluminium, magnesium, AMD (aluminium-magnesium dust) and boron on selected properties of heterogeneous solid rocket propellants (HSRP) based on HTPB in which ammonium (VII) chlorate was partly replaced by sodium(V) nitrate. The presence of sodium(V) nitrate reduces the content of hydrogen chloride (HCl) in combustion products. Theoretical values of thermochemical and thermodynamical properties like isochoric heat of combustion (Q), specific impulse (Isp) and combustion products in motor chamber and nozzle were identified by ICT-Code program. A laboratory rocket motor (LRM) was used to examine ballistic properties for prepared samples of propellants. Their temperature of decomposition, heat of combustion and hardness were tested both with sensitivity to mechanical stimuli (impact, friction) and rheological properties at curing.
EN
This paper presents the results of investigations into the use of 56 nm nano iron(III) oxide as a combustion rate modifier in a solid heterogeneous rocket propellant (SHRP). A series of solid heterogeneous rocket propellants based on HTPB and ammonium perchlorate with different nano iron(III) oxide contents in the propellant composition were prepared and investigated. The ballistic parameters of the examined propellants were determined by combustion in a laboratory rocket motor (LRM). The ballistic properties were evaluated in the pressure range 5-10 MPa. It was found that the linear burning rate at 7 MPa was increased by 15% for 1% nano iron(III) oxide content in comparison to 0.2% content. Determination of the sensitivity to friction and impact, the calorific value, hardness and decomposition temperature of the derived propellants were also investigated.
PL
Omówiono wpływ środków utwardzających na właściwości fizykochemiczne i fizykomechaniczne stałych niejednorodnych paliw rakietowych na bazie α,ω-dihydroksypolibutadienu oraz chloranu(VII) amonu.
EN
Three com. curing agents were added to solid heterogeneous propellants based on dihydroxypolybutadiene and NH₄ClO₄. Calorific value, decompn. temp., pot life, hardness, friction and impact sensitivity of the propellants were detd. The calorific value and pot life depended strongly on the curing agent used.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.