Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Influence of Mould Material on the Mechanical Properties of Wax Models

Kroma Arkadiusz, Brzęk P.

Archives of Foundry Engineering

2021

Vol. 21, iss. 3

48--52

The article presents results of research on the influence of the mould material on selected mechanical properties of wax models used for production of casting in investment casting method. The main goal was to compare the strength and hardness of samples produced in various media in order to analyse the applicability of the 3D printing technology as an alternative method of producing wax injection dies. To make the wax injection dies, it was decided to use a milled steel and 3D printed inserts made using FDM (Fused Deposition Modeling) / FFF (Fused Filament Fabrication) technology from HIPS (High Impact Polystyrene) and ABS (Acrylonitrile Butadiene Styrene). A semi-automatic vertical reciprocating injection moulding machine was used to produce the wax samples made of Freeman Flakes Wax Mixture – Super Pink. During injection moulding process, the mould temperature was measured each time before and after moulding with a pyrometer. Then, the samples were subjected to a static tensile test and a hardness test. It was shown that the mould material influences the strength properties of the wax samples, but not their final hardness.

Modern Reverse Engineering Methods Used to Modification of Jewelry

Kroma Arkadiusz, Adamczak Oliwia, Sika Robert, Górski Filip, Kuczko Wiesław, Grześkowiak Krzysztof

Advances in Science and Technology. Research Journal

2020

Vol. 14, no 4

298--306

The article presents the results of research aimed at redesigning a jewelry product with the use of modern reverse engineering methods. A detailed review of the literature was conducted and the essence of the application of this technology in the era of Industry 4.0 was presented. The 3D digitization of the research object was performed with the use of Aicon SmartSCAN-HE R8 and DAVID-SLS3 scanners. The obtained better quality file was edited in Autodesk Meshmixer 3.5 software. On the basis of the created model, a 3D print was made using FDM (Fused Deposition Modeling) and DPP (Daylight Polymer Printing) technology with two different materials – HIPS (High Impact Polystyrene) and photopolymer casting resin. The final stage of the work was the measurement of the surface roughness of the B101 (CuSn10P) tin-phosphorus alloy castings made using the method of investment casting.