Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 18

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The article presents considerations regarding the possibility of recovering braking energy of a rail vehicle. The energy parameters obtained during acceleration and braking of the loaded railbus were taken as input data. It was found that over 13 kWh of energy was lost irretrievably in the braking resistors. Due to the speed of the discussed process, capacitors with an original design were proposed for energy recovery. For the purposes of this study, electrodes were fabricated using carbon derived from lignin carbonization at two distinct temperatures: 900°C and 1000°C. Based on the electrochemical tests carried out, it was found that the second proposed solution achieves a significantly better power-to-weight ratio – 13 kW/kg.
EN
Research work on the new assessment of environmental indicators using equipment from the PEMS group (Portable Emission Measurement Systems) with motor vehicles is being developed. Due to the miniaturization of equipment, there are new measurement possibilities for more and more numerous groups of vehicles, including two-wheelers. The article presents the research and a summary of the results of a moped equipped with a two-stroke engine, approved in accordance with the Euro 3 standard. The research object is mainly used for driving in urban traffic. Therefore, the research route was created as the first communication frame in the Poznań agglomeration. In the analysis of the results, the author’s M toxicity index was proposed, which is based on the assumption that CO2 emission is a measure of the correctness of the combustion process. The equipment from the PEMS-AxionR/S+ group, characterized by small dimensions and low weight, was used to determine the actual motion parameters and the emission of toxic compounds. In the analysis of the measurement results, dimensionless indicators of toxicity M of gaseous compounds were determined and a comparative analysis was made with the values of other objects obtained in the course of previous research (motorcycle, passenger car, off-road vehicle, hybrid bus and agricultural tractor). Due to the engine design (two-stroke type), the worst environmental indicators were obtained for CO and HC compared to other tested vehicles.
EN
The paper presents the problem of testing vehicles, which are some of the main sources of air pollution. The authors suggested the remote-sensing method as a tool for the measurement of the vehicle exhaust emissions and an on-going control thereof. This is an economical solution that allows measuring a large number of vehicles in a short time. The presented work aims at an experimental validation of the measurement method of exhaust emissions on the example of a two-wheeler. To that end, two parallel laboratory tests were carried out: measurement of the exhaust emissions obtained directly from the tailpipe using the PEMS (Portable Emission Measurement System) equipment and from the exhaust cloud, utilizing a module emission gate. A significant mutual correlation of the results confirms the efficiency of the method. The highest value of the coefficient of determination was obtained for the CO2, PM and NO analyzers. Different orders of values were primarily caused by the dissipation of the exhaust gas and the influence of the ambient conditions on the measurement process. Further works are therefore necessary to allow an assessment of the actual measurement uncertainty of the equipment irrespective ofthe fueling system and type of vehicles.
EN
The article discusses issues related to the assessment of pollutant emissions from a railbus during transport work. The test object was a rail vehicle equipped with two diesel engines with a total power of 780 kW, Stage IIIB homologated. Measurements were carried out on the route Poznań-Wągrowiec in two directions. During the tests, the vehicle performed a transport service, where the number of passengers was counted. For the completed cycles, the average number of people was 82 and 18. Based on the obtained data, the vehicle operating conditions and emission indicators were analyzed, which were related to the number of passengers. A dimensionless toxicity index was also determined.
EN
The paper presents the proposed proprietary M exhaust emission indicator, which is based on the assumption that CO2 emissions are a measure of the correctness of the combustion process. The measurements were performed using a farm tractor meeting the Tier 3 emission norm, operated in real conditions during plowing work. The tests were carried out for a given land section at three speeds In the analysis of test results, the net engine work was used, as it is carried out in the type approval procedures. When measuring in real operating conditions, the torque read from the OBD system is overstated because it takes into account the engine’s internal resistance. In the analysis of test results, the fuel consumption, emission indicators of gaseous compounds and particulates were determined, and the best conditions for conducting agricultural works were indicated in terms of their impact on the natural environment. The aim of the work is to verify the possibility of determining the emission index for an off-road vehicle and a comparative analysis of its values for various operating parameters of a farm tractor. On this basis, it was found that the lowest values of the M identity were recorded for the test characterized by a vehicle speed of 15 km/h.
EN
The subject of the article is proposed proprietary M toxicity indicator, which is based on the assumption that CO2 emissions are a measure of the correctness of the combustion process. For this purpose, gaseous exhaust compounds such as hydrocarbons, nitrogen oxides, carbon monoxide and carbon dioxide were measured and analyzed. The test object was a motorcycle, equipped with an gasoline engine with a displacement of 0.7 dm3 and a maximum power of 55 kW. The tests were carried out using the PEMS (Portable Emissions Measurement System) AxionR/S+. The exhaust emissions measurement was done in line with the WMTC (World Motorcycles Test Cycle) certification test, dedicated to vehicles in this category. The test consists of three parts, each of them lasts 600 s and has a different maximum speed value. The test was performed on a single-roller chassis dynamometer, designed for testing two-wheeled vehicles. The toxicity indicators and rotation speed results were presented as a function of time.
EN
The article presents the tests and analysis of ecological indicators of two rail-road tractors carried out during the real operation. The conditions of tests and vehicle constructions were characterized by the similar parameters, while the objects met the different exhaust gas emission standards: Stage IIIB and Stage IV. Apparatus from the PEMS group was used in the tests. In the analysis of ecological indicators, the unit emission of harmful gaseous compounds and particulates was determined. The supplementation is the assessment of toxicity indicators, which are the reference of individual compounds to CO2 emission. More favourable ecological characteristics were obtained by a vehicle meeting the newer exhaust gas emission standard, which resulted mainly from the use of advanced exhaust gas treatment systems in its construction.
PL
W artykule zaprezentowano badania i analizę wskaźników ekologicznych dwóch ciągników szynowo-drogowych zrealizowane podczas rzeczywistej eksploatacji. Warunki testów i konstrukcje pojazdów charakteryzowały się zbliżonymi parametrami, przy czym obiekty spełniały odmienne normy emisji spalin: Stage IIIB i Stage IV. W badaniach zastosowano aparaturę z grupy PEMS. W analizie wskaźników ekologicznych wyznaczono jednostkową emisję szkodliwych związków gazowych i cząstek stałych. Uzupełnienie stanowi ocena wskaźników toksyczności, będących odniesieniem poszczególnych związków do emisji CO2. Korzystniejsze charakterystyki ekologiczne uzyskał pojazd spełniający nowszą normę emisji spalin, co wynikało przede wszystkim z zastosowania w jego konstrukcji zaawansowanych układów oczyszczania spalin.
PL
Poprawa stanu środowiska naturalnego wymaga coraz nowszych sposobów na obniżenie emisji związków szkodliwych spalin emitowanych przez pojazdy. Jednym z nich jest zastąpienie wyeksploatowanych lokomotyw manewrowych ciągnikami szynowo-drogowymi. Pojazdy takie przystosowane są do przetaczania wagonów, a ich konstrukcja zapewnia dużą funkcjonalność przy niskich kosztach eksploatacji. Głównym celem tego zabiegu jest zmniejszenie negatywnego oddziaływania pojazdu na środowisko i redukcja zużycia paliwa w porównaniu do lokomotywy wykonującej tę samą pracę. Badania emisyjności spalin testowanego pojazdu przeprowadzono podczas rzeczywistych warunków eksploatacji, dzięki czemu uzyskane wyniki są bardziej miarodajne.
PL
W artykule przedstawiono elementy składowe systemu CL (Contact Line) umożliwiającego pomiar energii pobranej i oddanej do sieci trakcyjnej, pozwalający na precyzyjny pomiar oraz zarządzanie i rozliczanie energii elektrycznej dla pojazdów szynowych. Przywołano najważniejsze normy i wymagania przeprowadzania testów dla pojazdów kolejowych i drogowych przeznaczonych do transportu osób. Zaprezentowano wyniki badań dla elektrycznego autobusu miejskiego przeprowadzone wg autorskiej procedury badawczej, opracowanej przez IPS „Tabor”, która wykorzystywana jest w postępowaniach przetargowych na dostawy autobusów elektrycznych do polskich miast. Pozwala ona na wyznaczanie całkowitej energii pobieranej przez autobus, która jest sumą energii pobieranej i energii oddawanej podczas procesu rekuperacji do zasobników energii. Badania przeprowadzono według opracowanego przez stowarzyszenie International Association of Public Transport testu jezdnego SORT 2, dla którego definiowana jest średnia prędkość jazdy, długość trasy i czas pokonywania przejazdu, co odzwierciedla warunki eksploatacji występujące na typowej trasie miejskiej. Podczas badań uwzględniono stan naładowania akumulatorów – zmiana stanu naładowania akumulatorów przed i po teście była bliska 0 zgodnie z SAE J2711.
EN
The article presents the components of the CL (Contact Line) system allowing for the measurement of energy collected and given to the traction network allowing for precise measurement and management and electricity accounting for rail vehicles. The most important standards and test requirements for railway and road vehicles allowing for the transport of persons were recalled. The results of tests for the electric city bus carried out according to proprietary research procedure developed by IPS „Tabor”, which is used in tender proceedings for the supply of electric buses to Polish cities. It allows you to determine the total energy consumed by the bus, which is the sum of energy consumed and energy returned during the recuperation process to the energy stores. The tests were carried out according to the SORT 2 driving test developed by the communication operator International Association of Public Transport, for which the average speed, route length and time of passing are defined, which reflects the operating conditions of a typical urban route. During the tests, the state of charge of the batteries was taken into account, so that it was the same and the change in the state of charge of the batteries before and after the test was close to 0 according to SAE J2711.
EN
Road transport holds for the largest share in the freight transport sector in Europe. This work is carried out by heavy vehicles of various types. It is assumed that, in principle, transport should take place on the main road connections, such as motorways or national roads. Their share in the polish road infrastructure is not dominant. Rural and communal roads roads are the most prevalent. This fact formed the basis of the exhaust emissions and fuel consumption tests of heavy vehicles in real operating conditions. A set of vehicles (truck tractor with a semi-trailer) meeting the Euro V emission norm, transporting a load of 24,800 kg, was selected for the tests. The research was carried out on an non-urban route, the test route length was 22 km. A mobile Semtech DS instrument was used, which was used to measure the exhaust emissions. Based on the obtained results, the emission characteristics were determined in relation to the operating parameters of the vehicles drive system. Road emission, specific emission and fuel consumption values were also calculated.
EN
The article presents methods for measuring fuel consumption and electricity used in tests of rolling stock, buses, trolleybuses and trams. Based on the results of the performed experiments, the limitations of currently used research methods have been described and possible solutions have been proposed.
PL
W artykule przedstawiono metody pomiaru zużycia paliwa i energii elektrycznej stosowane w badaniach taboru kolejowego, autobusów, trolejbusów oraz tramwajów. Na podstawie zebranych doświadczeń opisano ograniczenia stosowanych obecnie metod badawczych i wskazano możliwe rozwiązania.
PL
W artykule przedstawiono elementy składowe systemu CL (Contact Line) pozwalającego na pomiar energii pobranej i oddanej do sieci trakcyjnej pozwalający na precyzyjny pomiar oraz zarządzanie i rozliczanie energii elektrycznej dla pojazdów szynowych. Przywołano najważniejsze normy i wymagania przeprowadzania testów dla pojazdów kolejowych i drogowych pozwalających na transport osób. Zaprezentowano wyniki badań dla elektrycznego autobusu miejskiego przeprowadzone wg autorskiej procedury badawczej opracowanej przez IPS „Tabor”, która wykorzystywana jest w postępowaniach przetargowych na dostawy autobusów elektrycznych do polskich miast. Pozwala ona na wyznaczanie całkowitej energii pobieranej przez autobus, która jest sumą energii pobieranej i energii oddawanej podczas procesu rekuperacji do zasobników energii. Badania przeprowadzono według opracowanego przez stowarzyszenia International Association of Public Transport testu jezdnego SORT 2, dla którego definiowana jest średnia prędkość jazdy, długość trasy i czas pokonywania przejazdu, co odzwierciedla warunki eksploatacji występujące dla typowej trasy miejskiej. Podczas badań uwzględniono stan naładowania akumulatorów – zmiana stanu naładowania akumulatorów przed i po teście była bliska 0, zgodnie z SAE J2711.
EN
The article presents the components of the CL (Contact Line) system allowing for the measurement of energy collected and given to the traction network allowing for precise measurement and management and electricity accounting for rail vehicles. The most important standards and test requirements for railway and road vehicles allowing for the transport of persons were recalled. The results of tests for the electric city bus carried out according to proprietary research procedure developed by IPS "Tabor", which is used in tender proceedings for the supply of electric buses to Polish cities. It allows you to determine the total energy consumed by the bus, which is the sum of energy consumed and energy returned during the recuperation process to the energy stores. The tests were carried out according to the SORT 2 driving test developed by the communication operator International Association of Public Transport, for which the average speed, route length and time of passing are defined, which reflects the operating conditions of a typical urban route. During the tests, the state of charge of the batteries was taken into account, so that it was the same and the change in the state of charge of the batteries before and after the test was close to 0 according to SAE J2711.
13
Content available remote Exhaust emissions from a EURO 6c compliant PC vehicle in real operating conditions
EN
The current EURO 6c standard has introduced a limit on the number of solid particles for spark ignition engines equal to that for compression ignition engines (6x10e11). To meet the requirements, manufacturers install particulate filters in the exhaust systems of most new engines. The article presents the results of vehicle testing with this solution during the drive carried out in accordance with the RDE procedure. The measurement results, after taking into account the Conformity Factor in relation to the approval limits, confirmed the efficiency of aftertreatment system in terms of both gas and solid components.
PL
Obecna norma EURO 6c wprowadziła limit liczby cząstek stałych dla silników z zapłonem iskrowym równy temu dla silników z zapłonem samoczynnym (6x10e11). By spełnić wymagania, producenci instalują filtry cząstek stałych w układach wylotowych większości nowych silników. W artykule przedstawiono wyniki badań pojazdu z tym rozwiązaniem podczas przejazdu przeprowadzonego zgodnie z procedurą RDE. Wyniki pomiarów po uwzględnieniu współczynnika Conformity Factor w stosunku do limitów homologacyjnych potwierdziły skuteczność oczyszczania spalin zarówno pod względem emisji składników gazowych, jak i cząstek stałych.
EN
The type approval tests of vehicles with internal combustion engines increasingly include issues regarding the assessment of ecological indicators in real traffic conditions. This is done with the help of specialized equipment from the PEMS (Portable Emissions Measurement Systems) group. This requires not only a series of test procedures, but also assembly of technically advanced equipment along with the proper preparation of the vehicle's exhaust system. Currently, activities are being carried out to develop solutions for non-invasive assessment of ecological indicators from moving vehicles. The article discusses these types of solutions, at the same time indicating their strengths and weaknesses. Also presented are pollutant emission tests in real operating conditions that will be used to develop a modular exhaust emission gateway. The result of the analysis was to indicate the development directions of methods for exhaust emission assessment from vehicles in motion.
EN
One of the ways to reduce exhaust emissions from vehicles is to replace worn-out shunting locomotives with road-rail tractors. The main purpose of this solution is to reduce the negative environmental impact of the vehicle and to reduce the fuel consumption compared to a shunting locomotive performing the same work. The tests on exhaust emissions of rail vehicles are carried out on an engine test bench, making it impossible to determine the environmental performance of these vehicles during real operation. Therefore, it is advisable to carry out measurements in real operating conditions in order to obtain reliable reference results. This enables the verification of vehicles ecological indicators in a wide range of operational work parameters. It is possible to obtain reliable results regarding the impact of the tested vehicle on the natural environment in this way and compare them with the applicable emission standards.
EN
Vehicles are equipped with more and more devices to improve the comfort of traveling. They are usually powered by electricity generated by the engine, which translates into an increase in its loads and, as a consequence, fuel consumption and emission. However, there is no information about the possible increase in the amount of other harmful components contained in the exhaust gases. Often this result is inadequate to that obtained during the operation of the vehicle, where the obtained fuel consumption is higher. As part of this article, tests were carried out in real hybrid vehicle traffic conditions on the same test route using an analyzer from the PEMS (Portable Emission Measurement System) ¬ SEMTECH DS Sensors Inc. The analysis of gaseous components of exhaust gases together with the exhaust mass flow probe and the GPS system made it possible to calculate the pollutant emission. On this basis, the actual mileage fuel consumption of the tested vehicle was calculated using the road emission of carbon-containing compounds (carbon balance method).
EN
The subject of this article is a comparative analysis of exhaust emissions for: HC (hydrocarbons), CO (carbon monoxide), CO2 (carbon dioxide), NOx (nitrogen oxides) from a passenger vehicle and a motorcycle in laboratory conditions on a dynamometer station. The first vehicle category was represented by a compression-ignition engine with a displacement volume of 1.3 dm3 and a power of 66 kW. The exhaust aftertreatment system included a catalytic converter and a particulate filter. The second category was a motorcycle, equipped with an engine with a displacement of 0.7 dm3 and a maximum power of 55 kW. The two-wheeled vehicle was equipped with a three-way catalytic converter. Speeds were modeled on the European type approval test - NEDC (New European Driving Cycle). In order to conduct a comparative analysis of exhaust emissions and fuel consumption from vehicles of different categories, the obtained results were presented in the form of emissions converted into passenger-kilometers (g/pkm). The research used modern equipment belonging to the PEMS (Portable Emissions Measurement Systems) group of devices. The analyzes carried out enable the decision making on which vehicles have a greater environmental impact due to their exhaust emissions, taking into account the distance and the number of passengers carried.
EN
The article analyzes the environmental costs which consisted of determining the annual cost for gases and particles released into the atmosphere by city buses meeting the Euro VI norm. To this end, exhaust emissions of a city bus equipped with a conventional drive system were performed. The vehicle had a length of 18m and was powered by a CI engine with a swept volume of 10,5 dm3, with a maximum power of 240 kW. In order to measure the ecological indicators, tests were performed in real driving conditions using the PEMS system. The apparatus made it possible to measure the concentration of gaseous compounds and particulate matter in the exhaust, which made it possible to determine the road exhaust emissions of the tested vehicle. The research was carried out on a test route including urban and suburban roads in accordance with legislative guidelines. The measurements showed that the bus met the exhaust emission limits determined on the basis of measuring windows defined in relation to the work generated by the drive system. In addition to information on the emissivity of the vehicle, the annual emissions from city buses meeting the Euro VI standard in Poland were also estimated. The information contained in the central vehicle register for the number of vehicles registered in Poland that meet the latest emission standards has been used for this purpose.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.